diff mbox

[5/7] KVM: arm/arm64: Remove the IRQ field from struct irq_phys_map

Message ID 1460729047-6346-6-git-send-email-andre.przywara@arm.com
State Superseded
Headers show

Commit Message

Andre Przywara April 15, 2016, 2:04 p.m. UTC
From: Christoffer Dall <christoffer.dall@linaro.org>


The communication of a Linux IRQ number from outside the VGIC to the
vgic was a leftover from the day when the vgic code cared about how a
particular device injects virtual interrupts mapped to a physical
interrupt.

We can safely remove this notion, leaving all physical IRQ handling to
be done in the device driver (the arch timer in this case), which makes
room for a saner API for the new VGIC.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

---
 include/kvm/arm_vgic.h    |  3 +--
 virt/kvm/arm/arch_timer.c | 22 ++++++++++++++++++++--
 virt/kvm/arm/vgic.c       | 20 ++------------------
 3 files changed, 23 insertions(+), 22 deletions(-)

-- 
2.7.3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Comments

Auger Eric April 21, 2016, 5:41 p.m. UTC | #1
Hi Andre,
On 04/15/2016 04:04 PM, Andre Przywara wrote:
> From: Christoffer Dall <christoffer.dall@linaro.org>

> 

> The communication of a Linux IRQ number from outside the VGIC to the

> vgic was a leftover from the day when the vgic code cared about how a

> particular device injects virtual interrupts mapped to a physical

> interrupt.

> 

> We can safely remove this notion, leaving all physical IRQ handling to

> be done in the device driver (the arch timer in this case), which makes

> room for a saner API for the new VGIC.

> 

> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

> ---

>  include/kvm/arm_vgic.h    |  3 +--

>  virt/kvm/arm/arch_timer.c | 22 ++++++++++++++++++++--

>  virt/kvm/arm/vgic.c       | 20 ++------------------

>  3 files changed, 23 insertions(+), 22 deletions(-)

> 

> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h

> index 43eeb18..49c559e 100644

> --- a/include/kvm/arm_vgic.h

> +++ b/include/kvm/arm_vgic.h

> @@ -157,7 +157,6 @@ struct vgic_io_device {

>  struct irq_phys_map {

>  	u32			virt_irq;

>  	u32			phys_irq;

> -	u32			irq;

>  };

>  

>  struct irq_phys_map_entry {

> @@ -345,7 +344,7 @@ int kvm_vgic_inject_mapped_irq(struct kvm *kvm, int cpuid,

>  void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg);

>  int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu);

>  struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu,

> -					   int virt_irq, int irq);

> +					   int virt_irq, int phys_irq);

>  int kvm_vgic_unmap_phys_irq(struct kvm_vcpu *vcpu, unsigned int virt_irq);

>  bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, unsigned int virt_irq);

>  

> diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c

> index b4d96b1..cfdf88f 100644

> --- a/virt/kvm/arm/arch_timer.c

> +++ b/virt/kvm/arm/arch_timer.c

> @@ -274,7 +274,7 @@ void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu)

>  	if (timer->active_cleared_last && !phys_active)

>  		return;

>  

> -	ret = irq_set_irqchip_state(timer->map->irq,

> +	ret = irq_set_irqchip_state(host_vtimer_irq,

>  				    IRQCHIP_STATE_ACTIVE,

>  				    phys_active);

>  	WARN_ON(ret);

> @@ -307,6 +307,9 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,

>  {

>  	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;

>  	struct irq_phys_map *map;

> +	struct irq_desc *desc;

> +	struct irq_data *data;

> +	int phys_irq;

>  

>  	/*

>  	 * The vcpu timer irq number cannot be determined in

> @@ -326,10 +329,25 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,

>  	kvm_timer_update_state(vcpu);

>  

>  	/*

> +	 * Find the physical IRQ number corresponding to the host_vtimer_irq

> +	 */

> +	desc = irq_to_desc(host_vtimer_irq);

> +	if (!desc) {

can this really happen?
> +		kvm_err("%s: no interrupt descriptor\n", __func__);

> +		return -EINVAL;

> +	}

> +

> +	data = irq_desc_get_irq_data(desc);

> +	while (data->parent_data)

> +		data = data->parent_data;

> +

> +	phys_irq = data->hwirq;

> +

> +	/*

>  	 * Tell the VGIC that the virtual interrupt is tied to a

>  	 * physical interrupt. We do that once per VCPU.

>  	 */

> -	map = kvm_vgic_map_phys_irq(vcpu, irq->irq, host_vtimer_irq);

> +	map = kvm_vgic_map_phys_irq(vcpu, irq->irq, phys_irq);

>  	if (WARN_ON(IS_ERR(map)))

>  		return PTR_ERR(map);

>  

> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c

> index 2d7ae35..ac5838b 100644

> --- a/virt/kvm/arm/vgic.c

> +++ b/virt/kvm/arm/vgic.c

> @@ -1723,27 +1723,13 @@ static struct list_head *vgic_get_irq_phys_map_list(struct kvm_vcpu *vcpu,

>   * Returns a valid pointer on success, and an error pointer otherwise

>   */

the doc comment must be updated
 * @irq: The Linux IRQ number

Besides

Reviewed-by: Eric Auger <eric.auger@linaro.org>


Cheers

Eric

>  struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu,

> -					   int virt_irq, int irq)

> +					   int virt_irq, int phys_irq)

>  {

>  	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;

>  	struct list_head *root = vgic_get_irq_phys_map_list(vcpu, virt_irq);

>  	struct irq_phys_map *map;

>  	struct irq_phys_map_entry *entry;

> -	struct irq_desc *desc;

> -	struct irq_data *data;

> -	int phys_irq;

>  

> -	desc = irq_to_desc(irq);

> -	if (!desc) {

> -		kvm_err("%s: no interrupt descriptor\n", __func__);

> -		return ERR_PTR(-EINVAL);

> -	}

> -

> -	data = irq_desc_get_irq_data(desc);

> -	while (data->parent_data)

> -		data = data->parent_data;

> -

> -	phys_irq = data->hwirq;

>  

>  	/* Create a new mapping */

>  	entry = kzalloc(sizeof(*entry), GFP_KERNEL);

> @@ -1756,8 +1742,7 @@ struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu,

>  	map = vgic_irq_map_search(vcpu, virt_irq);

>  	if (map) {

>  		/* Make sure this mapping matches */

> -		if (map->phys_irq != phys_irq	||

> -		    map->irq      != irq)

> +		if (map->phys_irq != phys_irq)

>  			map = ERR_PTR(-EINVAL);

>  

>  		/* Found an existing, valid mapping */

> @@ -1767,7 +1752,6 @@ struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu,

>  	map           = &entry->map;

>  	map->virt_irq = virt_irq;

>  	map->phys_irq = phys_irq;

> -	map->irq      = irq;

>  

>  	list_add_tail_rcu(&entry->entry, root);

>  

> 



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Christoffer Dall April 21, 2016, 6:32 p.m. UTC | #2
On Thu, Apr 21, 2016 at 07:41:01PM +0200, Eric Auger wrote:
> Hi Andre,

> On 04/15/2016 04:04 PM, Andre Przywara wrote:

> > From: Christoffer Dall <christoffer.dall@linaro.org>

> > 

> > The communication of a Linux IRQ number from outside the VGIC to the

> > vgic was a leftover from the day when the vgic code cared about how a

> > particular device injects virtual interrupts mapped to a physical

> > interrupt.

> > 

> > We can safely remove this notion, leaving all physical IRQ handling to

> > be done in the device driver (the arch timer in this case), which makes

> > room for a saner API for the new VGIC.

> > 

> > Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

> > Signed-off-by: Andre Przywara <andre.przywara@arm.com>

> > ---

> >  include/kvm/arm_vgic.h    |  3 +--

> >  virt/kvm/arm/arch_timer.c | 22 ++++++++++++++++++++--

> >  virt/kvm/arm/vgic.c       | 20 ++------------------

> >  3 files changed, 23 insertions(+), 22 deletions(-)

> > 

> > diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h

> > index 43eeb18..49c559e 100644

> > --- a/include/kvm/arm_vgic.h

> > +++ b/include/kvm/arm_vgic.h

> > @@ -157,7 +157,6 @@ struct vgic_io_device {

> >  struct irq_phys_map {

> >  	u32			virt_irq;

> >  	u32			phys_irq;

> > -	u32			irq;

> >  };

> >  

> >  struct irq_phys_map_entry {

> > @@ -345,7 +344,7 @@ int kvm_vgic_inject_mapped_irq(struct kvm *kvm, int cpuid,

> >  void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg);

> >  int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu);

> >  struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu,

> > -					   int virt_irq, int irq);

> > +					   int virt_irq, int phys_irq);

> >  int kvm_vgic_unmap_phys_irq(struct kvm_vcpu *vcpu, unsigned int virt_irq);

> >  bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, unsigned int virt_irq);

> >  

> > diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c

> > index b4d96b1..cfdf88f 100644

> > --- a/virt/kvm/arm/arch_timer.c

> > +++ b/virt/kvm/arm/arch_timer.c

> > @@ -274,7 +274,7 @@ void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu)

> >  	if (timer->active_cleared_last && !phys_active)

> >  		return;

> >  

> > -	ret = irq_set_irqchip_state(timer->map->irq,

> > +	ret = irq_set_irqchip_state(host_vtimer_irq,

> >  				    IRQCHIP_STATE_ACTIVE,

> >  				    phys_active);

> >  	WARN_ON(ret);

> > @@ -307,6 +307,9 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,

> >  {

> >  	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;

> >  	struct irq_phys_map *map;

> > +	struct irq_desc *desc;

> > +	struct irq_data *data;

> > +	int phys_irq;

> >  

> >  	/*

> >  	 * The vcpu timer irq number cannot be determined in

> > @@ -326,10 +329,25 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,

> >  	kvm_timer_update_state(vcpu);

> >  

> >  	/*

> > +	 * Find the physical IRQ number corresponding to the host_vtimer_irq

> > +	 */

> > +	desc = irq_to_desc(host_vtimer_irq);

> > +	if (!desc) {

> can this really happen?


this is just moving the logic.  We had this check before, so I assume
so...

> > +		kvm_err("%s: no interrupt descriptor\n", __func__);

> > +		return -EINVAL;

> > +	}

> > +

> > +	data = irq_desc_get_irq_data(desc);

> > +	while (data->parent_data)

> > +		data = data->parent_data;

> > +

> > +	phys_irq = data->hwirq;

> > +

> > +	/*

> >  	 * Tell the VGIC that the virtual interrupt is tied to a

> >  	 * physical interrupt. We do that once per VCPU.

> >  	 */

> > -	map = kvm_vgic_map_phys_irq(vcpu, irq->irq, host_vtimer_irq);

> > +	map = kvm_vgic_map_phys_irq(vcpu, irq->irq, phys_irq);

> >  	if (WARN_ON(IS_ERR(map)))

> >  		return PTR_ERR(map);

> >  

> > diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c

> > index 2d7ae35..ac5838b 100644

> > --- a/virt/kvm/arm/vgic.c

> > +++ b/virt/kvm/arm/vgic.c

> > @@ -1723,27 +1723,13 @@ static struct list_head *vgic_get_irq_phys_map_list(struct kvm_vcpu *vcpu,

> >   * Returns a valid pointer on success, and an error pointer otherwise

> >   */

> the doc comment must be updated

>  * @irq: The Linux IRQ number

> 

> Besides

> 

> Reviewed-by: Eric Auger <eric.auger@linaro.org>

> 

Thanks!

Andre, let me know if you need me to provide an updated patch or if you
can just tweak that comment.

-Christoffer

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox

Patch

diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 43eeb18..49c559e 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -157,7 +157,6 @@  struct vgic_io_device {
 struct irq_phys_map {
 	u32			virt_irq;
 	u32			phys_irq;
-	u32			irq;
 };
 
 struct irq_phys_map_entry {
@@ -345,7 +344,7 @@  int kvm_vgic_inject_mapped_irq(struct kvm *kvm, int cpuid,
 void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg);
 int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu);
 struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu,
-					   int virt_irq, int irq);
+					   int virt_irq, int phys_irq);
 int kvm_vgic_unmap_phys_irq(struct kvm_vcpu *vcpu, unsigned int virt_irq);
 bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, unsigned int virt_irq);
 
diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
index b4d96b1..cfdf88f 100644
--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -274,7 +274,7 @@  void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu)
 	if (timer->active_cleared_last && !phys_active)
 		return;
 
-	ret = irq_set_irqchip_state(timer->map->irq,
+	ret = irq_set_irqchip_state(host_vtimer_irq,
 				    IRQCHIP_STATE_ACTIVE,
 				    phys_active);
 	WARN_ON(ret);
@@ -307,6 +307,9 @@  int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
 {
 	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
 	struct irq_phys_map *map;
+	struct irq_desc *desc;
+	struct irq_data *data;
+	int phys_irq;
 
 	/*
 	 * The vcpu timer irq number cannot be determined in
@@ -326,10 +329,25 @@  int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
 	kvm_timer_update_state(vcpu);
 
 	/*
+	 * Find the physical IRQ number corresponding to the host_vtimer_irq
+	 */
+	desc = irq_to_desc(host_vtimer_irq);
+	if (!desc) {
+		kvm_err("%s: no interrupt descriptor\n", __func__);
+		return -EINVAL;
+	}
+
+	data = irq_desc_get_irq_data(desc);
+	while (data->parent_data)
+		data = data->parent_data;
+
+	phys_irq = data->hwirq;
+
+	/*
 	 * Tell the VGIC that the virtual interrupt is tied to a
 	 * physical interrupt. We do that once per VCPU.
 	 */
-	map = kvm_vgic_map_phys_irq(vcpu, irq->irq, host_vtimer_irq);
+	map = kvm_vgic_map_phys_irq(vcpu, irq->irq, phys_irq);
 	if (WARN_ON(IS_ERR(map)))
 		return PTR_ERR(map);
 
diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index 2d7ae35..ac5838b 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -1723,27 +1723,13 @@  static struct list_head *vgic_get_irq_phys_map_list(struct kvm_vcpu *vcpu,
  * Returns a valid pointer on success, and an error pointer otherwise
  */
 struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu,
-					   int virt_irq, int irq)
+					   int virt_irq, int phys_irq)
 {
 	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
 	struct list_head *root = vgic_get_irq_phys_map_list(vcpu, virt_irq);
 	struct irq_phys_map *map;
 	struct irq_phys_map_entry *entry;
-	struct irq_desc *desc;
-	struct irq_data *data;
-	int phys_irq;
 
-	desc = irq_to_desc(irq);
-	if (!desc) {
-		kvm_err("%s: no interrupt descriptor\n", __func__);
-		return ERR_PTR(-EINVAL);
-	}
-
-	data = irq_desc_get_irq_data(desc);
-	while (data->parent_data)
-		data = data->parent_data;
-
-	phys_irq = data->hwirq;
 
 	/* Create a new mapping */
 	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
@@ -1756,8 +1742,7 @@  struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu,
 	map = vgic_irq_map_search(vcpu, virt_irq);
 	if (map) {
 		/* Make sure this mapping matches */
-		if (map->phys_irq != phys_irq	||
-		    map->irq      != irq)
+		if (map->phys_irq != phys_irq)
 			map = ERR_PTR(-EINVAL);
 
 		/* Found an existing, valid mapping */
@@ -1767,7 +1752,6 @@  struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu,
 	map           = &entry->map;
 	map->virt_irq = virt_irq;
 	map->phys_irq = phys_irq;
-	map->irq      = irq;
 
 	list_add_tail_rcu(&entry->entry, root);