@@ -327,24 +327,6 @@ static int power_down(struct v4l2_subdev *sd)
return 0;
}
-static int ov2680_s_power(struct v4l2_subdev *sd, int on)
-{
- struct ov2680_device *dev = to_ov2680_sensor(sd);
- int ret;
-
- mutex_lock(&dev->input_lock);
-
- if (on == 0) {
- ret = power_down(sd);
- } else {
- ret = power_up(sd);
- }
-
- mutex_unlock(&dev->input_lock);
-
- return ret;
-}
-
static struct v4l2_mbus_framefmt *
__ov2680_get_pad_format(struct ov2680_device *sensor,
struct v4l2_subdev_state *state,
@@ -393,14 +375,12 @@ static void ov2680_calc_mode(struct ov2680_device *sensor, int width, int height
sensor->mode.vts = OV2680_LINES_PER_FRAME;
}
-static int ov2680_set_mode(struct ov2680_device *sensor, int width, int height)
+static int ov2680_set_mode(struct ov2680_device *sensor)
{
struct i2c_client *client = sensor->client;
u8 pll_div, unknown, inc, fmt1, fmt2;
int ret;
- ov2680_calc_mode(sensor, width, height);
-
if (sensor->mode.binning) {
pll_div = 1;
unknown = 0x23;
@@ -500,7 +480,6 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct v4l2_mbus_framefmt *fmt;
unsigned int width, height;
- int ret = 0;
dev_dbg(&client->dev, "%s: %s: pad: %d, fmt: %p\n",
__func__,
@@ -518,23 +497,10 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
if (format->which == V4L2_SUBDEV_FORMAT_TRY)
return 0;
- dev_dbg(&client->dev, "%s: %dx%d\n",
- __func__, fmt->width, fmt->height);
-
mutex_lock(&dev->input_lock);
-
- /* s_power has not been called yet for std v4l2 clients (camorama) */
- power_up(sd);
-
- ret = ov2680_set_mode(dev, fmt->width, fmt->height);
- if (ret < 0)
- goto err;
-
- /* Restore value of all ctrls */
- ret = __v4l2_ctrl_handler_setup(&dev->ctrls.handler);
-err:
+ ov2680_calc_mode(dev, fmt->width, fmt->height);
mutex_unlock(&dev->input_lock);
- return ret;
+ return 0;
}
static int ov2680_get_fmt(struct v4l2_subdev *sd,
@@ -584,30 +550,50 @@ static int ov2680_detect(struct i2c_client *client)
static int ov2680_s_stream(struct v4l2_subdev *sd, int enable)
{
- struct ov2680_device *dev = to_ov2680_sensor(sd);
+ struct ov2680_device *sensor = to_ov2680_sensor(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret;
+ int ret = 0;
- mutex_lock(&dev->input_lock);
- if (enable)
- dev_dbg(&client->dev, "ov2680_s_stream one\n");
- else
- dev_dbg(&client->dev, "ov2680_s_stream off\n");
-
- ret = ovxxxx_write_reg8(client, OV2680_SW_STREAM,
- enable ? OV2680_START_STREAMING : OV2680_STOP_STREAMING);
- if (ret == 0) {
- dev->is_streaming = enable;
- v4l2_ctrl_activate(dev->ctrls.vflip, !enable);
- v4l2_ctrl_activate(dev->ctrls.hflip, !enable);
+ mutex_lock(&sensor->input_lock);
+
+ if (sensor->is_streaming == enable) {
+ dev_warn(&client->dev, "stream already %sed\n", enable ? "start" : "stopp");
+ goto error_unlock;
}
- //otp valid at stream on state
- //if(!dev->otp_data)
- // dev->otp_data = ov2680_otp_read(sd);
+ if (enable) {
+ ret = power_up(sd);
+ if (ret)
+ goto error_unlock;
- mutex_unlock(&dev->input_lock);
+ ret = ov2680_set_mode(sensor);
+ if (ret)
+ goto error_power_down;
+ /* Restore value of all ctrls */
+ ret = __v4l2_ctrl_handler_setup(&sensor->ctrls.handler);
+ if (ret)
+ goto error_power_down;
+
+ ret = ovxxxx_write_reg8(client, OV2680_SW_STREAM, OV2680_START_STREAMING);
+ if (ret)
+ goto error_power_down;
+ } else {
+ ovxxxx_write_reg8(client, OV2680_SW_STREAM, OV2680_STOP_STREAMING);
+ power_down(sd);
+ }
+
+ sensor->is_streaming = enable;
+ v4l2_ctrl_activate(sensor->ctrls.vflip, !enable);
+ v4l2_ctrl_activate(sensor->ctrls.hflip, !enable);
+
+ mutex_unlock(&sensor->input_lock);
+ return 0;
+
+error_power_down:
+ power_down(sd);
+error_unlock:
+ mutex_unlock(&sensor->input_lock);
return ret;
}
@@ -736,10 +722,6 @@ static const struct v4l2_subdev_sensor_ops ov2680_sensor_ops = {
.g_skip_frames = ov2680_g_skip_frames,
};
-static const struct v4l2_subdev_core_ops ov2680_core_ops = {
- .s_power = ov2680_s_power,
-};
-
static const struct v4l2_subdev_pad_ops ov2680_pad_ops = {
.enum_mbus_code = ov2680_enum_mbus_code,
.enum_frame_size = ov2680_enum_frame_size,
@@ -749,7 +731,6 @@ static const struct v4l2_subdev_pad_ops ov2680_pad_ops = {
};
static const struct v4l2_subdev_ops ov2680_ops = {
- .core = &ov2680_core_ops,
.video = &ov2680_video_ops,
.pad = &ov2680_pad_ops,
.sensor = &ov2680_sensor_ops,
Move the setting of the mode to stream on, this also allows delaying power-on till streaming is started. And drop the deprecated s_power callback since this now no long is necessary. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- .../media/atomisp/i2c/atomisp-ov2680.c | 101 +++++++----------- 1 file changed, 41 insertions(+), 60 deletions(-)