diff mbox series

[v2,1/4] arm64: dts: qcom: use generic node name for Bluetooth

Message ID 20230123125612.154840-1-krzysztof.kozlowski@linaro.org
State Accepted
Commit f7aaaf3030d8c9873b2bb3abbe506fa4da8936cf
Headers show
Series [v2,1/4] arm64: dts: qcom: use generic node name for Bluetooth | expand

Commit Message

Krzysztof Kozlowski Jan. 23, 2023, 12:56 p.m. UTC
Node names should be generic (as Devicetree spec mandates), so use
"bluetooth" for BT node.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v1:
1. Fix also msm8996-xiaomi-common
---
 arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/sc7180-idp.dts             | 2 +-
 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi          | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 5b47b8de69da..2acfed28e3cb 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -229,7 +229,7 @@  &blsp1_uart2 {
 	status = "okay";
 	label = "QCA_UART";
 
-	bluetooth: qca6174a {
+	bluetooth: bluetooth {
 		compatible = "qcom,qca6174-bt";
 
 		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 774f9d45f051..6ea8dd7d3e01 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -430,7 +430,7 @@  &uart3 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-1 = <&qup_uart3_sleep>;
 
-	bluetooth: wcn3990-bt {
+	bluetooth: bluetooth {
 		compatible = "qcom,wcn3990-bt";
 		vddio-supply = <&vreg_l10a_1p8>;
 		vddxo-supply = <&vreg_l1c_1p8>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index a78075155310..e19178c1ec44 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -862,7 +862,7 @@  &uart6 {
 
 	pinctrl-0 = <&qup_uart6_4pin>;
 
-	bluetooth: wcn3990-bt {
+	bluetooth: bluetooth {
 		compatible = "qcom,wcn3990-bt";
 		vddio-supply = <&src_pp1800_s4a>;
 		vddxo-supply = <&pp1800_l7a_wcn3990>;