diff mbox series

[4/4] arm64: dts: msm8953: Pad regs to 8 digits

Message ID 20230325112852.18841-4-a39.skl@gmail.com
State Accepted
Commit 26aae2310fd7375a5ca0dd772cd3bc57cf5e02bb
Headers show
Series [1/4] arm64: dts: msm8953: Replace xo_board with rpmcc sourced xo | expand

Commit Message

Adam Skladowski March 25, 2023, 11:28 a.m. UTC
Follow other dtses and pad regs to 8 digits.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8953.dtsi | 98 +++++++++++++--------------
 1 file changed, 49 insertions(+), 49 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 0a1bf1058cbf..684668170353 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -350,12 +350,12 @@  soc: soc@0 {
 
 		rpm_msg_ram: sram@60000 {
 			compatible = "qcom,rpm-msg-ram";
-			reg = <0x60000 0x8000>;
+			reg = <0x00060000 0x8000>;
 		};
 
 		hsusb_phy: phy@79000 {
 			compatible = "qcom,msm8953-qusb2-phy";
-			reg = <0x79000 0x180>;
+			reg = <0x00079000 0x180>;
 			#phy-cells = <0>;
 
 			clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
@@ -378,8 +378,8 @@  rng@e3000 {
 
 		tsens0: thermal-sensor@4a9000 {
 			compatible = "qcom,msm8953-tsens", "qcom,tsens-v2";
-			reg = <0x4a9000 0x1000>, /* TM */
-			      <0x4a8000 0x1000>; /* SROT */
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
 			#qcom,sensors = <16>;
 			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
@@ -389,12 +389,12 @@  tsens0: thermal-sensor@4a9000 {
 
 		restart@4ab000 {
 			compatible = "qcom,pshold";
-			reg = <0x4ab000 0x4>;
+			reg = <0x004ab000 0x4>;
 		};
 
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,msm8953-pinctrl";
-			reg = <0x1000000 0x300000>;
+			reg = <0x01000000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			gpio-ranges = <&tlmm 0 0 142>;
@@ -634,7 +634,7 @@  i2c_8_sleep: i2c-8-sleep-state {
 
 		gcc: clock-controller@1800000 {
 			compatible = "qcom,gcc-msm8953";
-			reg = <0x1800000 0x80000>;
+			reg = <0x01800000 0x80000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -654,25 +654,25 @@  gcc: clock-controller@1800000 {
 
 		tcsr_mutex: hwlock@1905000 {
 			compatible = "qcom,tcsr-mutex";
-			reg = <0x1905000 0x20000>;
+			reg = <0x01905000 0x20000>;
 			#hwlock-cells = <1>;
 		};
 
 		tcsr: syscon@1937000 {
 			compatible = "qcom,tcsr-msm8953", "syscon";
-			reg = <0x1937000 0x30000>;
+			reg = <0x01937000 0x30000>;
 		};
 
 		tcsr_phy_clk_scheme_sel: syscon@193f044 {
 			compatible = "qcom,tcsr-msm8953", "syscon";
-			reg = <0x193f044 0x4>;
+			reg = <0x0193f044 0x4>;
 		};
 
 		mdss: display-subsystem@1a00000 {
 			compatible = "qcom,mdss";
 
-			reg = <0x1a00000 0x1000>,
-			      <0x1ab0000 0x1040>;
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x1040>;
 			reg-names = "mdss_phys",
 				    "vbif_phys";
 
@@ -699,7 +699,7 @@  mdss: display-subsystem@1a00000 {
 
 			mdp: display-controller@1a01000 {
 				compatible = "qcom,msm8953-mdp5", "qcom,mdp5";
-				reg = <0x1a01000 0x89000>;
+				reg = <0x01a01000 0x89000>;
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
@@ -740,7 +740,7 @@  mdp5_intf2_out: endpoint {
 
 			dsi0: dsi@1a94000 {
 				compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
-				reg = <0x1a94000 0x400>;
+				reg = <0x01a94000 0x400>;
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
@@ -792,9 +792,9 @@  dsi0_out: endpoint {
 
 			dsi0_phy: phy@1a94400 {
 				compatible = "qcom,dsi-phy-14nm-8953";
-				reg = <0x1a94400 0x100>,
-				      <0x1a94500 0x300>,
-				      <0x1a94800 0x188>;
+				reg = <0x01a94400 0x100>,
+				      <0x01a94500 0x300>,
+				      <0x01a94800 0x188>;
 				reg-names = "dsi_phy",
 					    "dsi_phy_lane",
 					    "dsi_pll";
@@ -810,7 +810,7 @@  dsi0_phy: phy@1a94400 {
 
 			dsi1: dsi@1a96000 {
 				compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
-				reg = <0x1a96000 0x400>;
+				reg = <0x01a96000 0x400>;
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
@@ -859,9 +859,9 @@  dsi1_out: endpoint {
 
 			dsi1_phy: phy@1a96400 {
 				compatible = "qcom,dsi-phy-14nm-8953";
-				reg = <0x1a96400 0x100>,
-				      <0x1a96500 0x300>,
-				      <0x1a96800 0x188>;
+				reg = <0x01a96400 0x100>,
+				      <0x01a96500 0x300>,
+				      <0x01a96800 0x188>;
 				reg-names = "dsi_phy",
 					    "dsi_phy_lane",
 					    "dsi_pll";
@@ -878,7 +878,7 @@  dsi1_phy: phy@1a96400 {
 
 		apps_iommu: iommu@1e00000 {
 			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
-			ranges  = <0 0x1e20000 0x20000>;
+			ranges  = <0 0x01e20000 0x20000>;
 
 			clocks = <&gcc GCC_SMMU_CFG_CLK>,
 				 <&gcc GCC_APSS_TCU_ASYNC_CLK>;
@@ -914,11 +914,11 @@  iommu-ctx@16000 {
 
 		spmi_bus: spmi@200f000 {
 			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x200f000 0x1000>,
-			      <0x2400000 0x800000>,
-			      <0x2c00000 0x800000>,
-			      <0x3800000 0x200000>,
-			      <0x200a000 0x2100>;
+			reg = <0x0200f000 0x1000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x2100>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
 			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
@@ -933,7 +933,7 @@  spmi_bus: spmi@200f000 {
 
 		usb3: usb@70f8800 {
 			compatible = "qcom,msm8953-dwc3", "qcom,dwc3";
-			reg = <0x70f8800 0x400>;
+			reg = <0x070f8800 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -983,7 +983,7 @@  usb3_dwc3: usb@7000000 {
 		sdhc_1: mmc@7824900 {
 			compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
 
-			reg = <0x7824900 0x500>, <0x7824000 0x800>;
+			reg = <0x07824900 0x500>, <0x07824000 0x800>;
 			reg-names = "hc", "core";
 
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
@@ -1043,7 +1043,7 @@  opp-384000000 {
 		sdhc_2: mmc@7864900 {
 			compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
 
-			reg = <0x7864900 0x500>, <0x7864000 0x800>;
+			reg = <0x07864900 0x500>, <0x07864000 0x800>;
 			reg-names = "hc", "core";
 
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
@@ -1098,7 +1098,7 @@  opp-200000000 {
 
 		uart_0: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x78af000 0x200>;
+			reg = <0x078af000 0x200>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
@@ -1109,7 +1109,7 @@  uart_0: serial@78af000 {
 
 		i2c_1: i2c@78b5000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x78b5000 0x600>;
+			reg = <0x078b5000 0x600>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
@@ -1127,7 +1127,7 @@  i2c_1: i2c@78b5000 {
 
 		i2c_2: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x78b6000 0x600>;
+			reg = <0x078b6000 0x600>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
@@ -1145,7 +1145,7 @@  i2c_2: i2c@78b6000 {
 
 		i2c_3: i2c@78b7000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x78b7000 0x600>;
+			reg = <0x078b7000 0x600>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
@@ -1162,7 +1162,7 @@  i2c_3: i2c@78b7000 {
 
 		i2c_4: i2c@78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x78b8000 0x600>;
+			reg = <0x078b8000 0x600>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
@@ -1179,7 +1179,7 @@  i2c_4: i2c@78b8000 {
 
 		i2c_5: i2c@7af5000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x7af5000 0x600>;
+			reg = <0x07af5000 0x600>;
 			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
@@ -1196,7 +1196,7 @@  i2c_5: i2c@7af5000 {
 
 		i2c_6: i2c@7af6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x7af6000 0x600>;
+			reg = <0x07af6000 0x600>;
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
@@ -1213,7 +1213,7 @@  i2c_6: i2c@7af6000 {
 
 		i2c_7: i2c@7af7000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x7af7000 0x600>;
+			reg = <0x07af7000 0x600>;
 			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
@@ -1230,7 +1230,7 @@  i2c_7: i2c@7af7000 {
 
 		i2c_8: i2c@7af8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x7af8000 0x600>;
+			reg = <0x07af8000 0x600>;
 			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
@@ -1254,13 +1254,13 @@  intc: interrupt-controller@b000000 {
 
 		apcs: mailbox@b011000 {
 			compatible = "qcom,msm8953-apcs-kpss-global", "syscon";
-			reg = <0xb011000 0x1000>;
+			reg = <0x0b011000 0x1000>;
 			#mbox-cells = <1>;
 		};
 
 		timer@b120000 {
 			compatible = "arm,armv7-timer-mem";
-			reg = <0xb120000 0x1000>;
+			reg = <0x0b120000 0x1000>;
 			#address-cells = <0x01>;
 			#size-cells = <0x01>;
 			ranges;
@@ -1269,49 +1269,49 @@  frame@b121000 {
 				frame-number = <0>;
 				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb121000 0x1000>,
-				      <0xb122000 0x1000>;
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
 			};
 
 			frame@b123000 {
 				frame-number = <1>;
 				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb123000 0x1000>;
+				reg = <0x0b123000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b124000 {
 				frame-number = <2>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb124000 0x1000>;
+				reg = <0x0b124000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b125000 {
 				frame-number = <3>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb125000 0x1000>;
+				reg = <0x0b125000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b126000 {
 				frame-number = <4>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb126000 0x1000>;
+				reg = <0x0b126000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b127000 {
 				frame-number = <5>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb127000 0x1000>;
+				reg = <0x0b127000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b128000 {
 				frame-number = <6>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb128000 0x1000>;
+				reg = <0x0b128000 0x1000>;
 				status = "disabled";
 			};
 		};