@@ -395,6 +395,9 @@
#define COMP_MAX_COEFF 25
#define RX_NUM_CLKS_MAX 5
+/* NPL clock is expected */
+#define RX_MACRO_FLAG_HAS_NPL_CLOCK BIT(0)
+
struct comp_coeff_val {
u8 lsb;
u8 msb;
@@ -3491,7 +3494,10 @@ static int rx_macro_register_mclk_output(struct rx_macro *rx)
struct clk_init_data init;
int ret;
- parent_clk_name = __clk_get_name(rx->npl);
+ if (rx->npl)
+ parent_clk_name = __clk_get_name(rx->npl);
+ else
+ parent_clk_name = __clk_get_name(rx->mclk);
init.name = clk_name;
init.ops = &swclk_gate_ops;
@@ -3521,10 +3527,13 @@ static const struct snd_soc_component_driver rx_macro_component_drv = {
static int rx_macro_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ kernel_ulong_t flags;
struct rx_macro *rx;
void __iomem *base;
int ret;
+ flags = (kernel_ulong_t)device_get_match_data(dev);
+
rx = devm_kzalloc(dev, sizeof(*rx), GFP_KERNEL);
if (!rx)
return -ENOMEM;
@@ -3541,9 +3550,11 @@ static int rx_macro_probe(struct platform_device *pdev)
if (IS_ERR(rx->mclk))
return PTR_ERR(rx->mclk);
- rx->npl = devm_clk_get(dev, "npl");
- if (IS_ERR(rx->npl))
- return PTR_ERR(rx->npl);
+ if (flags & RX_MACRO_FLAG_HAS_NPL_CLOCK) {
+ rx->npl = devm_clk_get(dev, "npl");
+ if (IS_ERR(rx->npl))
+ return PTR_ERR(rx->npl);
+ }
rx->fsgen = devm_clk_get(dev, "fsgen");
if (IS_ERR(rx->fsgen))
@@ -3655,10 +3666,22 @@ static int rx_macro_remove(struct platform_device *pdev)
}
static const struct of_device_id rx_macro_dt_match[] = {
- { .compatible = "qcom,sc7280-lpass-rx-macro" },
- { .compatible = "qcom,sm8250-lpass-rx-macro" },
- { .compatible = "qcom,sm8450-lpass-rx-macro" },
- { .compatible = "qcom,sc8280xp-lpass-rx-macro" },
+ {
+ .compatible = "qcom,sc7280-lpass-rx-macro",
+ .data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK,
+
+ }, {
+ .compatible = "qcom,sm8250-lpass-rx-macro",
+ .data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK,
+ }, {
+ .compatible = "qcom,sm8450-lpass-rx-macro",
+ .data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK,
+ }, {
+ .compatible = "qcom,sm8550-lpass-rx-macro",
+ }, {
+ .compatible = "qcom,sc8280xp-lpass-rx-macro",
+ .data = (void *)RX_MACRO_FLAG_HAS_NPL_CLOCK,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, rx_macro_dt_match);
Add support for the RX macro codec on Qualcomm SM8550. SM8550 does not use NPL clock, thus add flags allowing to skip it. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- sound/soc/codecs/lpass-rx-macro.c | 39 ++++++++++++++++++++++++------- 1 file changed, 31 insertions(+), 8 deletions(-)