[1/2] dt-bindings: arm: sti: addition of STi platform syscon

Addition of the various STi platform syscon node description.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 .../bindings/arm/sti/st,sti-syscon.yaml       | 46 +++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/sti/st,sti-syscon.yaml

Thank you for your patch. There is something to discuss/improve. Few nits.

On 11/02/2023 22:04, Alain Volmat wrote:
> Addition of the various STi platform syscon node description.

Use imperative.
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95

> 
> Signed-off-by: Alain Volmat <avolmat@me.com>
> ---
>  .../bindings/arm/sti/st,sti-syscon.yaml       | 46 +++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/sti/st,sti-syscon.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/sti/st,sti-syscon.yaml b/Documentation/devicetree/bindings/arm/sti/st,sti-syscon.yaml
> new file mode 100644
> index 000000000000..e4bbc90694b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/sti/st,sti-syscon.yaml
> @@ -0,0 +1,46 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/sti/st,sti-syscon.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STi platform sysconfig entries


Drop "entries", does not look related to hardware.

> +
> +maintainers:
> +  - Patrice Chotard <patrice.chotard@foss.st.com>
> +
> +description: |
> +  Binding for the various sysconfig nodes used within the STi
> +  platform device-tree to point to some common configuration
> +  registers used by other nodes.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - st,stih407-sbc-syscfg
> +          - st,stih407-front-syscfg
> +          - st,stih407-rear-syscfg
> +          - st,stih407-flash-syscfg
> +          - st,stih407-sbc-reg-syscfg
> +          - st,stih407-core-syscfg
> +          - st,stih407-lpm-syscfg

How about putting them in some order?

> +      - const: syscon
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    syscfg_sbc: sbc-syscfg@9620000 {

Generic node names, thus usually syscon or system-controller
> +...

Best regards,
Krzysztof

On 11/02/2023 22:04, Alain Volmat wrote:
> Addition of the various STi platform syscon node description.
> 
> Signed-off-by: Alain Volmat <avolmat@me.com>
> ---
>  .../bindings/arm/sti/st,sti-syscon.yaml       | 46 +++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/sti/st,sti-syscon.yaml

Ah, and one more - incorrect directory. This should be in soc, not arm.

Best regards,
Krzysztof

Thanks for the review.

On Sun, Feb 12, 2023 at 05:00:24PM +0100, Krzysztof Kozlowski wrote:
> Thank you for your patch. There is something to discuss/improve. Few nits.
> 
> On 11/02/2023 22:04, Alain Volmat wrote:
> > Addition of the various STi platform syscon node description.
> 
> Use imperative.
> https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
> 
> > 
> > Signed-off-by: Alain Volmat <avolmat@me.com>
> > ---
> >  .../bindings/arm/sti/st,sti-syscon.yaml       | 46 +++++++++++++++++++
> >  1 file changed, 46 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/arm/sti/st,sti-syscon.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/arm/sti/st,sti-syscon.yaml b/Documentation/devicetree/bindings/arm/sti/st,sti-syscon.yaml
> > new file mode 100644
> > index 000000000000..e4bbc90694b3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/sti/st,sti-syscon.yaml
> > @@ -0,0 +1,46 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/arm/sti/st,sti-syscon.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: STMicroelectronics STi platform sysconfig entries
> 
> 
> Drop "entries", does not look related to hardware.
> 
> > +
> > +maintainers:
> > +  - Patrice Chotard <patrice.chotard@foss.st.com>
> > +
> > +description: |
> > +  Binding for the various sysconfig nodes used within the STi
> > +  platform device-tree to point to some common configuration
> > +  registers used by other nodes.
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - st,stih407-sbc-syscfg
> > +          - st,stih407-front-syscfg
> > +          - st,stih407-rear-syscfg
> > +          - st,stih407-flash-syscfg
> > +          - st,stih407-sbc-reg-syscfg
> > +          - st,stih407-core-syscfg
> > +          - st,stih407-lpm-syscfg
> 
> How about putting them in some order?

Ok, changed to alphabet order

> 
> > +      - const: syscon
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    syscfg_sbc: sbc-syscfg@9620000 {
> 
> Generic node names, thus usually syscon or system-controller

Ok, changed to syscfg_sbc: syscon@9620000

I also move the file within bindings/soc/sti as mentioned in your other
reply.

> > +...
> 
> Best regards,
> Krzysztof
>

Thanks for the review

On Sun, Feb 12, 2023 at 05:02:17PM +0100, Krzysztof Kozlowski wrote:
> On 11/02/2023 22:04, Alain Volmat wrote:
> > Add bindings for STi platform boards and remove stih415/stih416 items.
> > This commit also moves the sti.yaml binding file within the arm/sti/
> > folder instead of arm/
> > 
> > Signed-off-by: Alain Volmat <avolmat@me.com>
> > ---
> >  .../devicetree/bindings/arm/sti.yaml          | 26 ---------------
> >  .../devicetree/bindings/arm/sti/sti.yaml      | 33 +++++++++++++++++++
> >  2 files changed, 33 insertions(+), 26 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/arm/sti.yaml
> >  create mode 100644 Documentation/devicetree/bindings/arm/sti/sti.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/arm/sti.yaml b/Documentation/devicetree/bindings/arm/sti.yaml
> > deleted file mode 100644
> > index 3ca054c64377..000000000000
> > --- a/Documentation/devicetree/bindings/arm/sti.yaml
> > +++ /dev/null
> > @@ -1,26 +0,0 @@
> > -# SPDX-License-Identifier: GPL-2.0
> > -%YAML 1.2
> > ----
> > -$id: http://devicetree.org/schemas/arm/sti.yaml#
> > -$schema: http://devicetree.org/meta-schemas/core.yaml#
> > -
> > -title: ST STi Platforms
> > -
> > -maintainers:
> > -  - Patrice Chotard <patrice.chotard@foss.st.com>
> > -
> > -properties:
> > -  $nodename:
> > -    const: '/'
> > -  compatible:
> > -    items:
> > -      - enum:
> > -          - st,stih415
> > -          - st,stih416
> > -          - st,stih407
> > -          - st,stih410
> > -          - st,stih418
> > -
> > -additionalProperties: true
> > -
> > -...
> > diff --git a/Documentation/devicetree/bindings/arm/sti/sti.yaml b/Documentation/devicetree/bindings/arm/sti/sti.yaml
> > new file mode 100644
> > index 000000000000..aefa1919207c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/sti/sti.yaml
> > @@ -0,0 +1,33 @@
> > +# SPDX-License-Identifier: GPL-2.0
> 
> Dual-license. I don't think there is anything from old binding being
> copied here (you can as well start from scratch from other binding and
> result will be the same).

Ok

I understand, based on your review of the other patch in the serie that
I should put this sti.yaml within bindings/soc/sti right ?

Moreover, I made a mistake and removed st,stih415 and st,stih416 in
this patch while I already posted the patch in the STiH415/STiH416
removal serie (https://lore.kernel.org/all/20230209091659.1409-6-avolmat@me.com/).
I propose to get rid of the patch in the other serie and do the removal
within this patch since it also moves the file.

> 
> Best regards,
> Krzysztof
>