@@ -104,6 +104,108 @@ ppvar_sys: regulator-ppvar-sys {
regulator-boot-on;
};
+ tboard_thermistor1: thermal-sensor-t1 {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&auxadc 0>;
+ io-channel-names = "sensor-channel";
+ temperature-lookup-table = < (-5000) 4241
+ 0 4063
+ 5000 3856
+ 10000 3621
+ 15000 3364
+ 20000 3091
+ 25000 2810
+ 30000 2526
+ 35000 2247
+ 40000 1982
+ 45000 1734
+ 50000 1507
+ 55000 1305
+ 60000 1122
+ 65000 964
+ 70000 827
+ 75000 710
+ 80000 606
+ 85000 519
+ 90000 445
+ 95000 382
+ 100000 330
+ 105000 284
+ 110000 245
+ 115000 213
+ 120000 183
+ 125000 161>;
+ };
+
+ tboard_thermistor2: thermal-sensor-t2 {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&auxadc 0>;
+ io-channel-names = "sensor-channel";
+ temperature-lookup-table = < (-5000) 4241
+ 0 4063
+ 5000 3856
+ 10000 3621
+ 15000 3364
+ 20000 3091
+ 25000 2810
+ 30000 2526
+ 35000 2247
+ 40000 1982
+ 45000 1734
+ 50000 1507
+ 55000 1305
+ 60000 1122
+ 65000 964
+ 70000 827
+ 75000 710
+ 80000 606
+ 85000 519
+ 90000 445
+ 95000 382
+ 100000 330
+ 105000 284
+ 110000 245
+ 115000 213
+ 120000 183
+ 125000 161>;
+ };
+
+ tboard_thermistor3: thermal-sensor-t3 {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&auxadc 0>;
+ io-channel-names = "sensor-channel";
+ temperature-lookup-table = < (-5000) 4241
+ 0 4063
+ 5000 3856
+ 10000 3621
+ 15000 3364
+ 20000 3091
+ 25000 2810
+ 30000 2526
+ 35000 2247
+ 40000 1982
+ 45000 1734
+ 50000 1507
+ 55000 1305
+ 60000 1122
+ 65000 964
+ 70000 827
+ 75000 710
+ 80000 606
+ 85000 519
+ 90000 445
+ 95000 382
+ 100000 330
+ 105000 284
+ 110000 245
+ 115000 213
+ 120000 183
+ 125000 161>;
+ };
+
usb_vbus: regulator-5v0-usb-vbus {
compatible = "regulator-fixed";
regulator-name = "usb-vbus";
@@ -243,6 +345,10 @@ &gpu {
mali-supply = <&mt6315_7_vbuck1>;
};
+&auxadc {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
@@ -1074,6 +1180,24 @@ mt6315_7_vbuck1: vbuck1 {
};
};
+&thermal_zones {
+ ap_ntc1 {
+ polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&tboard_thermistor1>;
+ };
+ ap_ntc2 {
+ polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&tboard_thermistor2>;
+ };
+ ap_ntc3 {
+ polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&tboard_thermistor3>;
+ };
+};
+
&u3phy0 {
status = "okay";
};
This platform has three auxiliary NTC thermistors, connected to the SoC's ADC pins. Enable the auxadc in order to be able to read the ADC values, add a generic-adc-thermal LUT for each and finally assign them to the SoC's thermal zones. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- .../boot/dts/mediatek/mt8195-cherry.dtsi | 124 ++++++++++++++++++ 1 file changed, 124 insertions(+)