| Message ID | 20230210134917.2909314-3-yoshihiro.shimoda.uh@renesas.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | None | expand |
On Fri, Feb 10, 2023 at 10:49:11PM +0900, Yoshihiro Shimoda wrote: > Document bindings for Renesas R-Car Gen4 and R-Car S4-8 (R8A779F0) > PCIe endpoint module. > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > Reviewed-by: Rob Herring <robh@kernel.org> > --- > .../bindings/pci/rcar-gen4-pci-ep.yaml | 90 +++++++++++++++++++ > 1 file changed, 90 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml > > diff --git a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml > new file mode 100644 > index 000000000000..4b10d67e4336 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml > @@ -0,0 +1,90 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2022 Renesas Electronics Corp. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/rcar-gen4-pci-ep.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Renesas R-Car Gen4 PCIe Endpoint > + > +maintainers: > + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > + > +allOf: > + - $ref: snps,dw-pcie-ep.yaml# > + > +properties: > + compatible: > + items: > + - const: renesas,r8a779f0-pcie-ep # R-Car S4-8 > + - const: renesas,rcar-gen4-pcie-ep # R-Car Gen4 > + > + reg: > + maxItems: 4 > + > + reg-names: > + items: > + - const: dbi > + - const: atu > + - const: appl Please, use "elbi" or "app" instead. No need in using the vendor-specific names if there is the generic ones. (* @Rob, that's why I was insisting in failing the DT-bindings evaluation for such cases...) See Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml:98 > + - const: addr_space > + > + interrupts: > + maxItems: 3 > + > + interrupt-names: > + items: > + - const: dma Are you sure there is a single IRQ line for all eDMA channels? Judging by the DW PCIe HW manual the eDMA events are signaled by the wires: edma_int[((CC_NUM_DMA_RD_CHAN+CC_NUM_DMA_WR_CHAN)-1):0]. If you have a single signal then they must have been combined on the way to the GIC though... > + - const: sft_ce > + - const: app > + > + power-domains: > + maxItems: 1 > + > + resets: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + max-link-speed: true This prop is determined by the CX_MAX_PCIE_SPEED IP-core synthesize parameter. > + > + num-lanes: true This is determined by the CX_NL IP-core synthesize parameter. Thus you can provide at least the 'maximum' constraint for the properties above. > + > +required: > + - compatible > + - reg > + - reg-names > + - interrupts > + - resets > + - power-domains > + - clocks > + > +additionalProperties: false Are you sure that none of the next properties will be ever used in the R-Car PCIe End-point DT-nodes? max-functions max-virtual-functions phys phy-names reset-gpios snps,enable-cdm-check dma-coherent * etc I am pretty much sure that the reset-gpios (platform-specific), max-{virtual-}functions (determined by the CX_NFUNC IP-core synthesize parameter), phys/phy-names (you had a PHYs CSR space in the DT-bindings example) and dma-coherent properties are relevant for your device. At the very least the 'max-functions' prop constraint could be explicitly added to your DT-bindings file. You must be aware of how many functions the R-Car PCIe EP support, right? The rest of the properties could be implicitly evaluated by replacing the "additionalProperties: false" flag with the "unevaluatedProperties: false" statement. -Serge(y) > + > +examples: > + - | > + #include <dt-bindings/clock/r8a779f0-cpg-mssr.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/power/r8a779f0-sysc.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + pcie0_ep: pcie-ep@e65d0000 { > + compatible = "renesas,r8a779f0-pcie-ep", "renesas,rcar-gen4-pcie-ep"; > + reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d1000 0 0x1000>, > + <0 0xe65d3000 0 0x2000>, <0 0xfe000000 0 0x400000>; > + reg-names = "dbi", "atu", "appl", "addr_space"; > + interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "dma", "sft_ce", "app"; > + clocks = <&cpg CPG_MOD 624>; > + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; > + resets = <&cpg 624>; > + num-lanes = <2>; > + max-link-speed = <2>; > + }; > + }; > -- > 2.25.1 > >
Hi Serge, > From: Serge Semin, Sent: Monday, February 13, 2023 6:11 AM > > On Fri, Feb 10, 2023 at 10:49:11PM +0900, Yoshihiro Shimoda wrote: > > Document bindings for Renesas R-Car Gen4 and R-Car S4-8 (R8A779F0) > > PCIe endpoint module. > > > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > > Reviewed-by: Rob Herring <robh@kernel.org> > > --- > > .../bindings/pci/rcar-gen4-pci-ep.yaml | 90 +++++++++++++++++++ > > 1 file changed, 90 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml > > > > diff --git a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml > b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml > > new file mode 100644 > > index 000000000000..4b10d67e4336 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml > > @@ -0,0 +1,90 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +# Copyright (C) 2022 Renesas Electronics Corp. > > +%YAML 1.2 > > +--- > > +$id: <snip URL> > > +$schema: <snip URL> > > + > > +title: Renesas R-Car Gen4 PCIe Endpoint > > + > > +maintainers: > > + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > > + > > +allOf: > > + - $ref: snps,dw-pcie-ep.yaml# > > + > > +properties: > > + compatible: > > + items: > > + - const: renesas,r8a779f0-pcie-ep # R-Car S4-8 > > + - const: renesas,rcar-gen4-pcie-ep # R-Car Gen4 > > + > > + reg: > > + maxItems: 4 > > + > > + reg-names: > > + items: > > + - const: dbi > > + - const: atu > > > + - const: appl > > Please, use "elbi" or "app" instead. No need in using the > vendor-specific names if there is the generic ones. > (* @Rob, that's why I was insisting in failing the DT-bindings > evaluation for such cases...) > See Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml:98 I got it. I'll fix it. > > + - const: addr_space > > + > > + interrupts: > > + maxItems: 3 > > + > > + interrupt-names: > > + items: > > > + - const: dma > > Are you sure there is a single IRQ line for all eDMA channels? Yes. > Judging by the DW PCIe HW manual the eDMA events are signaled by the > wires: edma_int[((CC_NUM_DMA_RD_CHAN+CC_NUM_DMA_WR_CHAN)-1):0]. If you > have a single signal then they must have been combined on the way to > the GIC though... I think so. The drivers/dma/dw-edma/dw-edma-core.c seems to support nr_irqs == 1. > > + - const: sft_ce > > + - const: app > > + > > + power-domains: > > + maxItems: 1 > > + > > + resets: > > + maxItems: 1 > > + > > + clocks: > > + maxItems: 1 > > + > > > + max-link-speed: true > > This prop is determined by the CX_MAX_PCIE_SPEED IP-core synthesize > parameter. > > > + > > + num-lanes: true > > This is determined by the CX_NL IP-core synthesize parameter. > > Thus you can provide at least the 'maximum' constraint for > the properties above. I'll add 'maximum' to each property. > > + > > +required: > > + - compatible > > + - reg > > + - reg-names > > + - interrupts > > + - resets > > + - power-domains > > + - clocks > > + > > +additionalProperties: false > > Are you sure that none of the next properties will be ever used in > the R-Car PCIe End-point DT-nodes? > max-functions > max-virtual-functions > phys > phy-names > reset-gpios > snps,enable-cdm-check > dma-coherent > * etc > > I am pretty much sure that the reset-gpios (platform-specific), > max-{virtual-}functions (determined by the CX_NFUNC IP-core synthesize > parameter), phys/phy-names (you had a PHYs CSR space in the > DT-bindings example) and dma-coherent properties are relevant for your > device. At the very least the 'max-functions' prop constraint could be > explicitly added to your DT-bindings file. You must be aware of how > many functions the R-Car PCIe EP support, right? The R-Car PCIe EP supports two functions. So, I'll add 'max-functions' property with 'maximum: 2'. > The rest of the > properties could be implicitly evaluated by replacing the > "additionalProperties: false" flag with the "unevaluatedProperties: > false" statement. I got it. I'll change "additionalProperties: false" to "unevaluatedProperties: false". Best regards, Yoshihiro Shimoda > -Serge(y) > > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/r8a779f0-cpg-mssr.h> > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + #include <dt-bindings/power/r8a779f0-sysc.h> > > + > > + soc { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + pcie0_ep: pcie-ep@e65d0000 { > > + compatible = "renesas,r8a779f0-pcie-ep", "renesas,rcar-gen4-pcie-ep"; > > + reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d1000 0 0x1000>, > > + <0 0xe65d3000 0 0x2000>, <0 0xfe000000 0 0x400000>; > > + reg-names = "dbi", "atu", "appl", "addr_space"; > > + interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-names = "dma", "sft_ce", "app"; > > + clocks = <&cpg CPG_MOD 624>; > > + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; > > + resets = <&cpg 624>; > > + num-lanes = <2>; > > + max-link-speed = <2>; > > + }; > > + }; > > -- > > 2.25.1 > > > >
diff --git a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml new file mode 100644 index 000000000000..4b10d67e4336 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rcar-gen4-pci-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Gen4 PCIe Endpoint + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +allOf: + - $ref: snps,dw-pcie-ep.yaml# + +properties: + compatible: + items: + - const: renesas,r8a779f0-pcie-ep # R-Car S4-8 + - const: renesas,rcar-gen4-pcie-ep # R-Car Gen4 + + reg: + maxItems: 4 + + reg-names: + items: + - const: dbi + - const: atu + - const: appl + - const: addr_space + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: dma + - const: sft_ce + - const: app + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + max-link-speed: true + + num-lanes: true + +required: + - compatible + - reg + - reg-names + - interrupts + - resets + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a779f0-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a779f0-sysc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie0_ep: pcie-ep@e65d0000 { + compatible = "renesas,r8a779f0-pcie-ep", "renesas,rcar-gen4-pcie-ep"; + reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d1000 0 0x1000>, + <0 0xe65d3000 0 0x2000>, <0 0xfe000000 0 0x400000>; + reg-names = "dbi", "atu", "appl", "addr_space"; + interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma", "sft_ce", "app"; + clocks = <&cpg CPG_MOD 624>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 624>; + num-lanes = <2>; + max-link-speed = <2>; + }; + };