diff mbox series

[v4,3/3] media: i2c: ov2685: Make reset gpio optional

Message ID 20230129-ov2685-improvements-v4-3-e71985c5c848@z3ntu.xyz
State Accepted
Commit 0482fbb1c1cc54c9589744690e38316f140647a8
Headers show
Series Improvements for OmniVision OV2685 | expand

Commit Message

Luca Weiss March 23, 2023, 5:57 p.m. UTC 
In some setups XSHUTDOWN is connected to DOVDD when it's unused,
therefore treat the reset gpio as optional.

Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 drivers/media/i2c/ov2685.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/ov2685.c b/drivers/media/i2c/ov2685.c
index fdf3e06133302..f119a93e7c647 100644
--- a/drivers/media/i2c/ov2685.c
+++ b/drivers/media/i2c/ov2685.c
@@ -807,7 +807,7 @@  static int ov2685_probe(struct i2c_client *client)
 	if (clk_get_rate(ov2685->xvclk) != OV2685_XVCLK_FREQ)
 		dev_warn(dev, "xvclk mismatched, modes are based on 24MHz\n");
 
-	ov2685->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	ov2685->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(ov2685->reset_gpio)) {
 		dev_err(dev, "Failed to get reset-gpios\n");
 		return -EINVAL;