diff mbox series

[v9,09/11] dt-bindings: PCI: qcom: Add SM8550 compatible

Message ID 20230208180020.2761766-10-abel.vesa@linaro.org
State Superseded
Headers show
Series sm8550: Add PCIe HC and PHY support | expand

Commit Message

Abel Vesa Feb. 8, 2023, 6 p.m. UTC 
Add the SM8550 platform to the binding.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---

The v8 of this patch is:
https://lore.kernel.org/all/20230206212619.3218741-10-abel.vesa@linaro.org/

Changes since v8:
 * none

Changes since v7:
 * dropped the enable-gpios property as it is not used
 * added Johan's R-b tag

Changes since v6:
 * none

Changes since v5:
 * added Krzysztof's R-b tag

Changes since v4:
 * dropped _serdes infix from ln_shrd table name and from every ln_shrd
   variable name
 * added hyphen between "no CSR" in both places
 * dropped has_ln_shrd_serdes_tbl
 * reordered qmp_pcie_offsets_v6_20 by struct members
 * added rollback for no-CSR reset in qmp_pcie_init fail path
 * moved ln_shrd offset calculation after port_b
 * dropped the minItems for interconnects
 * made iommu related properties global
 * renamed noc_aggr_4 back to noc_aggr

Changes since v3:
 * renamed noc_aggr to noc_aggr_4, as found in the driver

Changes since v2:
 * dropped the pipe from clock-names
 * removed the pcie instance number from aggre clock-names comment
 * renamed aggre clock-names to noc_aggr
 * dropped the _pcie infix from cnoc_pcie_sf_axi
 * renamed pcie_1_link_down_reset to simply link_down
 * added enable-gpios back, since pcie1 node will use it

Changes since v1:
 * Switched to single compatible for both PCIes (qcom,pcie-sm8550)
 * dropped enable-gpios property
 * dropped interconnects related properties, the power-domains
 * properties
   and resets related properties the sm8550 specific allOf:if:then
 * dropped pipe_mux, phy_pipe and ref clocks from the sm8550 specific
   allOf:if:then clock-names array and decreased the minItems and
   maxItems for clocks property accordingly
 * added "minItems: 1" to interconnects, since sm8550 pcie uses just one,
   same for interconnect-names

 .../devicetree/bindings/pci/qcom,pcie.yaml    | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index 872817d6d2bd..eb7f5a9aef2c 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -38,6 +38,7 @@  properties:
           - qcom,pcie-sm8350
           - qcom,pcie-sm8450-pcie0
           - qcom,pcie-sm8450-pcie1
+          - qcom,pcie-sm8550
       - items:
           - const: qcom,pcie-msm8996
           - const: qcom,pcie-msm8998
@@ -58,6 +59,12 @@  properties:
     minItems: 1
     maxItems: 8
 
+  iommus:
+    maxItems: 1
+
+  iommu-map:
+    maxItems: 2
+
   # Common definitions for clocks, clock-names and reset.
   # Platform constraints are described later.
   clocks:
@@ -205,6 +212,7 @@  allOf:
               - qcom,pcie-sm8350
               - qcom,pcie-sm8450-pcie0
               - qcom,pcie-sm8450-pcie1
+              - qcom,pcie-sm8550
     then:
       properties:
         reg:
@@ -639,6 +647,37 @@  allOf:
           items:
             - const: pci # PCIe core reset
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8550
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 8
+        clock-names:
+          minItems: 7
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: noc_aggr # Aggre NoC PCIe AXI clock
+            - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+        resets:
+          minItems: 1
+          maxItems: 2
+        reset-names:
+          minItems: 1
+          items:
+            - const: pci # PCIe core reset
+            - const: link_down # PCIe link down reset
+
   - if:
       properties:
         compatible:
@@ -724,6 +763,7 @@  allOf:
               - qcom,pcie-sm8350
               - qcom,pcie-sm8450-pcie0
               - qcom,pcie-sm8450-pcie1
+              - qcom,pcie-sm8550
     then:
       oneOf:
         - properties: