@@ -19,3 +19,4 @@ obj-y += pinctrl-qcs404.o
obj-y += pinctrl-sdm845.o
obj-$(CONFIG_TARGET_QCS404EVB) += clock-qcs404.o
obj-$(CONFIG_TARGET_QCS404EVB) += sysmap-qcs404.o
+obj-$(CONFIG_TARGET_QRB4210RB2) += clock-qrb4210-rb2.o
new file mode 100644
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Clock drivers for Qualcomm SM6115
+ *
+ * (C) Copyright 2023 Bhupesh Sharma <bhupesh.sharma@linaro.org>
+ *
+ * Based on Kernel driver, simplified
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include "clock-snapdragon.h"
+
+#include <dt-bindings/clock/qcom,gcc-sm6115.h>
+
+/* GPLL clock control registers */
+#define GPLL0_STATUS_ACTIVE BIT(31)
+
+#define GCC_GLOBAL_EN_BASE (0x84000)
+#define GCC_CLOBAL_PERIPHERALS_EN BIT(5)
+
+#define GCC_APCS_CLOCK_BRANCH_ENA_VOTE_1 (0x7900C)
+
+#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
+
+struct freq_tbl {
+ uint freq;
+ uint src;
+ u8 pre_div;
+ u16 m;
+ u16 n;
+};
+
+static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = {
+ F(7372800, CFG_CLK_SRC_GPLL0_OUT_AUX2, 1, 384, 15625),
+ F(14745600, CFG_CLK_SRC_GPLL0_OUT_AUX2, 1, 768, 15625),
+ F(19200000, CFG_CLK_SRC_CXO, 1, 0, 0),
+ F(29491200, CFG_CLK_SRC_GPLL0_OUT_AUX2, 1, 1536, 15625),
+ F(32000000, CFG_CLK_SRC_GPLL0_OUT_AUX2, 1, 8, 75),
+ F(48000000, CFG_CLK_SRC_GPLL0_OUT_AUX2, 1, 4, 25),
+ F(64000000, CFG_CLK_SRC_GPLL0_OUT_AUX2, 1, 16, 75),
+ F(75000000, CFG_CLK_SRC_GPLL0_OUT_AUX2, 4, 0, 0),
+ F(80000000, CFG_CLK_SRC_GPLL0_OUT_AUX2, 1, 4, 15),
+ F(96000000, CFG_CLK_SRC_GPLL0_OUT_AUX2, 1, 8, 25),
+ F(100000000, CFG_CLK_SRC_GPLL0_OUT_AUX2, 3, 0, 0),
+ F(102400000, CFG_CLK_SRC_GPLL0_OUT_AUX2, 1, 128, 375),
+ F(112000000, CFG_CLK_SRC_GPLL0_OUT_AUX2, 1, 28, 75),
+ F(117964800, CFG_CLK_SRC_GPLL0_OUT_AUX2, 1, 6144, 15625),
+ F(120000000, CFG_CLK_SRC_GPLL0_OUT_AUX2, 2.5, 0, 0),
+ F(128000000, CFG_CLK_SRC_GPLL6_OUT_MAIN, 3, 0, 0),
+ { }
+};
+
+static const struct bcr_regs uart4_regs = {
+ .cfg_rcgr = UART4_APPS_CFG_RCGR,
+ .cmd_rcgr = UART4_APPS_CMD_RCGR,
+ .M = UART4_APPS_M,
+ .N = UART4_APPS_N,
+ .D = UART4_APPS_D,
+};
+
+const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate)
+{
+ if (!f)
+ return NULL;
+
+ if (!f->freq)
+ return f;
+
+ for (; f->freq; f++)
+ if (rate <= f->freq)
+ return f;
+
+ /* Default to our fastest rate */
+ return f - 1;
+}
+
+static int clk_init_uart(struct msm_clk_priv *priv, uint rate)
+{
+ const struct freq_tbl *freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s0_clk_src, rate);
+
+ clk_rcg_set_rate_mnd(priv->base, &uart4_regs,
+ freq->pre_div, freq->m, freq->n, freq->src);
+
+ return 0;
+}
+
+ulong msm_set_rate(struct clk *clk, ulong rate)
+{
+ struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+
+ switch (clk->id) {
+ case GCC_QUPV3_WRAP0_S4_CLK: /* UART4 */
+ return clk_init_uart(priv, rate);
+ default:
+ return 0;
+ }
+
+ return 0;
+}
+
+int msm_enable(struct clk *clk)
+{
+ return 0;
+}
@@ -167,6 +167,7 @@ static const struct udevice_id msm_clk_ids[] = {
{ .compatible = "qcom,gcc-msm8996" },
{ .compatible = "qcom,gcc-apq8096" },
{ .compatible = "qcom,gcc-sdm845" },
+ { .compatible = "qcom,gcc-sm6115" },
{ .compatible = "qcom,gcc-qcs404" },
{ }
};
@@ -10,6 +10,8 @@
#define CFG_CLK_SRC_CXO (0 << 8)
#define CFG_CLK_SRC_GPLL0 (1 << 8)
#define CFG_CLK_SRC_GPLL0_EVEN (6 << 8)
+#define CFG_CLK_SRC_GPLL0_OUT_AUX2 (2 << 8)
+#define CFG_CLK_SRC_GPLL6_OUT_MAIN (4 << 8)
#define CFG_CLK_SRC_MASK (7 << 8)
struct pll_vote_clk {
Currently the SM6115 clock driver initializes clocks for debug UART only. Along with this import "qcom,gcc-sm6115.h" header from Linux mainline to support DT bindings. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- arch/arm/mach-snapdragon/Makefile | 1 + arch/arm/mach-snapdragon/clock-qrb4210-rb2.c | 110 +++++++++++++++++++ arch/arm/mach-snapdragon/clock-snapdragon.c | 1 + arch/arm/mach-snapdragon/clock-snapdragon.h | 2 + 4 files changed, 114 insertions(+) create mode 100644 arch/arm/mach-snapdragon/clock-qrb4210-rb2.c