diff mbox series

[v4] Input: tsc2007 - enable cansleep pendown GPIO

Message ID 20230328-tsc2007-sleep-v4-1-2ede92ec9b71@skidata.com
State New
Headers show
Series [v4] Input: tsc2007 - enable cansleep pendown GPIO | expand

Commit Message

Benjamin Bara March 30, 2023, 7:10 p.m. UTC 
From: Benjamin Bara <benjamin.bara@skidata.com>

When a hard IRQ is triggered, the soft IRQ, which decides if an actual
pen down happened, should always be triggered. This enables the usage of
"can_sleep" GPIO chips as "pen down" GPIO, as the value is not read
during the hard IRQ anymore. This might be the case if the GPIO chip is
an expander behind i2c.

Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
---
Hi!

I found a different approach to my problem:
If the primary IRQ handler is set to NULL, the default primary IRQ
handler simply triggers a soft IRQ handler wake up. As the hard IRQ is
only triggered when a pen down is detected, the gpiod_get_value() inside
tsc2007_is_pen_down() always returns true and therefore can be
neglected.

v3: https://lore.kernel.org/lkml/20230328-tsc2007-sleep-v3-1-5941e8dc0411@skidata.com/

----
v4:
- don't read value in hard IRQ

v3:
- extend commit message

v2:
- fix style mentioned by Christophe
---
 drivers/input/touchscreen/tsc2007_core.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)


---
base-commit: 197b6b60ae7bc51dd0814953c562833143b292aa
change-id: 20230328-tsc2007-sleep-f65953ae32d0

Best regards,

Comments

Dmitry Torokhov April 2, 2023, 5:51 a.m. UTC | #1 
Hi Benjamin,

On Thu, Mar 30, 2023 at 09:10:37PM +0200, Benjamin Bara wrote:
> From: Benjamin Bara <benjamin.bara@skidata.com>
> 
> When a hard IRQ is triggered, the soft IRQ, which decides if an actual
> pen down happened, should always be triggered. This enables the usage of
> "can_sleep" GPIO chips as "pen down" GPIO, as the value is not read
> during the hard IRQ anymore. This might be the case if the GPIO chip is
> an expander behind i2c.
> 
> Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
> Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
> ---
> Hi!
> 
> I found a different approach to my problem:
> If the primary IRQ handler is set to NULL, the default primary IRQ
> handler simply triggers a soft IRQ handler wake up. As the hard IRQ is
> only triggered when a pen down is detected, the gpiod_get_value() inside
> tsc2007_is_pen_down() always returns true and therefore can be
> neglected.

Don't you need to switch to gpio_get_valued_cansleep() in
tsc2007_is_pen_down() to actually allow sleeping gpios?

Thanks.
diff mbox series

Patch

diff --git a/drivers/input/touchscreen/tsc2007_core.c b/drivers/input/touchscreen/tsc2007_core.c
index 3c793fb70a0e..fa4a71e3ad52 100644
--- a/drivers/input/touchscreen/tsc2007_core.c
+++ b/drivers/input/touchscreen/tsc2007_core.c
@@ -172,19 +172,6 @@  static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t tsc2007_hard_irq(int irq, void *handle)
-{
-	struct tsc2007 *ts = handle;
-
-	if (tsc2007_is_pen_down(ts))
-		return IRQ_WAKE_THREAD;
-
-	if (ts->clear_penirq)
-		ts->clear_penirq();
-
-	return IRQ_HANDLED;
-}
-
 static void tsc2007_stop(struct tsc2007 *ts)
 {
 	ts->stopped = true;
@@ -376,7 +363,7 @@  static int tsc2007_probe(struct i2c_client *client)
 	}
 
 	err = devm_request_threaded_irq(&client->dev, ts->irq,
-					tsc2007_hard_irq, tsc2007_soft_irq,
+					NULL, tsc2007_soft_irq,
 					IRQF_ONESHOT,
 					client->dev.driver->name, ts);
 	if (err) {