@@ -117,6 +117,51 @@ emmc: mmc@85020000 {
status = "disabled";
};
+ usb3drd: usb3drd@85070400 {
+ compatible = "renesas,r9a09g011-usb3drd",
+ "renesas,rzv2m-usb3drd";
+ reg = <0x0 0x85070400 0x0 0x100>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "drd", "bc", "gpi";
+ clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>,
+ <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+ clock-names = "axi", "reg";
+ resets = <&cpg R9A09G011_USB_DRD_RESET>;
+ power-domains = <&cpg>;
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ status = "disabled";
+
+ usb3host: usb@85060000 {
+ compatible = "renesas,r9a09g011-xhci",
+ "renesas,rzv2m-xhci";
+ reg = <0 0x85060000 0 0x2000>;
+ interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>,
+ <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+ clock-names = "axi", "reg";
+ resets = <&cpg R9A09G011_USB_ARESETN_H>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb3peri: usb3peri@85070000 {
+ compatible = "renesas,r9a09g011-usb3-peri",
+ "renesas,rzv2m-usb3-peri";
+ reg = <0x0 0x85070000 0x0 0x400>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>,
+ <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+ clock-names = "axi", "reg";
+ resets = <&cpg R9A09G011_USB_ARESETN_P>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+ };
+
avb: ethernet@a3300000 {
compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m";
reg = <0 0xa3300000 0 0x800>;
This patch add usb3 host and peripheral device node as child of usb3 drd node to RZ/V2M SoC dtsi. The host/device needs to issue reset release on DRD module before accessing host/device registers. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- v2->v3: * No change v1->v2: * Added all the USB3 nodes * Added reg property for USB3 peri * Added interrupt propertiees for DRD --- arch/arm64/boot/dts/renesas/r9a09g011.dtsi | 45 ++++++++++++++++++++++ 1 file changed, 45 insertions(+)