| Message ID | 20230123125612.154840-3-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/4] arm64: dts: qcom: use generic node name for Bluetooth | expand |
On 23.01.2023 13:56, Krzysztof Kozlowski wrote: > The serial/UART device node does not have children with unit addresses, > so adderss/size cells are not correct. > > Fixes: f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node") > Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI") > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > > Changes since v1: > 1. None > --- > arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ---- > 1 file changed, 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi > index d66dcd8fe61f..395a3a156e24 100644 > --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi > @@ -1017,8 +1017,6 @@ uart20: serial@894000 { > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart20_default>; > interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; > - #address-cells = <1>; > - #size-cells = <0>; > status = "disabled"; > }; > > @@ -1411,8 +1409,6 @@ uart7: serial@99c000 { > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; > interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; > - #address-cells = <1>; > - #size-cells = <0>; > status = "disabled"; > }; > };
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index d66dcd8fe61f..395a3a156e24 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -1017,8 +1017,6 @@ uart20: serial@894000 { pinctrl-names = "default"; pinctrl-0 = <&qup_uart20_default>; interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; @@ -1411,8 +1409,6 @@ uart7: serial@99c000 { pinctrl-names = "default"; pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; };
The serial/UART device node does not have children with unit addresses, so adderss/size cells are not correct. Fixes: f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node") Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Changes since v1: 1. None --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ---- 1 file changed, 4 deletions(-)