@@ -282,6 +282,58 @@ pwm: pwm@11006000 {
clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
};
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+ reg = <0 0x11007000 0 0xa0>, <0 0x11000080 0 0x80>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C0_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+ reg = <0 0x11008000 0 0xa0>, <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C1_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+ reg = <0 0x11009000 0 0xa0>, <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C2_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@1100f000 {
+ compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+ reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C3_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi: spi@1100a000 {
compatible = "mediatek,mt8365-spi", "mediatek,mt7622-spi";
reg = <0 0x1100a000 0 0x100>;
There are four I2C master channels in MT8365 with a same HW architecture. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> --- arch/arm64/boot/dts/mediatek/mt8365.dtsi | 52 ++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)