| Message ID | 20230302134922.1120217-2-linux@rasmusvillemoes.dk |
|---|---|
| State | Accepted |
| Commit | 954ea91fb68b771dba6d87cfa61b68e09cc2497f |
| Headers | show |
| Series | [1/2] dt-bindings: iio: ad74413r: allow setting sink current for digital input | expand |
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml index 9eb3ecc8bbc8..fcae300182f7 100644 --- a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml @@ -101,6 +101,16 @@ patternProperties: When not configured as a comparator, the GPO will be treated as an output-only GPIO. + drive-strength-microamp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + For channels configured as digital input, this configures the sink + current. + minimum: 0 + maximum: 1800 + default: 0 + multipleOf: 120 + required: - reg
Depending on the actual hardware wired up to a digital input channel, it may be necessary to configure the ad74413r to sink a small current. For example, in the case of a simple mechanical switch, the charge on the external 68 nF capacitor (cf. the data sheet's Figure 34) will keep the channel as reading high even after the switch is turned off again. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> --- .../devicetree/bindings/iio/addac/adi,ad74413r.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+)