diff mbox series

[v3,2/5] tty: serial: sh-sci: Add RZ/G2L SCIF DMA rx support

Message ID 20230331113346.170602-3-biju.das.jz@bp.renesas.com
State New
Headers show
Series Add RZ/G2L SCIFA DMAC/ SCI TX support | expand

Commit Message

Biju Das March 31, 2023, 11:33 a.m. UTC 
Add SCIF DMA rx support for RZ/G2L alike SoCs.

RZ/G2L alike SoCs use the same signal for both interrupt and DMA transfer
requests, so we must disable line interrupt while transferring DMA.

Apart from this, we must set FIFO trigger to 1 so that SCIF will request
DMA compared to other SoCs.

While at it replace the parameter irq to s->irqs[SCIx_RXI_IRQ] in
disable_irq_nosync() to match enable_irq() in sci_dma_rx_reenable_irq().

Based on a patch in the BSP by Long Luu
<long.luu.ur@renesas.com>

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v2->v3:
 * Replaced is_rz_scif_port to s->cfg->regtype check
 * Updated the code flow similar to SCIFA/SCIFB DMA rx handling.
v2:
 * New patch
---
 drivers/tty/serial/sh-sci.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index f70d06a03864..15743c2f3d3d 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1277,9 +1277,13 @@  static void sci_dma_rx_reenable_irq(struct sci_port *s)
 
 	/* Direct new serial port interrupts back to CPU */
 	scr = serial_port_in(port, SCSCR);
-	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
-		scr &= ~SCSCR_RDRQE;
+	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB ||
+	    s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) {
 		enable_irq(s->irqs[SCIx_RXI_IRQ]);
+		if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE)
+			scif_set_rtrg(port, s->rx_trigger);
+		else
+			scr &= ~SCSCR_RDRQE;
 	}
 	serial_port_out(port, SCSCR, scr | SCSCR_RIE);
 }
@@ -1516,7 +1520,8 @@  static enum hrtimer_restart sci_dma_rx_timer_fn(struct hrtimer *t)
 			tty_flip_buffer_push(&port->state->port);
 	}
 
-	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB ||
+	    s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE)
 		sci_dma_rx_submit(s, true);
 
 	sci_dma_rx_reenable_irq(s);
@@ -1640,7 +1645,8 @@  static void sci_request_dma(struct uart_port *port)
 
 		s->chan_rx_saved = s->chan_rx = chan;
 
-		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB ||
+		    s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE)
 			sci_dma_rx_submit(s, false);
 	}
 }
@@ -1693,9 +1699,15 @@  static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 		u16 ssr = serial_port_in(port, SCxSR);
 
 		/* Disable future Rx interrupts */
-		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
-			disable_irq_nosync(irq);
-			scr |= SCSCR_RDRQE;
+		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB ||
+		    s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) {
+			disable_irq_nosync(s->irqs[SCIx_RXI_IRQ]);
+			if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) {
+				scif_set_rtrg(port, 1);
+				scr |= SCSCR_RIE;
+			} else {
+				scr |= SCSCR_RDRQE;
+			}
 		} else {
 			if (sci_dma_rx_submit(s, false) < 0)
 				goto handle_pio;