@@ -3956,33 +3956,26 @@ dp_phy: dp-phy@88ea200 {
usb_2_qmpphy: phy@88eb000 {
compatible = "qcom,sdm845-qmp-usb3-uni-phy";
- reg = <0 0x088eb000 0 0x18c>;
+ reg = <0 0x088eb000 0 0x1000>;
status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_CLK>,
- <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "com_aux",
+ "pipe";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
<&gcc GCC_USB3_PHY_SEC_BCR>;
reset-names = "phy", "common";
-
- usb_2_ssphy: phy@88eb200 {
- reg = <0 0x088eb200 0 0x128>,
- <0 0x088eb400 0 0x1fc>,
- <0 0x088eb800 0 0x218>,
- <0 0x088eb600 0 0x70>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
};
usb_1: usb@a6f8800 {
@@ -4082,7 +4075,7 @@ usb_2_dwc3: usb@a800000 {
iommus = <&apps_smmu 0x760 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+ phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 31 +++++++++++----------------- 1 file changed, 12 insertions(+), 19 deletions(-)