@@ -22,7 +22,7 @@ disp_dvdd_vreg: disp-dvdd-vreg {
enable-active-high;
gpio = <&pmi8998_gpios 10 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&disp_dvdd_en>;
+ pinctrl-0 = <&four_k_disp_dcdc_en>;
};
};
@@ -60,7 +60,7 @@ &pmi8998_gpios {
"SPMI_I2C_SEL",
"NC";
- disp_dvdd_en: disp-dvdd-en-active-state {
+ four_k_disp_dcdc_en: 4k-disp-dcdc-en-state {
pins = "gpio10";
function = "normal";
bias-disable;
@@ -21,7 +21,7 @@ / {
clocks {
div1_mclk: divclk1 {
compatible = "gpio-gate-clock";
- pinctrl-0 = <&audio_mclk_pin>;
+ pinctrl-0 = <&div_clk1>;
pinctrl-names = "default";
clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
#clock-cells = <0>;
@@ -46,7 +46,7 @@ cam0_vdig_vreg: cam0-vdig {
enable-active-high;
gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&cam0_vdig_default>;
+ pinctrl-0 = <&main_cam_pwr_en>;
};
cam1_vdig_vreg: cam1-vdig {
@@ -56,7 +56,7 @@ cam1_vdig_vreg: cam1-vdig {
enable-active-high;
gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&cam1_vdig_default>;
+ pinctrl-0 = <&chat_cam_pwr_en>;
vin-supply = <&vreg_s3a_1p35>;
};
@@ -67,7 +67,7 @@ cam_vio_vreg: cam-vio-vreg {
enable-active-high;
gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&cam_vio_default>;
+ pinctrl-0 = <&main_cam_pwr_io_en>;
vin-supply = <&vreg_lvs1a_1p8>;
};
@@ -92,15 +92,14 @@ extcon_usb: extcon-usb {
id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;
vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&usb_extcon_active &usb_vbus_active>;
+ pinctrl-0 = <&cc_dir_default &usb_detect_en>;
};
gpio-keys {
compatible = "gpio-keys";
label = "Side buttons";
pinctrl-names = "default";
- pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>,
- <&cam_snapshot_pin_a>;
+ pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>;
button-vol-down {
label = "Volume Down";
gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
@@ -131,7 +130,7 @@ gpio-hall-sensor {
compatible = "gpio-keys";
label = "Hall sensors";
pinctrl-names = "default";
- pinctrl-0 = <&hall_sensor0_default>;
+ pinctrl-0 = <&acc_cover_open>;
event-hall-sensor0 {
label = "Cover Hall Sensor";
@@ -189,7 +188,7 @@ vibrator {
compatible = "gpio-vibrator";
enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&vib_default>;
+ pinctrl-0 = <&vib_ldo_en>;
};
};
@@ -263,7 +262,7 @@ proximity@29 {
vdd-supply = <&cam_vio_vreg>;
pinctrl-names = "default";
- pinctrl-0 = <&tof_int &tof_reset>;
+ pinctrl-0 = <&tof_int_n &tof_reset>;
};
};
@@ -338,7 +337,7 @@ &pm8998_gpios {
"OPTION_2 (DISALLOWED)",
"PM_SLB (DISALLOWED)";
- vol_down_pin_a: vol-down-active-state {
+ vol_down_n: vol-down-n-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
@@ -346,7 +345,7 @@ vol_down_pin_a: vol-down-active-state {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- cam_focus_pin_a: cam-focus-btn-active-state {
+ focus_n: focus-n-state {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
@@ -354,7 +353,7 @@ cam_focus_pin_a: cam-focus-btn-active-state {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- cam_snapshot_pin_a: cam-snapshot-btn-active-state {
+ snapshot_n: snapshot-n-state {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
bias-pull-up;
@@ -362,7 +361,7 @@ cam_snapshot_pin_a: cam-snapshot-btn-active-state {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
- audio_mclk_pin: audio-mclk-pin-active-state {
+ div_clk1: div-clk1-state {
pins = "gpio13";
function = "func2";
power-source = <0>;
@@ -385,7 +384,7 @@ &pmi8998_gpios {
"SPMI_I2C_SEL",
"NC";
- cam_vio_default: cam-vio-active-state {
+ main_cam_pwr_io_en: main-cam-pwr-io-en-state {
pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL;
bias-disable;
@@ -395,7 +394,7 @@ cam_vio_default: cam-vio-active-state {
power-source = <1>;
};
- vib_default: vib-en-state {
+ vib_ldo_en: vib-ldo-en-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
bias-disable;
@@ -790,7 +789,7 @@ &tlmm {
"RFFE1_DATA",
"RFFE1_CLK";
- mdp_vsync_n: mdp-vsync-n-state {
+ mdp_vsync_p: mdp-vsync-p-state {
pins = "gpio10";
function = "mdp_vsync_a";
drive-strength = <2>;
@@ -805,14 +804,14 @@ nfc_ven: nfc-ven-state {
output-low;
};
- msm_mclk0_default: msm-mclk0-active-state {
+ cam_mclk0_active: cam-mclk0-active-state {
pins = "gpio13";
function = "cam_mclk";
drive-strength = <2>;
bias-disable;
};
- msm_mclk1_default: msm-mclk1-active-state {
+ cam_mclk1_active: cam-mclk1-active-state {
pins = "gpio14";
function = "cam_mclk";
drive-strength = <2>;
@@ -833,14 +832,14 @@ cci1_default: cci1-default-state {
drive-strength = <2>;
};
- cam0_vdig_default: cam0-vdig-default-state {
+ main_cam_pwr_en: main-cam-pwr-en-default-state {
pins = "gpio21";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- tof_int: tof-int-state {
+ tof_int_n: tof-int-n-state {
pins = "gpio22";
function = "gpio";
bias-pull-up;
@@ -848,28 +847,28 @@ tof_int: tof-int-state {
input-enable;
};
- cam1_vdig_default: cam1-vdig-default-state {
+ chat_cam_pwr_en: chat-cam-pwr-en-default-state {
pins = "gpio25";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- usb_extcon_active: usb-extcon-active-state {
- pins = "gpio38";
+ tof_reset: tof-reset-state {
+ pins = "gpio27";
function = "gpio";
bias-disable;
- drive-strength = <16>;
+ drive-strength = <2>;
};
- tof_reset: tof-reset-state {
- pins = "gpio27";
+ cc_dir_default: cc-dir-active-state {
+ pins = "gpio38";
function = "gpio";
bias-disable;
- drive-strength = <2>;
+ drive-strength = <16>;
};
- hall_sensor0_default: acc-cover-open-state {
+ acc_cover_open: acc-cover-open-state {
pins = "gpio124";
function = "gpio";
bias-disable;
@@ -884,7 +883,7 @@ ts_int_n: ts-int-n-state {
bias-pull-up;
};
- usb_vbus_active: usb-vbus-active-state {
+ usb_detect_en: usb-detect-en-active-state {
pins = "gpio128";
function = "gpio";
bias-disable;
With the gpio-line-names in place coming from SONY themselves, we can now make the pin nodes and their labels to more closely resemble the actual thing. 4k has been renamed to four_k due to dtc limitations. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../dts/qcom/msm8998-sony-xperia-yoshino-maple.dts | 4 +- .../boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 59 +++++++++++----------- 2 files changed, 31 insertions(+), 32 deletions(-)