new file mode 100644
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/amd/amd,pensando-elba-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD Pensando Elba SoC Controller
+
+description:
+ The AMD Pensando Elba SoC Controller is a SPI connected device with essential
+ control/status registers accessed on chip select 0. This device is present
+ in all Pensando SoC based designs.
+
+maintainers:
+ - Brad Larson <blarson@amd.com>
+
+properties:
+ compatible:
+ enum:
+ - amd,pensando-elba-ctrl
+
+ reg:
+ maxItems: 1
+
+ '#reset-cells':
+ const: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - '#reset-cells'
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ system-controller@0 {
+ compatible = "amd,pensando-elba-ctrl";
+ reg = <0>;
+ spi-max-frequency = <12000000>;
+ interrupt-parent = <&porta>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ #reset-cells = <1>;
+ };
+ };
+
+...
Support the AMD Pensando Elba SoC Controller which is a SPI connected device providing a miscellaneous set of essential board control/status registers. This device is present in all Pensando SoC based designs. Signed-off-by: Brad Larson <blarson@amd.com> --- v11 changes: - Fixed the compatible which should have stayed as 'amd,pensando-elba-ctrl', the commit message, and the filename - Reference spi-peripheral-props - Delete spi-max-frequency - Remove num-cs from example v10 changes: - Property renamed to amd,pensando-ctrl - Driver is renamed and moved to soc/drivers/amd affecting binding - Delete cs property, driver handles device node creation from parent num-cs fixing schema reg error in a different way v9 changes: - Instead of four nodes, one per chip-select, a single node is used with reset-cells in the parent. - No MFD API is used anymore in the driver so it made sense to move this to drivers/spi. - This driver is common for all Pensando SoC based designs so changed the name to pensando-sr.c to not make it Elba SoC specific. - Added property cs for the chip-select number which is used by the driver to create /dev/pensr0.<cs> --- .../soc/amd/amd,pensando-elba-ctrl.yaml | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/amd/amd,pensando-elba-ctrl.yaml