diff mbox series

[v3,1/2] arm64: dts: mediatek: add i2c support for mt8365 SoC

Message ID 20221122-mt8365-i2c-support-v3-1-ad9bb1076d7f@baylibre.com
State Superseded
Headers show
Series Add MediaTek MT8365 I2C support | expand

Commit Message

Alexandre Mergnat March 6, 2023, 1:47 p.m. UTC 
There are four I2C master channels in MT8365 with a same HW architecture.

Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8365.dtsi | 52 ++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

Comments

AngeloGioacchino Del Regno March 7, 2023, 9:43 a.m. UTC | #1 
Il 06/03/23 14:47, Alexandre Mergnat ha scritto:
> There are four I2C master channels in MT8365 with a same HW architecture.
> 
> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8365.dtsi | 52 ++++++++++++++++++++++++++++++++
>   1 file changed, 52 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> index 15ac4c1f0966..553c7516406a 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> @@ -282,6 +282,45 @@ pwm: pwm@11006000 {
>   			clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
>   		};
>   
> +		i2c0: i2c@11007000 {
> +			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
> +			reg = <0 0x11007000 0 0xa0>, <0 0x11000080 0 0x80>;
> +			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
> +			clock-div = <1>;
> +			clocks = <&infracfg CLK_IFR_I2C0_AXI>,
> +				 <&infracfg CLK_IFR_AP_DMA>;

You can compress the clocks to one single line, reaching 91 columns, on all of the
new i2c nodes that you're introducing. Please do that.

With that done:

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Regards,
Angelo
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index 15ac4c1f0966..553c7516406a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -282,6 +282,45 @@  pwm: pwm@11006000 {
 			clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
 		};
 
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11007000 0 0xa0>, <0 0x11000080 0 0x80>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C0_AXI>,
+				 <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11008000 0 0xa0>, <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C1_AXI>,
+				 <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11009000 0 0xa0>, <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C2_AXI>,
+				 <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		spi: spi@1100a000 {
 			compatible = "mediatek,mt8365-spi", "mediatek,mt7622-spi";
 			reg = <0 0x1100a000 0 0x100>;
@@ -295,6 +334,19 @@  spi: spi@1100a000 {
 			status = "disabled";
 		};
 
+		i2c3: i2c@1100f000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C3_AXI>,
+				 <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		ssusb: usb@11201000 {
 			compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3";
 			reg = <0 0x11201000 0 0x2e00>, <0 0x11203e00 0 0x0100>;