new file mode 100644
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx708.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.3-Inch 12Mpixel CMOS Digital Image Sensor
+
+maintainers:
+ - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description: |-
+ The Sony IMX708 is a 1/2.3-inch CMOS active pixel digital image sensor
+ with an active array size of 4608H x 2592V. It is programmable through
+ I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet.
+ Image data is sent through MIPI CSI-2, which is configured as either 2 or
+ 4 data lanes.
+
+properties:
+ compatible:
+ const: sony,imx708
+
+ reg:
+ description: I2C device address
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ VDIG-supply:
+ description:
+ Digital I/O voltage supply, 1.1 volts
+
+ VANA1-supply:
+ description:
+ Analog1 voltage supply, 2.8 volts
+
+ VANA2-supply:
+ description:
+ Analog2 voltage supply, 1.8 volts
+
+ VDDL-supply:
+ description:
+ Digital core voltage supply, 1.8 volts
+
+ reset-gpios:
+ description: |-
+ Reference to the GPIO connected to the xclr pin, if any.
+ Must be released (set high) after all supplies and INCK are applied.
+
+ # See ../video-interfaces.txt for more details
+ port:
+ type: object
+ properties:
+ endpoint:
+ type: object
+ properties:
+ data-lanes:
+ description: |-
+ The sensor supports either two-lane, or four-lane operation.
+ For two-lane operation the property must be set to <1 2>.
+ items:
+ - const: 1
+ - const: 2
+
+ clock-noncontinuous:
+ type: boolean
+ description: |-
+ MIPI CSI-2 clock is non-continuous if this property is present,
+ otherwise it's continuous.
+
+ link-frequencies:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint64-array
+ description:
+ Allowed data bus frequencies.
+
+ required:
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - VANA1-supply
+ - VANA2-supply
+ - VDIG-supply
+ - VDDL-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imx708: sensor@1a {
+ compatible = "sony,imx708";
+ reg = <0x1a>;
+ clocks = <&imx708_clk>;
+ VANA1-supply = <&imx708_vana1>; /* 1.8v */
+ VANA2-supply = <&imx708_vana2>; /* 2.8v */
+ VDIG-supply = <&imx708_vdig>; /* 1.1v */
+ VDDL-supply = <&imx708_vddl>; /* 1.8v */
+
+ port {
+ imx708_0: endpoint {
+ remote-endpoint = <&csi1_ep>;
+ data-lanes = <1 2>;
+ clock-noncontinuous;
+ link-frequencies = /bits/ 64 <450000000>;
+ };
+ };
+ };
+ };
+
+...
@@ -19503,6 +19503,13 @@ T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
F: drivers/media/i2c/imx412.c
+M: Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/imx708.yaml
+F: drivers/media/i2c/imx708.c
+
SONY MEMORYSTICK SUBSYSTEM
M: Maxim Levitsky <maximlevitsky@gmail.com>
M: Alex Dubov <oakad@yahoo.com>