diff mbox series

[v3,1/2] dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional

Message ID 20230123193422.15972-1-ansuelsmth@gmail.com
State Superseded
Headers show
Series [v3,1/2] dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional | expand

Commit Message

Christian Marangi Jan. 23, 2023, 7:34 p.m. UTC
The qcom-cpufreq-nvmem driver supports 2 kind of devices:
- pre-cpr that doesn't have power-domains and base everything on nvmem
  cells and multiple named microvolt bindings
- cpr-based that require power-domain in the cpu nodes and use various
  source to decide the correct voltage and freq

When the schema was introduced, it was wrongly set to always require these
binding but this is not the case for pre-cpr devices.

Make the power-domain optional and set them required only for qcs404
based devices.

While at it also make more clear what the opp-table supports by adding
ref to the opp-v2-kryo-cpu and opp-v2-qcom-level schema.

Fixes: ec24d1d55469 ("dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---

Changes v2:
- Reword commit description
- Fix condition order
- Add allOf

 .../bindings/cpufreq/qcom-cpufreq-nvmem.yaml  | 81 +++++++++++++------
 1 file changed, 56 insertions(+), 25 deletions(-)

Comments

Krzysztof Kozlowski Jan. 26, 2023, 11:17 a.m. UTC | #1
On 23/01/2023 20:34, Christian Marangi wrote:
> The qcom-cpufreq-nvmem driver supports 2 kind of devices:
> - pre-cpr that doesn't have power-domains and base everything on nvmem
>   cells and multiple named microvolt bindings
> - cpr-based that require power-domain in the cpu nodes and use various
>   source to decide the correct voltage and freq
> 
> When the schema was introduced, it was wrongly set to always require these
> binding but this is not the case for pre-cpr devices.
> 
> Make the power-domain optional and set them required only for qcs404
> based devices.
> 
> While at it also make more clear what the opp-table supports by adding
> ref to the opp-v2-kryo-cpu and opp-v2-qcom-level schema.
> 
> Fixes: ec24d1d55469 ("dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema")
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
> 
> Changes v2:
> - Reword commit description
> - Fix condition order
> - Add allOf
> 
>  .../bindings/cpufreq/qcom-cpufreq-nvmem.yaml  | 81 +++++++++++++------
>  1 file changed, 56 insertions(+), 25 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
> index 9c086eac6ca7..6f5e7904181f 100644
> --- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
> +++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
> @@ -17,6 +17,9 @@ description: |
>    on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level
>    according to the required OPPs defined in the CPU OPP tables.
>  
> +  For old implementation efuses are parsed to select the correct opp table and
> +  voltage and CPR is not supported/used.
> +
>  select:
>    properties:
>      compatible:
> @@ -33,37 +36,65 @@ select:
>    required:
>      - compatible
>  
> -properties:
> -  cpus:
> -    type: object
> -
> -    patternProperties:
> -      '^cpu@[0-9a-f]+$':
> -        type: object
> -
> -        properties:
> -          power-domains:
> -            maxItems: 1
> -
> -          power-domain-names:
> -            items:
> -              - const: cpr
> -
> -        required:
> -          - power-domains
> -          - power-domain-names
> -
>  patternProperties:
>    '^opp-table(-[a-z0-9]+)?$':
> -    if:
> +    allOf:
> +      - if:
> +          properties:
> +            compatible:
> +              const: operating-points-v2-kryo-cpu
> +        then:
> +          $ref: /schemas/opp/opp-v2-kryo-cpu.yaml#
> +
> +      - if:
> +          properties:
> +            compatible:
> +              const: operating-points-v2-qcom-level
> +        then:
> +          $ref: /schemas/opp/opp-v2-qcom-level.yaml#

This entire part looks independent, please split it into separate patch
with its own explanation. What I still miss here - why do you remove
"required-opps" from required properties. It's not clear to me at all.


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
index 9c086eac6ca7..6f5e7904181f 100644
--- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
+++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
@@ -17,6 +17,9 @@  description: |
   on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level
   according to the required OPPs defined in the CPU OPP tables.
 
+  For old implementation efuses are parsed to select the correct opp table and
+  voltage and CPR is not supported/used.
+
 select:
   properties:
     compatible:
@@ -33,37 +36,65 @@  select:
   required:
     - compatible
 
-properties:
-  cpus:
-    type: object
-
-    patternProperties:
-      '^cpu@[0-9a-f]+$':
-        type: object
-
-        properties:
-          power-domains:
-            maxItems: 1
-
-          power-domain-names:
-            items:
-              - const: cpr
-
-        required:
-          - power-domains
-          - power-domain-names
-
 patternProperties:
   '^opp-table(-[a-z0-9]+)?$':
-    if:
+    allOf:
+      - if:
+          properties:
+            compatible:
+              const: operating-points-v2-kryo-cpu
+        then:
+          $ref: /schemas/opp/opp-v2-kryo-cpu.yaml#
+
+      - if:
+          properties:
+            compatible:
+              const: operating-points-v2-qcom-level
+        then:
+          $ref: /schemas/opp/opp-v2-qcom-level.yaml#
+
+    unevaluatedProperties: false
+
+allOf:
+  - if:
       properties:
         compatible:
-          const: operating-points-v2-kryo-cpu
+          contains:
+            enum:
+              - qcom,qcs404
+
     then:
+      properties:
+        cpus:
+          type: object
+
+          patternProperties:
+            '^cpu@[0-9a-f]+$':
+              type: object
+
+              properties:
+                power-domains:
+                  maxItems: 1
+
+                power-domain-names:
+                  items:
+                    - const: cpr
+
+              required:
+                - power-domains
+                - power-domain-names
+
       patternProperties:
-        '^opp-?[0-9]+$':
-          required:
-            - required-opps
+        '^opp-table(-[a-z0-9]+)?$':
+          if:
+            properties:
+              compatible:
+                const: operating-points-v2-kryo-cpu
+          then:
+            patternProperties:
+              '^opp-?[0-9]+$':
+                required:
+                  - required-opps
 
 additionalProperties: true