@@ -142,15 +142,15 @@ hsi2c_7: i2c@12cd0000 {
status = "disabled";
};
- usbdrd3_0: usb3-0 {
+ usbdrd3_0: usb@12000000 {
compatible = "samsung,exynos5250-dwusb3";
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0x0 0x12000000 0x10000>;
- usbdrd_dwc3_0: usb@12000000 {
+ usbdrd_dwc3_0: usb@0 {
compatible = "snps,dwc3";
- reg = <0x12000000 0x10000>;
+ reg = <0x0 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
phy-names = "usb2-phy", "usb3-phy";
@@ -164,15 +164,15 @@ usbdrd_phy0: phy@12100000 {
#phy-cells = <1>;
};
- usbdrd3_1: usb3-1 {
+ usbdrd3_1: usb@12400000 {
compatible = "samsung,exynos5250-dwusb3";
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0x0 0x12400000 0x10000>;
- usbdrd_dwc3_1: usb@12400000 {
+ usbdrd_dwc3_1: usb@0 {
compatible = "snps,dwc3";
- reg = <0x12400000 0x10000>;
+ reg = <0x0 0x10000>;
phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
phy-names = "usb2-phy", "usb3-phy";
snps,dis_u3_susphy_quirk;
Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node which do not have unit address. Therefore usethe address space of child device (actual DWC3 Controller) as the wrapper's address to fix: exynos5422-odroidhc1.dtb: soc: usb3-0: {'compatible': ['samsung,exynos5250-dwusb3'], ... } should not be valid under {'type': 'object'} exynos54xx.dtsi:145.21-159.5: Warning (simple_bus_reg): /soc/usb3-0: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Changes since v1: 1. Use ranges with values and drop reg from usb-wrapper node. 2. Keep "usb" as wrapper's node name. --- arch/arm/boot/dts/exynos54xx.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)