| Message ID | 1676986616-21378-2-git-send-email-quic_mojha@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2,1/2] dt-bindings: sram: qcom,imem: document sm8450 | expand |
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 1a744a3..2a4f4ac 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -3814,6 +3814,20 @@ }; }; + sram@146aa000 { + compatible = "qcom,sm8450-imem", "syscon", "simple-mfd"; + reg = <0 0x146aa000 0 0x1000>; + ranges = <0 0 0x146aa000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + timer@17420000 { compatible = "arm,armv7-timer-mem"; #address-cells = <1>;
Add a simple-mfd representing IMEM on SM8450 and define the PIL relocation info region, so that post mortem tools will be able to locate the loaded remoteprocs. Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> --- Changes in v2: - put ranges after regs and corrected the sram node position. arch/arm64/boot/dts/qcom/sm8450.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)