diff mbox series

[v2,2/2] ARM: dts: qcom-sdx65: move status properties to end of nodes

Message ID 20230327191542.2765834-3-elder@linaro.org
State Superseded
Headers show
Series ARM: dts: qcom: sdx65: support IPA | expand

Commit Message

Alex Elder March 27, 2023, 7:15 p.m. UTC
Move a few device tree "status" properties so that they are the last
specified property, in "qcom-sdx65-mtp.dts" and "qcom-sdx65.dtsi".
Note that properties must always be specified before sub-nodes.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
---
 arch/arm/boot/dts/qcom-sdx65-mtp.dts | 6 +++---
 arch/arm/boot/dts/qcom-sdx65.dtsi    | 8 +++++---
 2 files changed, 8 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 72e25de0db5fc..57bc3b03d3aac 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -270,8 +270,8 @@  nand@0 {
 };
 
 &remoteproc_mpss {
-	status = "okay";
 	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
 };
 
 &usb {
@@ -283,14 +283,14 @@  &usb_dwc3 {
 };
 
 &usb_hsphy {
-	status = "okay";
 	vdda-pll-supply = <&vreg_l4b_0p88>;
 	vdda33-supply = <&vreg_l10b_3p08>;
 	vdda18-supply = <&vreg_l5b_1p8>;
+	status = "okay";
 };
 
 &usb_qmpphy {
-	status = "okay";
 	vdda-phy-supply = <&vreg_l4b_0p88>;
 	vdda-pll-supply = <&vreg_l1b_1p2>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index f35061e5b7fb8..2e1d008bccfd8 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -224,16 +224,15 @@  usb_hsphy: phy@ff4000 {
 				     "qcom,usb-snps-hs-7nm-phy";
 			reg = <0xff4000 0x120>;
 			#phy-cells = <0>;
-			status = "disabled";
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "ref";
 			resets = <&gcc GCC_QUSB2PHY_BCR>;
+			status = "disabled";
 		};
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
 			reg = <0x00ff6000 0x1c8>;
-			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -247,6 +246,8 @@  usb_qmpphy: phy@ff6000 {
 				 <&gcc GCC_USB3_PHY_BCR>;
 			reset-names = "phy", "common";
 
+			status = "disabled";
+
 			usb_ssphy: phy@ff6200 {
 				reg = <0x00ff6e00 0x160>,
 				      <0x00ff7000 0x1ec>,
@@ -394,7 +395,6 @@  mem_noc: interconnect@9680000 {
 		usb: usb@a6f8800 {
 			compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
 			reg = <0x0a6f8800 0x400>;
-			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -424,6 +424,8 @@  usb: usb@a6f8800 {
 
 			resets = <&gcc GCC_USB30_BCR>;
 
+			status = "disabled";
+
 			usb_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0x0a600000 0xcd00>;