@@ -34,14 +34,27 @@
/* Internal sampling clock frequency */
#define HW_TIMER_HZ 19200000
-#define BWMON_V4_GLOBAL_IRQ_CLEAR 0x008
-#define BWMON_V4_GLOBAL_IRQ_ENABLE 0x00c
+#define BWMON_V4_GLOBAL_IRQ_CLEAR 0x108
+#define BWMON_V4_GLOBAL_IRQ_ENABLE 0x10c
/*
* All values here and further are matching regmap fields, so without absolute
* register offsets.
*/
#define BWMON_V4_GLOBAL_IRQ_ENABLE_ENABLE BIT(0)
+/*
+ * Starting with SDM845, the BWMON4 register space has changed a bit:
+ * the global registers were jammed into the beginning of the monitor region.
+ * To keep the proper offsets, one would have to map <GLOBAL_BASE 0x200> and
+ * <GLOBAL_BASE+0x100 0x300>, which is straight up wrong.
+ * To facilitate for that, while allowing the older, arguably more proper
+ * implementations to work, offset the global registers by -0x100 to avoid
+ * having to map half of the global registers twice.
+ */
+#define BWMON_V4_845_OFFSET 0x100
+#define BWMON_V4_GLOBAL_IRQ_CLEAR_845 (BWMON_V4_GLOBAL_IRQ_CLEAR - BWMON_V4_845_OFFSET)
+#define BWMON_V4_GLOBAL_IRQ_ENABLE_845 (BWMON_V4_GLOBAL_IRQ_ENABLE - BWMON_V4_845_OFFSET)
+
#define BWMON_V4_IRQ_STATUS 0x100
#define BWMON_V4_IRQ_CLEAR 0x108
@@ -118,8 +131,10 @@
#define BWMON_NEEDS_FORCE_CLEAR BIT(1)
enum bwmon_fields {
- F_GLOBAL_IRQ_CLEAR,
- F_GLOBAL_IRQ_ENABLE,
+ /* Fields used only on >=SDM845 with BWMON_HAS_GLOBAL_IRQ */
+ F_GLB_IRQ_CLEAR,
+ F_GLB_IRQ_ENABLE,
+
F_IRQ_STATUS,
F_IRQ_CLEAR,
F_IRQ_ENABLE,
@@ -145,6 +160,13 @@ enum bwmon_fields {
F_NUM_FIELDS
};
+enum bwmon_global_fields {
+ F_GLOBAL_IRQ_CLEAR,
+ F_GLOBAL_IRQ_ENABLE,
+
+ F_NUM_GLOBAL_FIELDS
+};
+
struct icc_bwmon_data {
unsigned int sample_ms;
unsigned int count_unit_kb; /* kbytes */
@@ -157,6 +179,9 @@ struct icc_bwmon_data {
const struct regmap_config *regmap_cfg;
const struct reg_field *regmap_fields;
+
+ const struct regmap_config *global_regmap_cfg;
+ const struct reg_field *global_regmap_fields;
};
struct icc_bwmon {
@@ -166,6 +191,7 @@ struct icc_bwmon {
struct regmap *regmap;
struct regmap_field *regs[F_NUM_FIELDS];
+ struct regmap_field *global_regs[F_NUM_FIELDS];
unsigned int max_bw_kbps;
unsigned int min_bw_kbps;
@@ -175,8 +201,8 @@ struct icc_bwmon {
/* BWMON v4 */
static const struct reg_field msm8998_bwmon_reg_fields[] = {
- [F_GLOBAL_IRQ_CLEAR] = REG_FIELD(BWMON_V4_GLOBAL_IRQ_CLEAR, 0, 0),
- [F_GLOBAL_IRQ_ENABLE] = REG_FIELD(BWMON_V4_GLOBAL_IRQ_ENABLE, 0, 0),
+ [F_GLB_IRQ_CLEAR] = REG_FIELD(BWMON_V4_GLOBAL_IRQ_CLEAR_845, 0, 0),
+ [F_GLB_IRQ_ENABLE] = REG_FIELD(BWMON_V4_GLOBAL_IRQ_ENABLE_845, 0, 0),
[F_IRQ_STATUS] = REG_FIELD(BWMON_V4_IRQ_STATUS, 4, 7),
[F_IRQ_CLEAR] = REG_FIELD(BWMON_V4_IRQ_CLEAR, 4, 7),
[F_IRQ_ENABLE] = REG_FIELD(BWMON_V4_IRQ_ENABLE, 4, 7),
@@ -202,7 +228,7 @@ static const struct reg_field msm8998_bwmon_reg_fields[] = {
};
static const struct regmap_range msm8998_bwmon_reg_noread_ranges[] = {
- regmap_reg_range(BWMON_V4_GLOBAL_IRQ_CLEAR, BWMON_V4_GLOBAL_IRQ_CLEAR),
+ regmap_reg_range(BWMON_V4_GLOBAL_IRQ_CLEAR_845, BWMON_V4_GLOBAL_IRQ_CLEAR_845),
regmap_reg_range(BWMON_V4_IRQ_CLEAR, BWMON_V4_IRQ_CLEAR),
regmap_reg_range(BWMON_V4_CLEAR, BWMON_V4_CLEAR),
};
@@ -222,16 +248,34 @@ static const struct regmap_access_table msm8998_bwmon_reg_volatile_table = {
.n_yes_ranges = ARRAY_SIZE(msm8998_bwmon_reg_volatile_ranges),
};
+static const struct reg_field msm8998_bwmon_global_reg_fields[] = {
+ [F_GLOBAL_IRQ_CLEAR] = REG_FIELD(BWMON_V4_GLOBAL_IRQ_CLEAR, 0, 0),
+ [F_GLOBAL_IRQ_ENABLE] = REG_FIELD(BWMON_V4_GLOBAL_IRQ_ENABLE, 0, 0),
+};
+
+static const struct regmap_range msm8998_bwmon_global_reg_noread_ranges[] = {
+ regmap_reg_range(BWMON_V4_GLOBAL_IRQ_CLEAR, BWMON_V4_GLOBAL_IRQ_CLEAR),
+};
+
+static const struct regmap_access_table msm8998_bwmon_global_reg_read_table = {
+ .no_ranges = msm8998_bwmon_global_reg_noread_ranges,
+ .n_no_ranges = ARRAY_SIZE(msm8998_bwmon_global_reg_noread_ranges),
+};
+
/*
* Fill the cache for non-readable registers only as rest does not really
* matter and can be read from the device.
*/
static const struct reg_default msm8998_bwmon_reg_defaults[] = {
- { BWMON_V4_GLOBAL_IRQ_CLEAR, 0x0 },
+ { BWMON_V4_GLOBAL_IRQ_CLEAR_845, 0x0 },
{ BWMON_V4_IRQ_CLEAR, 0x0 },
{ BWMON_V4_CLEAR, 0x0 },
};
+static const struct reg_default msm8998_bwmon_global_reg_defaults[] = {
+ { BWMON_V4_GLOBAL_IRQ_CLEAR, 0x0 },
+};
+
static const struct regmap_config msm8998_bwmon_regmap_cfg = {
.reg_bits = 32,
.reg_stride = 4,
@@ -252,10 +296,27 @@ static const struct regmap_config msm8998_bwmon_regmap_cfg = {
.cache_type = REGCACHE_RBTREE,
};
+static const struct regmap_config msm8998_bwmon_global_regmap_cfg = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ /*
+ * No concurrent access expected - driver has one interrupt handler,
+ * regmap is not shared, no driver or user-space API.
+ */
+ .disable_locking = true,
+ .rd_table = &msm8998_bwmon_global_reg_read_table,
+ .reg_defaults = msm8998_bwmon_global_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(msm8998_bwmon_global_reg_defaults),
+ /*
+ * Cache is necessary for using regmap fields with non-readable
+ * registers.
+ */
+ .cache_type = REGCACHE_RBTREE,
+};
+
/* BWMON v5 */
static const struct reg_field sdm845_llcc_bwmon_reg_fields[] = {
- [F_GLOBAL_IRQ_CLEAR] = {},
- [F_GLOBAL_IRQ_ENABLE] = {},
[F_IRQ_STATUS] = REG_FIELD(BWMON_V5_IRQ_STATUS, 0, 3),
[F_IRQ_CLEAR] = REG_FIELD(BWMON_V5_IRQ_CLEAR, 0, 3),
[F_IRQ_ENABLE] = REG_FIELD(BWMON_V5_IRQ_ENABLE, 0, 3),
@@ -369,16 +430,21 @@ static void bwmon_clear_irq(struct icc_bwmon *bwmon)
regmap_field_force_write(bwmon->regs[F_IRQ_CLEAR], BWMON_IRQ_ENABLE_MASK);
if (bwmon->data->quirks & BWMON_NEEDS_FORCE_CLEAR)
regmap_field_force_write(bwmon->regs[F_IRQ_CLEAR], 0);
- if (bwmon->data->quirks & BWMON_HAS_GLOBAL_IRQ)
- regmap_field_force_write(bwmon->regs[F_GLOBAL_IRQ_CLEAR],
+ if (bwmon->global_regs[0])
+ regmap_field_force_write(bwmon->global_regs[F_GLOBAL_IRQ_CLEAR],
+ BWMON_V4_GLOBAL_IRQ_ENABLE_ENABLE);
+ else
+ regmap_field_force_write(bwmon->regs[F_GLB_IRQ_CLEAR],
BWMON_V4_GLOBAL_IRQ_ENABLE_ENABLE);
}
static void bwmon_disable(struct icc_bwmon *bwmon)
{
/* Disable interrupts. Strict ordering, see bwmon_clear_irq(). */
- if (bwmon->data->quirks & BWMON_HAS_GLOBAL_IRQ)
- regmap_field_write(bwmon->regs[F_GLOBAL_IRQ_ENABLE], 0x0);
+ if (bwmon->global_regs[0])
+ regmap_field_write(bwmon->global_regs[F_GLOBAL_IRQ_ENABLE], 0x0);
+ else
+ regmap_field_write(bwmon->regs[F_GLB_IRQ_ENABLE], 0x0);
regmap_field_write(bwmon->regs[F_IRQ_ENABLE], 0x0);
/*
@@ -391,9 +457,13 @@ static void bwmon_disable(struct icc_bwmon *bwmon)
static void bwmon_enable(struct icc_bwmon *bwmon, unsigned int irq_enable)
{
/* Enable interrupts */
- if (bwmon->data->quirks & BWMON_HAS_GLOBAL_IRQ)
- regmap_field_write(bwmon->regs[F_GLOBAL_IRQ_ENABLE],
- BWMON_V4_GLOBAL_IRQ_ENABLE_ENABLE);
+ if (bwmon->global_regs[0])
+ regmap_field_write(bwmon->global_regs[F_GLOBAL_IRQ_ENABLE],
+ BWMON_V4_GLOBAL_IRQ_ENABLE_ENABLE);
+ else
+ regmap_field_write(bwmon->regs[F_GLB_IRQ_ENABLE],
+ BWMON_V4_GLOBAL_IRQ_ENABLE_ENABLE);
+
regmap_field_write(bwmon->regs[F_IRQ_ENABLE], irq_enable);
/* Enable bwmon */
@@ -556,7 +626,9 @@ static int bwmon_init_regmap(struct platform_device *pdev,
struct device *dev = &pdev->dev;
void __iomem *base;
struct regmap *map;
+ int ret;
+ /* Map the monitor base */
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return dev_err_probe(dev, PTR_ERR(base),
@@ -567,12 +639,38 @@ static int bwmon_init_regmap(struct platform_device *pdev,
return dev_err_probe(dev, PTR_ERR(map),
"failed to initialize regmap\n");
+ BUILD_BUG_ON(ARRAY_SIZE(msm8998_bwmon_global_reg_fields) != F_NUM_GLOBAL_FIELDS);
BUILD_BUG_ON(ARRAY_SIZE(msm8998_bwmon_reg_fields) != F_NUM_FIELDS);
BUILD_BUG_ON(ARRAY_SIZE(sdm845_llcc_bwmon_reg_fields) != F_NUM_FIELDS);
- return devm_regmap_field_bulk_alloc(dev, map, bwmon->regs,
+ ret = devm_regmap_field_bulk_alloc(dev, map, bwmon->regs,
bwmon->data->regmap_fields,
F_NUM_FIELDS);
+ if (ret)
+ return ret;
+
+ if (bwmon->data->quirks & BWMON_HAS_GLOBAL_IRQ) {
+ /* Map the global base, if separate */
+ base = devm_platform_ioremap_resource(pdev, 1);
+
+ /* If it's not, bail out early and assume the 845 register scheme */
+ if (IS_ERR(base) && PTR_ERR(base) == -EINVAL)
+ goto exit;
+ else if (IS_ERR(base))
+ return dev_err_probe(dev, PTR_ERR(base),
+ "failed to map bwmon global registers\n");
+
+ map = devm_regmap_init_mmio(dev, base, bwmon->data->global_regmap_cfg);
+ if (IS_ERR(map))
+ return dev_err_probe(dev, PTR_ERR(map),
+ "failed to initialize global regmap\n");
+
+ ret = devm_regmap_field_bulk_alloc(dev, map, bwmon->global_regs,
+ bwmon->data->global_regmap_fields,
+ F_NUM_GLOBAL_FIELDS);
+ }
+exit:
+ return ret;
}
static int bwmon_probe(struct platform_device *pdev)
@@ -645,6 +743,8 @@ static const struct icc_bwmon_data msm8998_bwmon_data = {
.quirks = BWMON_HAS_GLOBAL_IRQ,
.regmap_fields = msm8998_bwmon_reg_fields,
.regmap_cfg = &msm8998_bwmon_regmap_cfg,
+ .global_regmap_fields = msm8998_bwmon_global_reg_fields,
+ .global_regmap_cfg = &msm8998_bwmon_global_regmap_cfg,
};
static const struct icc_bwmon_data sdm845_llcc_bwmon_data = {
The BWMON hardware has two sets of registers: one for the monitor itself and one called "global". It has what seems to be some kind of a head switch and an interrupt control register. It's usually 0x200 in size. On fairly recent SoCs (with the starting point seemingly being moving the OSM programming to the firmware) these two register sets are contiguous and overlapping, like this (on sm8450): /* notice how base.start == global_base.start+0x100 */ reg = <0x90b6400 0x300>, <0x90b6300 0x200>; reg-names = "base", "global_base"; Which led to some confusion and the assumption that since the "interesting" global registers begin right after global_base+0x100, there's no need to map two separate regions and one can simply subtract 0x100 from the offsets. This is however not the case for anything older than SDM845, as the global region can appear in seemingly random spots on the register map. Add support for it to let bwmon function on older SoCs like MSM8998 and allow operation with just one set of registers for newer platforms. Fixes: b9c2ae6cac40 ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- drivers/soc/qcom/icc-bwmon.c | 136 +++++++++++++++++++++++++++++++++++++------ 1 file changed, 118 insertions(+), 18 deletions(-)