@@ -325,7 +325,6 @@ choice
config ARCH_MULTIPLATFORM
bool "Allow multiple platforms to be selected"
depends on MMU
- select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_HAS_SG_CHAIN
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
@@ -340,7 +339,6 @@ config ARCH_MULTIPLATFORM
config ARM_SINGLE_ARMV7M
bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
depends on !MMU
- select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_NVIC
select AUTO_ZRELADDR
select CLKSRC_OF
@@ -354,12 +352,12 @@ config ARM_SINGLE_ARMV7M
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
- select ARCH_REQUIRE_GPIOLIB
select AUTO_ZRELADDR
select CLKSRC_MMIO
select COMMON_CLK
select CPU_ARM720T
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
select MFD_SYSCON
select SOC_BUS
help
@@ -367,10 +365,10 @@ config ARCH_CLPS711X
config ARCH_GEMINI
bool "Cortina Systems Gemini"
- select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select CPU_FA526
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
help
Support for the Cortina Systems Gemini family SoCs
@@ -391,7 +389,6 @@ config ARCH_EBSA110
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_PATCH_PHYS_VIRT
select ARM_VIC
@@ -400,6 +397,7 @@ config ARCH_EP93XX
select CLKSRC_MMIO
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
help
This enables support for the Cirrus EP93xx series of CPUs.
@@ -440,9 +438,9 @@ config ARCH_IOP13XX
config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
- select ARCH_REQUIRE_GPIOLIB
select CPU_XSCALE
select GPIO_IOP
+ select GPIOLIB
select NEED_RET_TO_USER
select PCI
select PLAT_IOP
@@ -453,9 +451,9 @@ config ARCH_IOP32X
config ARCH_IOP33X
bool "IOP33x-based"
depends on MMU
- select ARCH_REQUIRE_GPIOLIB
select CPU_XSCALE
select GPIO_IOP
+ select GPIOLIB
select NEED_RET_TO_USER
select PCI
select PLAT_IOP
@@ -466,12 +464,12 @@ config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
select ARCH_HAS_DMA_SET_COHERENT_MASK
- select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
select CPU_XSCALE
select DMABOUNCE if PCI
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
select MIGHT_HAVE_PCI
select NEED_MACH_IO_H
select USB_EHCI_BIG_ENDIAN_DESC
@@ -481,9 +479,9 @@ config ARCH_IXP4XX
config ARCH_DOVE
bool "Marvell Dove"
- select ARCH_REQUIRE_GPIOLIB
select CPU_PJ4
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
select MIGHT_HAVE_PCI
select MULTI_IRQ_HANDLER
select MVEBU_MBUS
@@ -497,10 +495,10 @@ config ARCH_DOVE
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
- select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select CPU_ARM922T
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
select NEED_MACH_MEMORY_H
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
@@ -508,11 +506,11 @@ config ARCH_KS8695
config ARCH_W90X900
bool "Nuvoton W90X900 CPU"
- select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
help
Support for Nuvoton (Winbond logic dept.) ARM9 processor,
At present, the w90x900 has been renamed nuc900, regarding
@@ -524,13 +522,13 @@ config ARCH_W90X900
config ARCH_LPC32XX
bool "NXP LPC32XX"
- select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select CLKDEV_LOOKUP
select CLKSRC_LPC32XX
select COMMON_CLK
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
select USE_OF
help
Support for the NXP LPC32XX family of processors
@@ -539,7 +537,6 @@ config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
select ARCH_MTD_XIP
- select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select AUTO_ZRELADDR
select COMMON_CLK
@@ -550,6 +547,7 @@ config ARCH_PXA
select CPU_XSCALE if !CPU_XSC3
select GENERIC_CLOCKEVENTS
select GPIO_PXA
+ select GPIOLIB
select HAVE_IDE
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
@@ -580,7 +578,6 @@ config ARCH_RPC
config ARCH_SA1100
bool "SA1100-based"
select ARCH_MTD_XIP
- select ARCH_REQUIRE_GPIOLIB
select ARCH_SPARSEMEM_ENABLE
select CLKDEV_LOOKUP
select CLKSRC_MMIO
@@ -589,6 +586,7 @@ config ARCH_SA1100
select CPU_FREQ
select CPU_SA1100
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
select HAVE_IDE
select IRQ_DOMAIN
select ISA
@@ -600,12 +598,12 @@ config ARCH_SA1100
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
- select ARCH_REQUIRE_GPIOLIB
select ATAGS
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
+ select GPIOLIB
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
@@ -621,12 +619,12 @@ config ARCH_S3C24XX
config ARCH_DAVINCI
bool "TI DaVinci"
select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CPU_ARM926T
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
+ select GPIOLIB
select HAVE_IDE
select USE_OF
select ZONE_DMA
@@ -638,11 +636,11 @@ config ARCH_OMAP1
depends on MMU
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
- select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
+ select GPIOLIB
select HAVE_IDE
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
@@ -860,7 +858,7 @@ source "arch/arm/mach-zynq/Kconfig"
config ARCH_EFM32
bool "Energy Micro efm32"
depends on ARM_SINGLE_ARMV7M
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
help
Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
processors.
@@ -1,8 +1,8 @@
menuconfig ARCH_AT91
bool "Atmel SoCs"
depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7
- select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK_AT91
+ select GPIOLIB
select PINCTRL
select SOC_BUS
@@ -17,7 +17,7 @@ config ARCH_BCM_IPROC
select ARM_GLOBAL_TIMER
select COMMON_CLK_IPROC
select CLKSRC_MMIO
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select ARM_AMBA
select PINCTRL
help
@@ -80,7 +80,7 @@ comment "KONA architected SoCs"
config ARCH_BCM_MOBILE
bool
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_GIC
@@ -137,7 +137,7 @@ comment "Other Architectures"
config ARCH_BCM2835
bool "Broadcom BCM2835 family"
depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select ARM_AMBA
select ARM_ERRATA_411920 if ARCH_MULTI_V6
select ARM_TIMER_SP804
@@ -177,7 +177,6 @@ config ARCH_BRCMSTB
select BRCMSTB_L2_IRQ
select BCM7120_L2_IRQ
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
- select ARCH_WANT_OPTIONAL_GPIOLIB
select SOC_BRCMSTB
help
Say Y if you intend to run the kernel on a Broadcom ARM-based STB
@@ -2,11 +2,11 @@ menuconfig ARCH_BERLIN
bool "Marvell Berlin SoCs"
depends on ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
- select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
select DW_APB_ICTL
select DW_APB_TIMER_OF
select GENERIC_IRQ_CHIP
+ select GPIOLIB
select MFD_SYSCON
select PINCTRL
@@ -1,10 +1,10 @@
config ARCH_DIGICOLOR
bool "Conexant Digicolor SoC Support"
depends on ARCH_MULTI_V7
- select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select DIGICOLOR_TIMER
select GENERIC_IRQ_CHIP
+ select GPIOLIB
select MFD_SYSCON
select PINCTRL
select PINCTRL_DIGICOLOR
@@ -12,12 +12,12 @@ menuconfig ARCH_EXYNOS
depends on ARCH_MULTI_V7
select ARCH_HAS_BANDGAP
select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_GIC
select COMMON_CLK_SAMSUNG
select EXYNOS_THERMAL
select EXYNOS_PMU
+ select GPIOLIB
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -1,10 +1,10 @@
menuconfig ARCH_MXC
bool "Freescale i.MX family"
depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
- select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_IMX_GPT
select GENERIC_IRQ_CHIP
+ select GPIOLIB
select PINCTRL
select PM_OPP if PM
select SOC_BUS
@@ -32,9 +32,9 @@ config ARCH_INTEGRATOR_AP
config INTEGRATOR_IMPD1
bool "Include support for Integrator/IM-PD1"
depends on ARCH_INTEGRATOR_AP
- select ARCH_REQUIRE_GPIOLIB
select ARM_VIC
- select GPIO_PL061 if GPIOLIB
+ select GPIO_PL061
+ select GPIOLIB
help
The IM-PD1 is an add-on logic module for the Integrator which
allows ARM(R) Ltd PrimeCells to be developed and evaluated.
@@ -1,7 +1,7 @@
menuconfig ARCH_MESON
bool "Amlogic Meson SoCs"
depends on ARCH_MULTI_V7
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select GENERIC_IRQ_CHIP
select ARM_GIC
select CACHE_L2X0
@@ -1,8 +1,8 @@
menuconfig ARCH_MMP
bool "Marvell PXA168/910/MMP2"
depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
- select ARCH_REQUIRE_GPIOLIB
select GPIO_PXA
+ select GPIOLIB
select PINCTRL
select PLAT_PXA
help
@@ -5,7 +5,7 @@ menuconfig ARCH_MOXART
select ARM_DMA_MEM_BUFFERABLE
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select PHYLIB if NETDEVICES
help
Say Y here if you want to run your kernel on hardware with a
@@ -1,8 +1,8 @@
menuconfig ARCH_MV78XX0
bool "Marvell MV78xx0"
depends on ARCH_MULTI_V5
- select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
+ select GPIOLIB
select MVEBU_MBUS
select PCI
select PLAT_ORION_LEGACY
@@ -8,7 +8,7 @@ menuconfig ARCH_MVEBU
select SOC_BUS
select MVEBU_MBUS
select ZONE_DMA if ARM_LPAE
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select PCI_QUIRKS if PCI
select OF_ADDRESS_PCI
@@ -119,8 +119,8 @@ config MACH_DOVE
config MACH_KIRKWOOD
bool "Marvell Kirkwood boards"
depends on ARCH_MULTI_V5
- select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
+ select GPIOLIB
select KIRKWOOD_CLK
select MACH_MVEBU_ANY
select ORION_IRQCHIP
@@ -15,8 +15,8 @@ config SOC_IMX28
config ARCH_MXS
bool "Freescale MXS (i.MX23, i.MX28) support"
depends on ARCH_MULTI_V5
- select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
+ select GPIOLIB
select PINCTRL
select SOC_BUS
select SOC_IMX23
@@ -1,12 +1,12 @@
menuconfig ARCH_NOMADIK
bool "ST-Ericsson Nomadik"
depends on ARCH_MULTI_V5
- select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
select CLKSRC_NOMADIK_MTU
select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
select CPU_ARM926T
+ select GPIOLIB
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_NOMADIK
@@ -88,9 +88,9 @@ config ARCH_OMAP2PLUS
select ARCH_HAS_BANDGAP
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
- select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
+ select GPIOLIB
select MACH_OMAP_GENERIC
select MEMORY
select MFD_SYSCON
@@ -1,9 +1,9 @@
menuconfig ARCH_ORION5X
bool "Marvell Orion"
depends on MMU && ARCH_MULTI_V5
- select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
select MVEBU_MBUS
select PCI
select PLAT_ORION_LEGACY
@@ -1,8 +1,8 @@
config ARCH_PICOXCELL
bool "Picochip PicoXcell"
depends on ARCH_MULTI_V6
- select ARCH_REQUIRE_GPIOLIB
select ARM_VIC
select DW_APB_TIMER_OF
+ select GPIOLIB
select HAVE_TCM
select NO_IOPORT_MAP
@@ -3,8 +3,8 @@ menuconfig ARCH_SIRF
depends on ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
- select ARCH_REQUIRE_GPIOLIB
select GENERIC_IRQ_CHIP
+ select GPIOLIB
select NO_IOPORT_MAP
select REGMAP
select PINCTRL
@@ -4,10 +4,10 @@ config ARCH_ROCKCHIP
select PINCTRL
select PINCTRL_ROCKCHIP
select ARCH_HAS_RESET_CONTROLLER
- select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_GIC
select CACHE_L2X0
+ select GPIOLIB
select HAVE_ARM_ARCH_TIMER
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
@@ -11,7 +11,7 @@ if ARCH_S3C24XX
config PLAT_S3C24XX
def_bool y
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select NO_IOPORT_MAP
select S3C_DEV_NAND
select IRQ_DOMAIN
@@ -5,12 +5,12 @@
menuconfig ARCH_S3C64XX
bool "Samsung S3C64XX"
depends on ARCH_MULTI_V6
- select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
select CLKSRC_SAMSUNG_PWM
select COMMON_CLK_SAMSUNG
select GPIO_SAMSUNG if ATAGS
+ select GPIOLIB
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_TCM
@@ -11,10 +11,10 @@ config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
depends on ARCH_MULTI_V7
select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_REQUIRE_GPIOLIB
select ARM_VIC
select CLKSRC_SAMSUNG_PWM
select COMMON_CLK_SAMSUNG
+ select GPIOLIB
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
@@ -44,7 +44,7 @@ menuconfig ARCH_RENESAS
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select NO_IOPORT_MAP
select PINCTRL
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select ZONE_DMA if ARM_LPAE
if ARCH_RENESAS
@@ -5,9 +5,9 @@
menuconfig PLAT_SPEAR
bool "ST SPEAr Family"
depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
- select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select CLKSRC_MMIO
+ select GPIOLIB
if PLAT_SPEAR
@@ -10,7 +10,7 @@ menuconfig ARCH_STI
select MFD_SYSCON
select ARCH_HAS_RESET_CONTROLLER
select HAVE_ARM_SCU if SMP
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
@@ -1,10 +1,10 @@
menuconfig ARCH_SUNXI
bool "Allwinner SoCs"
depends on ARCH_MULTI_V7
- select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_RESET_CONTROLLER
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
+ select GPIOLIB
select PINCTRL
select SUN4I_TIMER
select RESET_CONTROLLER
@@ -1,11 +1,11 @@
menuconfig ARCH_TEGRA
bool "NVIDIA Tegra"
depends on ARCH_MULTI_V7
- select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
select ARM_AMBA
select ARM_GIC
select CLKSRC_MMIO
+ select GPIOLIB
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select PINCTRL
@@ -1,11 +1,11 @@
menuconfig ARCH_U300
bool "ST-Ericsson U300 Series"
depends on ARCH_MULTI_V5 && MMU
- select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
select CLKSRC_MMIO
select CPU_ARM926T
+ select GPIOLIB
select HAVE_TCM
select PINCTRL
select PINCTRL_COH901
@@ -3,13 +3,13 @@ menuconfig ARCH_U8500
depends on ARCH_MULTI_V7 && MMU
select AB8500_CORE
select ABX500_CORE
- select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_GIC
select CACHE_L2X0
select CLKSRC_NOMADIK_MTU
+ select GPIOLIB
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select PINCTRL
@@ -1,13 +1,13 @@
menuconfig ARCH_VEXPRESS
bool "ARM Ltd. Versatile Express family"
depends on ARCH_MULTI_V7
- select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA
select ARM_GIC
select ARM_GLOBAL_TIMER
select ARM_TIMER_SP804
select COMMON_CLK_VERSATILE
+ select GPIOLIB
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_PATA_PLATFORM
@@ -1,6 +1,6 @@
config ARCH_VT8500
bool
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select CLKDEV_LOOKUP
select VT8500_TIMER
select PINCTRL
This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch <m@bues.ch> Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- Various arch maintainers: either ACK this and I will merge it into the GPIO tree for v4.7 anticipating no clashes, or you wait until I have the enabling patch upstream (patch 1 in this series, removing deps on ARCH_[WANTS_OPTIONAL|REQUIRES]_GPIOLIB), and you will be able to merge it to your arch trees yourselves for late v4.7 (post GPIO tree merge) or for v4.8. You can also ask me for an immutable branch if you prefer that, I will put the enabling patch on a branch and the patch for your arch on top and ask you to pull it. Select your option from the menu, silence probably means I will merge it to the GPIO tree. Unless you are X86 or ARM in which case I will be cautious. --- arch/arm/Kconfig | 34 ++++++++++++++++------------------ arch/arm/mach-at91/Kconfig | 2 +- arch/arm/mach-bcm/Kconfig | 7 +++---- arch/arm/mach-berlin/Kconfig | 2 +- arch/arm/mach-digicolor/Kconfig | 2 +- arch/arm/mach-exynos/Kconfig | 2 +- arch/arm/mach-imx/Kconfig | 2 +- arch/arm/mach-integrator/Kconfig | 4 ++-- arch/arm/mach-meson/Kconfig | 2 +- arch/arm/mach-mmp/Kconfig | 2 +- arch/arm/mach-moxart/Kconfig | 2 +- arch/arm/mach-mv78xx0/Kconfig | 2 +- arch/arm/mach-mvebu/Kconfig | 4 ++-- arch/arm/mach-mxs/Kconfig | 2 +- arch/arm/mach-nomadik/Kconfig | 2 +- arch/arm/mach-omap2/Kconfig | 2 +- arch/arm/mach-orion5x/Kconfig | 2 +- arch/arm/mach-picoxcell/Kconfig | 2 +- arch/arm/mach-prima2/Kconfig | 2 +- arch/arm/mach-rockchip/Kconfig | 2 +- arch/arm/mach-s3c24xx/Kconfig | 2 +- arch/arm/mach-s3c64xx/Kconfig | 2 +- arch/arm/mach-s5pv210/Kconfig | 2 +- arch/arm/mach-shmobile/Kconfig | 2 +- arch/arm/mach-spear/Kconfig | 2 +- arch/arm/mach-sti/Kconfig | 2 +- arch/arm/mach-sunxi/Kconfig | 2 +- arch/arm/mach-tegra/Kconfig | 2 +- arch/arm/mach-u300/Kconfig | 2 +- arch/arm/mach-ux500/Kconfig | 2 +- arch/arm/mach-vexpress/Kconfig | 2 +- arch/arm/mach-vt8500/Kconfig | 2 +- 32 files changed, 51 insertions(+), 54 deletions(-) -- 2.4.11 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html