@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A10 SPI Controller
allOf:
- - $ref: "spi-controller.yaml"
+ - $ref: spi-controller.yaml
maintainers:
- Chen-Yu Tsai <wens@csie.org>
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A31 SPI Controller
allOf:
- - $ref: "spi-controller.yaml"
+ - $ref: spi-controller.yaml
maintainers:
- Chen-Yu Tsai <wens@csie.org>
@@ -2,8 +2,8 @@
# Copyright 2019 BayLibre, SAS
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/spi/amlogic,meson-gx-spicc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/amlogic,meson-gx-spicc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Amlogic Meson SPI Communication Controller
@@ -41,7 +41,7 @@ properties:
maxItems: 2
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
- if:
properties:
compatible:
@@ -2,8 +2,8 @@
# Copyright 2019 BayLibre, SAS
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/spi/amlogic,meson6-spifc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/amlogic,meson6-spifc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Amlogic Meson SPI Flash Controller
@@ -11,7 +11,7 @@ maintainers:
- Neil Armstrong <neil.armstrong@linaro.org>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
description: |
The Meson SPIFC is a controller optimized for communication with SPI
@@ -15,7 +15,7 @@ description: |
SPI) of the AST2400, AST2500 and AST2600 SOCs.
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
@@ -47,7 +47,7 @@ properties:
cdns,fifo-depth:
description:
Size of the data FIFO in words.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [ 128, 256 ]
default: 128
@@ -2,8 +2,8 @@
# Copyright 2020-21 Cadence
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/spi/cdns,xspi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/cdns,xspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cadence XSPI Controller
@@ -16,7 +16,7 @@ description: |
read/write access to slaves such as SPI-NOR flash.
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
@@ -10,7 +10,7 @@ maintainers:
- Han Xu <han.xu@nxp.com>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
@@ -10,7 +10,7 @@ maintainers:
- Shawn Guo <shawnguo@kernel.org>
allOf:
- - $ref: "/schemas/spi/spi-controller.yaml#"
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
@@ -10,7 +10,7 @@ maintainers:
- Leilk Liu <leilk.liu@mediatek.com>
allOf:
- - $ref: "/schemas/spi/spi-controller.yaml#"
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
@@ -10,7 +10,7 @@ maintainers:
- Leilk Liu <leilk.liu@mediatek.com>
allOf:
- - $ref: "/schemas/spi/spi-controller.yaml#"
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
@@ -11,7 +11,7 @@ maintainers:
- Bert Vermeulen <bert@biot.com>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
@@ -10,7 +10,7 @@ maintainers:
- Miquel Raynal <miquel.raynal@bootlin.com>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
@@ -10,7 +10,7 @@ maintainers:
- Marek Vasut <marex@denx.de>
allOf:
- - $ref: "/schemas/spi/spi-controller.yaml#"
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
@@ -11,7 +11,7 @@ maintainers:
- Jonathan Hunter <jonathanh@nvidia.com>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
@@ -1,9 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Quad Serial Peripheral Interface (QSPI)
@@ -11,7 +11,7 @@ maintainers:
- Birger Koblitz <mail@birger-koblitz.de>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
@@ -10,7 +10,7 @@ maintainers:
- Mark Brown <broonie@kernel.org>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
- if:
properties:
compatible:
@@ -10,7 +10,7 @@ maintainers:
- Michal Simek <michal.simek@xilinx.com>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
@@ -10,7 +10,7 @@ maintainers:
- Anson Huang <Anson.Huang@nxp.com>
allOf:
- - $ref: "/schemas/spi/spi-controller.yaml#"
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
@@ -14,7 +14,7 @@ description:
dedicated GPIO lines.
allOf:
- - $ref: "/schemas/spi/spi-controller.yaml#"
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
@@ -41,7 +41,7 @@ properties:
num-chipselects:
description: Number of chipselect lines. Should be <0> if a single device
with no chip select is connected.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
# Deprecated properties
gpio-sck: false
@@ -30,8 +30,8 @@ description: |
+------------+
allOf:
- - $ref: "/schemas/spi/spi-controller.yaml#"
- - $ref: "/schemas/spi/spi-peripheral-props.yaml#"
+ - $ref: /schemas/spi/spi-controller.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
maintainers:
- Chris Packham <chris.packham@alliedtelesis.co.nz>
@@ -11,7 +11,7 @@ maintainers:
- Kuldeep Singh <singh.kuldeep87k@gmail.com>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
@@ -10,7 +10,7 @@ maintainers:
- Linus Walleij <linus.walleij@linaro.org>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
# We need a select here so we don't match all nodes with 'arm,primecell'
select:
@@ -45,7 +45,7 @@ properties:
description: delay in ms following transfer completion before the
runtime power management system suspends the device. A setting of 0
indicates no delay and the device will be suspended immediately.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
pl022,rt:
description: indicates the controller should run the message pump with realtime
@@ -81,7 +81,7 @@ patternProperties:
properties:
pl022,interface:
description: SPI interface type
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum:
- 0 # SPI
- 1 # Texas Instruments Synchronous Serial Frame Format
@@ -89,7 +89,7 @@ patternProperties:
pl022,com-mode:
description: Specifies the transfer mode
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum:
- 0 # interrupt mode
- 1 # polling mode
@@ -98,30 +98,30 @@ patternProperties:
pl022,rx-level-trig:
description: Rx FIFO watermark level
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 4
pl022,tx-level-trig:
description: Tx FIFO watermark level
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 4
pl022,ctrl-len:
description: Microwire interface - Control length
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0x03
maximum: 0x1f
pl022,wait-state:
description: Microwire interface - Wait state
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
pl022,duplex:
description: Microwire interface - Full/Half duplex
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
required:
@@ -11,7 +11,7 @@ description:
as flash and display controllers using the SPI communication interface.
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
maintainers:
- Heiko Stuebner <heiko@sntech.de>
@@ -12,7 +12,7 @@ maintainers:
- Palmer Dabbelt <palmer@sifive.com>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
@@ -51,14 +51,14 @@ properties:
sifive,fifo-depth:
description:
Depth of hardware queues; defaults to 8
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [8]
default: 8
sifive,max-bits-per-word:
description:
Maximum bits per word; defaults to 8
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3, 4, 5, 6, 7, 8]
default: 8
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Sunplus sp7021 SPI controller
allOf:
- - $ref: "spi-controller.yaml"
+ - $ref: spi-controller.yaml
maintainers:
- Li-hao Kuo <lhjeff911@gmail.com>
@@ -10,7 +10,7 @@ maintainers:
- Michal Simek <michal.simek@xilinx.com>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
@@ -10,7 +10,7 @@ maintainers:
- Michal Simek <michal.simek@xilinx.com>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
@@ -1,9 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Spreadtrum ADI controller
@@ -11,7 +11,7 @@ maintainers:
- Patrice Chotard <patrice.chotard@foss.st.com>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
properties:
compatible:
@@ -17,7 +17,7 @@ maintainers:
- Fabrice Gasnier <fabrice.gasnier@foss.st.com>
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
- if:
properties:
compatible:
@@ -11,7 +11,7 @@ description:
memory devices.
allOf:
- - $ref: "spi-controller.yaml#"
+ - $ref: spi-controller.yaml#
maintainers:
- Michal Simek <michal.simek@xilinx.com>