@@ -107,6 +107,12 @@ periph_clk: periph_clk {
clock-frequency = <50000000>;
clock-output-names = "periph";
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <400000000>;
+ };
};
soc {
@@ -531,6 +537,18 @@ leds: leds@800 {
#size-cells = <0>;
};
+ hsspi: spi@1000{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm4908-hsspi", "brcm,bcmbca-hsspi-v1.0";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
nand-controller@1800 {
#address-cells = <1>;
#size-cells = <0>;
@@ -79,6 +79,7 @@ periph_clk: periph-clk {
#clock-cells = <0>;
clock-frequency = <200000000>;
};
+
uart_clk: uart-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
@@ -86,6 +87,12 @@ uart_clk: uart-clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
};
psci {
@@ -117,6 +124,19 @@ bus@ff800000 {
#size-cells = <1>;
ranges = <0x0 0x0 0xff800000 0x800000>;
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm4912-hsspi", "brcm,bcmbca-hsspi-v1.1";
+ reg = <0x1000 0x600>, <0x2610 0x4>;
+ reg-names = "hsspi", "spim-ctrl";
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
@@ -60,6 +60,7 @@ periph_clk: periph-clk {
#clock-cells = <0>;
clock-frequency = <200000000>;
};
+
uart_clk: uart-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
@@ -67,6 +68,12 @@ uart_clk: uart-clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
};
psci {
@@ -99,6 +106,18 @@ bus@ff800000 {
#size-cells = <1>;
ranges = <0x0 0x0 0xff800000 0x800000>;
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63146-hsspi", "brcm,bcmbca-hsspi-v1.0";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
@@ -79,6 +79,7 @@ periph_clk: periph-clk {
#clock-cells = <0>;
clock-frequency = <200000000>;
};
+
uart_clk: uart-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
@@ -86,6 +87,12 @@ uart_clk: uart-clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <400000000>;
+ };
};
psci {
@@ -117,6 +124,18 @@ bus@ff800000 {
#size-cells = <1>;
ranges = <0x0 0x0 0xff800000 0x800000>;
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63158-hsspi", "brcm,bcmbca-hsspi-v1.0";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
@@ -79,6 +79,7 @@ periph_clk: periph-clk {
#clock-cells = <0>;
clock-frequency = <200000000>;
};
+
uart_clk: uart-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
@@ -86,6 +87,12 @@ uart_clk: uart-clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
};
psci {
@@ -117,6 +124,19 @@ bus@ff800000 {
#size-cells = <1>;
ranges = <0x0 0x0 0xff800000 0x800000>;
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6813-hsspi", "brcm,bcmbca-hsspi-v1.1";
+ reg = <0x1000 0x600>, <0x2610 0x4>;
+ reg-names = "hsspi", "spim-ctrl";
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
@@ -60,6 +60,12 @@ periph_clk:periph-clk {
#clock-cells = <0>;
clock-frequency = <200000000>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <400000000>;
+ };
};
psci {
@@ -100,5 +106,17 @@ uart0: serial@640 {
clock-names = "refclk";
status = "disabled";
};
+
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6856-hsspi", "brcm,bcmbca-hsspi-v1.0";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
};
};
@@ -78,6 +78,12 @@ periph_clk:periph-clk {
#clock-cells = <0>;
clock-frequency = <200000000>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <400000000>;
+ };
};
psci {
@@ -137,5 +143,17 @@ uart0: serial@640 {
clock-names = "refclk";
status = "disabled";
};
+
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6858-hsspi", "brcm,bcmbca-hsspi-v1.0";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
};
};
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
Add support for HSSPI controller in ARMv8 chip dts files. Signed-off-by: William Zhang <william.zhang@broadcom.com> --- Changes in v3: - Drop the generic compatible string brcm,bcmbca-hsspi Changes in v2: - Update compatible string with SoC model number, controller version info and bcmbca fall back name - Add interrupt property .../boot/dts/broadcom/bcmbca/bcm4908.dtsi | 18 +++++++++++++++++ .../boot/dts/broadcom/bcmbca/bcm4912.dtsi | 20 +++++++++++++++++++ .../boot/dts/broadcom/bcmbca/bcm63146.dtsi | 19 ++++++++++++++++++ .../boot/dts/broadcom/bcmbca/bcm63158.dtsi | 19 ++++++++++++++++++ .../boot/dts/broadcom/bcmbca/bcm6813.dtsi | 20 +++++++++++++++++++ .../boot/dts/broadcom/bcmbca/bcm6856.dtsi | 18 +++++++++++++++++ .../boot/dts/broadcom/bcmbca/bcm6858.dtsi | 18 +++++++++++++++++ .../boot/dts/broadcom/bcmbca/bcm94908.dts | 4 ++++ .../boot/dts/broadcom/bcmbca/bcm94912.dts | 4 ++++ .../boot/dts/broadcom/bcmbca/bcm963146.dts | 4 ++++ .../boot/dts/broadcom/bcmbca/bcm963158.dts | 4 ++++ .../boot/dts/broadcom/bcmbca/bcm96813.dts | 4 ++++ .../boot/dts/broadcom/bcmbca/bcm96856.dts | 4 ++++ .../boot/dts/broadcom/bcmbca/bcm96858.dts | 4 ++++ 14 files changed, 160 insertions(+)