@@ -45,38 +45,38 @@ poweroff: poweroff@10548010 {
};
&serial0 {
- status = "ok";
+ status = "okay";
};
&sata1 {
- status = "ok";
+ status = "okay";
};
&sata2 {
- status = "ok";
+ status = "okay";
};
&sata3 {
- status = "ok";
+ status = "okay";
};
&sgenet0 {
- status = "ok";
+ status = "okay";
};
&xgenet1 {
- status = "ok";
+ status = "okay";
};
&mmc0 {
- status = "ok";
+ status = "okay";
};
&i2c4 {
rtc68: rtc@68 {
compatible = "dallas,ds1337";
reg = <0x68>;
- status = "ok";
+ status = "okay";
};
};
@@ -45,36 +45,36 @@ poweroff: poweroff@10548010 {
};
&pcie0clk {
- status = "ok";
+ status = "okay";
};
&pcie0 {
- status = "ok";
+ status = "okay";
};
&serial0 {
- status = "ok";
+ status = "okay";
};
&menet {
- status = "ok";
+ status = "okay";
};
&sgenet0 {
- status = "ok";
+ status = "okay";
};
&sgenet1 {
- status = "ok";
+ status = "okay";
};
&xgenet {
- status = "ok";
+ status = "okay";
rxlos-gpios = <&sbgpio 12 1>;
};
&mmc0 {
- status = "ok";
+ status = "okay";
};
&mdio {
@@ -270,7 +270,7 @@ sataphy2clk: sataphy1clk@1f22c000 {
reg = <0x0 0x1f22c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "sataphy2clk";
- status = "ok";
+ status = "okay";
csr-offset = <0x4>;
csr-mask = <0x3a>;
enable-offset = <0x0>;
@@ -284,7 +284,7 @@ sataphy3clk: sataphy1clk@1f23c000 {
reg = <0x0 0x1f23c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "sataphy3clk";
- status = "ok";
+ status = "okay";
csr-offset = <0x4>;
csr-mask = <0x3a>;
enable-offset = <0x0>;
@@ -860,7 +860,7 @@ phy2: phy@1f22a000 {
reg = <0x0 0x1f22a000 0x0 0x100>;
#phy-cells = <1>;
clocks = <&sataphy2clk 0>;
- status = "ok";
+ status = "okay";
apm,tx-boost-gain = <30 30 30 30 30 30>;
apm,tx-eye-tuning = <1 10 10 2 10 10>;
};
@@ -870,7 +870,7 @@ phy3: phy@1f23a000 {
reg = <0x0 0x1f23a000 0x0 0x100>;
#phy-cells = <1>;
clocks = <&sataphy3clk 0>;
- status = "ok";
+ status = "okay";
apm,tx-boost-gain = <31 31 31 31 31 31>;
apm,tx-eye-tuning = <2 10 10 2 10 10>;
};
@@ -899,7 +899,7 @@ sata2: sata@1a400000 {
<0x0 0x1f227000 0x0 0x1000>;
interrupts = <0x0 0x87 0x4>;
dma-coherent;
- status = "ok";
+ status = "okay";
clocks = <&sata23clk 0>;
phys = <&phy2 0>;
phy-names = "sata-phy";
@@ -913,7 +913,7 @@ sata3: sata@1a800000 {
<0x0 0x1f23e000 0x0 0x1000>;
interrupts = <0x0 0x88 0x4>;
dma-coherent;
- status = "ok";
+ status = "okay";
clocks = <&sata45clk 0>;
phys = <&phy3 0>;
phy-names = "sata-phy";
"okay" over "ok" is preferred for status property. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/apm/apm-merlin.dts | 16 ++++++++-------- arch/arm64/boot/dts/apm/apm-mustang.dts | 16 ++++++++-------- arch/arm64/boot/dts/apm/apm-storm.dtsi | 12 ++++++------ 3 files changed, 22 insertions(+), 22 deletions(-)