@@ -6,6 +6,7 @@
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/clock/qcom,rpmh.h>
@@ -3391,47 +3392,26 @@ usb_2_hsphy: phy@88e3000 {
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
};
- usb_1_qmpphy: phy@88e9000 {
+ usb_1_qmpphy: phy@88e8000 {
compatible = "qcom,sm8150-qmp-usb3-dp-phy";
- reg = <0 0x088e9000 0 0x18c>,
- <0 0x088e8000 0 0x38>,
- <0 0x088ea000 0 0x40>;
- status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x088e8000 0 0x3000>;
+
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
- clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
<&gcc GCC_USB3_PHY_PRIM_BCR>;
reset-names = "phy", "common";
- usb_1_ssphy: phy@88e9200 {
- reg = <0 0x088e9200 0 0x200>,
- <0 0x088e9400 0 0x200>,
- <0 0x088e9c00 0 0x218>,
- <0 0x088e9600 0 0x200>,
- <0 0x088e9800 0 0x200>,
- <0 0x088e9a00 0 0x100>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_phy_pipe_clk_src";
- };
+ #clock-cells = <1>;
+ #phy-cells = <1>;
- usb_1_dpphy: phy@88ea200 {
- reg = <0 0x088ea200 0 0x200>,
- <0 0x088ea400 0 0x200>,
- <0 0x088eaa00 0 0x200>,
- <0 0x088ea600 0 0x200>,
- <0 0x088ea800 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
+ status = "disabled";
};
usb_2_qmpphy: phy@88eb000 {
@@ -3568,7 +3548,7 @@ usb_1_dwc3: usb@a600000 {
iommus = <&apps_smmu 0x140 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
};
};
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 48 ++++++++-------------------- 1 file changed, 14 insertions(+), 34 deletions(-)