@@ -742,8 +742,8 @@ gcc: clock-controller@100000 {
#power-domain-cells = <1>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&sleep_clk>,
- <&pcie0_lane>,
- <&pcie1_lane>,
+ <&pcie0_phy>,
+ <&pcie1_phy>,
<0>,
<&ufs_mem_phy 0>,
<&ufs_mem_phy 1>,
@@ -1767,7 +1767,7 @@ pcie0: pci@1c00000 {
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
<&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
- <&pcie0_lane>,
+ <&pcie0_phy>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -1800,7 +1800,7 @@ pcie0: pci@1c00000 {
power-domains = <&gcc PCIE_0_GDSC>;
power-domain-names = "gdsc";
- phys = <&pcie0_lane>;
+ phys = <&pcie0_phy>;
phy-names = "pciephy";
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -1814,15 +1814,23 @@ pcie0: pci@1c00000 {
pcie0_phy: phy@1c06000 {
compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
- reg = <0 0x01c06000 0 0x200>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c06000 0 0x2000>;
+
clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_CLKREF_EN>,
- <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
@@ -1831,19 +1839,6 @@ pcie0_phy: phy@1c06000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie0_lane: phy@1c06200 {
- reg = <0 0x01c06e00 0 0x200>, /* tx */
- <0 0x01c07000 0 0x200>, /* rx */
- <0 0x01c06200 0 0x200>, /* pcs */
- <0 0x01c06600 0 0x200>; /* pcs_pcie */
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
-
- #clock-cells = <0>;
- #phy-cells = <0>;
- clock-output-names = "pcie_0_pipe_clk";
- };
};
pcie1: pci@1c08000 {
@@ -1883,7 +1878,7 @@ pcie1: pci@1c08000 {
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
- <&pcie1_lane>,
+ <&pcie1_phy>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -1914,7 +1909,7 @@ pcie1: pci@1c08000 {
power-domains = <&gcc PCIE_1_GDSC>;
power-domain-names = "gdsc";
- phys = <&pcie1_lane>;
+ phys = <&pcie1_phy>;
phy-names = "pciephy";
perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>;
@@ -1926,17 +1921,25 @@ pcie1: pci@1c08000 {
status = "disabled";
};
- pcie1_phy: phy@1c0f000 {
+ pcie1_phy: phy@1c0e000 {
compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy";
- reg = <0 0x01c0f000 0 0x200>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c0e000 0 0x2000>;
+
clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_CLKREF_EN>,
- <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_1_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
@@ -1945,21 +1948,6 @@ pcie1_phy: phy@1c0f000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie1_lane: phy@1c0e000 {
- reg = <0 0x01c0e000 0 0x200>, /* tx */
- <0 0x01c0e200 0 0x300>, /* rx */
- <0 0x01c0f200 0 0x200>, /* pcs */
- <0 0x01c0e800 0 0x200>, /* tx */
- <0 0x01c0ea00 0 0x300>, /* rx */
- <0 0x01c0f400 0 0xc00>; /* pcs_pcie */
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe0";
-
- #clock-cells = <0>;
- #phy-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk";
- };
};
config_noc: interconnect@1500000 {
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 82 ++++++++++++---------------- 1 file changed, 35 insertions(+), 47 deletions(-)