| Message ID | 20230118173932.358153-2-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/2] spi: dt-bindings: drop unneeded quotes | expand |
On Wed, Jan 18, 2023 at 6:39 PM Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > Cleanup examples: > - use 4-space indentation (for cases when it is neither 4 not 2 space), > - drop redundant blank lines, > - use lowercase hex. > > No functional impact except adjusting to preferred coding style. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > .../devicetree/bindings/spi/renesas,rspi.yaml | 22 +-- Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
On Thu, 19 Jan 2023, at 04:09, Krzysztof Kozlowski wrote: > Cleanup examples: > - use 4-space indentation (for cases when it is neither 4 not 2 space), > - drop redundant blank lines, > - use lowercase hex. > > No functional impact except adjusting to preferred coding style. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > .../bindings/spi/amlogic,meson-gx-spicc.yaml | 26 +-- > .../bindings/spi/amlogic,meson6-spifc.yaml | 22 +-- > .../bindings/spi/aspeed,ast2600-fmc.yaml | 24 +-- For the Aspeed change: Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
On 18/01/2023 18:39, Krzysztof Kozlowski wrote: > Cleanup examples: > - use 4-space indentation (for cases when it is neither 4 not 2 space), > - drop redundant blank lines, > - use lowercase hex. > > No functional impact except adjusting to preferred coding style. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > .../bindings/spi/amlogic,meson-gx-spicc.yaml | 26 +-- > .../bindings/spi/amlogic,meson6-spifc.yaml | 22 +-- For meson changes: Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> > .../bindings/spi/aspeed,ast2600-fmc.yaml | 24 +-- > .../bindings/spi/brcm,spi-bcm-qspi.yaml | 156 +++++++++--------- > .../bindings/spi/cdns,qspi-nor.yaml | 4 +- > .../bindings/spi/nvidia,tegra210-quad.yaml | 42 ++--- > .../bindings/spi/qcom,spi-qcom-qspi.yaml | 1 - > .../devicetree/bindings/spi/renesas,rspi.yaml | 22 +-- > .../bindings/spi/spi-sunplus-sp7021.yaml | 4 +- > .../devicetree/bindings/spi/st,stm32-spi.yaml | 1 - > 10 files changed, 150 insertions(+), 152 deletions(-) > > diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml > index e5eca3a6f132..4e28e6e9d8e0 100644 > --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml > +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml > @@ -100,17 +100,17 @@ unevaluatedProperties: false > examples: > - | > spi@c1108d80 { > - compatible = "amlogic,meson-gx-spicc"; > - reg = <0xc1108d80 0x80>; > - interrupts = <112>; > - clocks = <&clk81>; > - clock-names = "core"; > - #address-cells = <1>; > - #size-cells = <0>; > - > - display@0 { > - compatible = "lg,lg4573"; > - spi-max-frequency = <1000000>; > - reg = <0>; > - }; > + compatible = "amlogic,meson-gx-spicc"; > + reg = <0xc1108d80 0x80>; > + interrupts = <112>; > + clocks = <&clk81>; > + clock-names = "core"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + display@0 { > + compatible = "lg,lg4573"; > + spi-max-frequency = <1000000>; > + reg = <0>; > + }; > }; > diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml > index 806043fed4d1..8e769ccda97f 100644 > --- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml > +++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml > @@ -40,15 +40,15 @@ unevaluatedProperties: false > examples: > - | > spi@c1108c80 { > - compatible = "amlogic,meson6-spifc"; > - reg = <0xc1108c80 0x80>; > - clocks = <&clk81>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - flash: flash@0 { > - compatible = "spansion,m25p80", "jedec,spi-nor"; > - reg = <0>; > - spi-max-frequency = <40000000>; > - }; > + compatible = "amlogic,meson6-spifc"; > + reg = <0xc1108c80 0x80>; > + clocks = <&clk81>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + flash: flash@0 { > + compatible = "spansion,m25p80", "jedec,spi-nor"; > + reg = <0>; > + spi-max-frequency = <40000000>; > + }; > }; <snip>
On Wed, Jan 18, 2023 at 06:39:32PM +0100, Krzysztof Kozlowski wrote: > Cleanup examples: > - use 4-space indentation (for cases when it is neither 4 not 2 space), > - drop redundant blank lines, > - use lowercase hex. > > No functional impact except adjusting to preferred coding style. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > .../bindings/spi/amlogic,meson-gx-spicc.yaml | 26 +-- > .../bindings/spi/amlogic,meson6-spifc.yaml | 22 +-- > .../bindings/spi/aspeed,ast2600-fmc.yaml | 24 +-- > .../bindings/spi/brcm,spi-bcm-qspi.yaml | 156 +++++++++--------- > .../bindings/spi/cdns,qspi-nor.yaml | 4 +- > .../bindings/spi/nvidia,tegra210-quad.yaml | 42 ++--- > .../bindings/spi/qcom,spi-qcom-qspi.yaml | 1 - > .../devicetree/bindings/spi/renesas,rspi.yaml | 22 +-- > .../bindings/spi/spi-sunplus-sp7021.yaml | 4 +- > .../devicetree/bindings/spi/st,stm32-spi.yaml | 1 - > 10 files changed, 150 insertions(+), 152 deletions(-) [...] > diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml > index d35c6f7e2dd5..18afdaab946d 100644 > --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml > +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml > @@ -95,7 +95,6 @@ examples: > <&dmamux1 1 40 0x400 0x05>; > dma-names = "rx", "tx"; > cs-gpios = <&gpioa 11 0>; Looks like the indentation needs adjusting here. > - > }; > > ... > -- > 2.34.1 >
On 23/01/2023 21:17, Rob Herring wrote: > On Wed, Jan 18, 2023 at 06:39:32PM +0100, Krzysztof Kozlowski wrote: >> Cleanup examples: >> - use 4-space indentation (for cases when it is neither 4 not 2 space), >> - drop redundant blank lines, >> - use lowercase hex. >> >> No functional impact except adjusting to preferred coding style. >> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> --- >> .../bindings/spi/amlogic,meson-gx-spicc.yaml | 26 +-- >> .../bindings/spi/amlogic,meson6-spifc.yaml | 22 +-- >> .../bindings/spi/aspeed,ast2600-fmc.yaml | 24 +-- >> .../bindings/spi/brcm,spi-bcm-qspi.yaml | 156 +++++++++--------- >> .../bindings/spi/cdns,qspi-nor.yaml | 4 +- >> .../bindings/spi/nvidia,tegra210-quad.yaml | 42 ++--- >> .../bindings/spi/qcom,spi-qcom-qspi.yaml | 1 - >> .../devicetree/bindings/spi/renesas,rspi.yaml | 22 +-- >> .../bindings/spi/spi-sunplus-sp7021.yaml | 4 +- >> .../devicetree/bindings/spi/st,stm32-spi.yaml | 1 - >> 10 files changed, 150 insertions(+), 152 deletions(-) > > [...] > >> diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml >> index d35c6f7e2dd5..18afdaab946d 100644 >> --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml >> +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml >> @@ -95,7 +95,6 @@ examples: >> <&dmamux1 1 40 0x400 0x05>; >> dma-names = "rx", "tx"; >> cs-gpios = <&gpioa 11 0>; > > Looks like the indentation needs adjusting here. > Ack Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index e5eca3a6f132..4e28e6e9d8e0 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -100,17 +100,17 @@ unevaluatedProperties: false examples: - | spi@c1108d80 { - compatible = "amlogic,meson-gx-spicc"; - reg = <0xc1108d80 0x80>; - interrupts = <112>; - clocks = <&clk81>; - clock-names = "core"; - #address-cells = <1>; - #size-cells = <0>; - - display@0 { - compatible = "lg,lg4573"; - spi-max-frequency = <1000000>; - reg = <0>; - }; + compatible = "amlogic,meson-gx-spicc"; + reg = <0xc1108d80 0x80>; + interrupts = <112>; + clocks = <&clk81>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + + display@0 { + compatible = "lg,lg4573"; + spi-max-frequency = <1000000>; + reg = <0>; + }; }; diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml index 806043fed4d1..8e769ccda97f 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml @@ -40,15 +40,15 @@ unevaluatedProperties: false examples: - | spi@c1108c80 { - compatible = "amlogic,meson6-spifc"; - reg = <0xc1108c80 0x80>; - clocks = <&clk81>; - #address-cells = <1>; - #size-cells = <0>; - - flash: flash@0 { - compatible = "spansion,m25p80", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - }; + compatible = "amlogic,meson6-spifc"; + reg = <0xc1108c80 0x80>; + clocks = <&clk81>; + #address-cells = <1>; + #size-cells = <0>; + + flash: flash@0 { + compatible = "spansion,m25p80", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; }; diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml index aae6fb139b5b..57d932af4506 100644 --- a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml +++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml @@ -60,23 +60,23 @@ examples: interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; flash@0 { - reg = < 0 >; - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - spi-rx-bus-width = <2>; + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; }; flash@1 { - reg = < 1 >; - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - spi-rx-bus-width = <2>; + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; }; flash@2 { - reg = < 2 >; - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - spi-rx-bus-width = <2>; + reg = < 2 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; }; }; diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml index ec5873919170..28222aae3077 100644 --- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml @@ -99,98 +99,98 @@ required: examples: - | # BRCMSTB SoC: SPI Master (MSPI+BSPI) for SPI-NOR access spi@f03e3400 { - compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi"; - reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>; - reg-names = "mspi", "bspi", "cs_reg"; - interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>; - interrupt-parent = <&gic>; - interrupt-names = "mspi_done", - "mspi_halted", - "spi_lr_fullness_reached", - "spi_lr_session_aborted", - "spi_lr_impatient", - "spi_lr_session_done", - "spi_lr_overread"; - clocks = <&hif_spi>; - #address-cells = <0x1>; - #size-cells = <0x0>; - - flash@0 { - #size-cells = <0x2>; - #address-cells = <0x2>; - compatible = "m25p80"; - reg = <0x0>; - spi-max-frequency = <0x2625a00>; - spi-cpol; - spi-cpha; - }; + compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi"; + reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>; + reg-names = "mspi", "bspi", "cs_reg"; + interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>; + interrupt-parent = <&gic>; + interrupt-names = "mspi_done", + "mspi_halted", + "spi_lr_fullness_reached", + "spi_lr_session_aborted", + "spi_lr_impatient", + "spi_lr_session_done", + "spi_lr_overread"; + clocks = <&hif_spi>; + #address-cells = <0x1>; + #size-cells = <0x0>; + + flash@0 { + #size-cells = <0x2>; + #address-cells = <0x2>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <0x2625a00>; + spi-cpol; + spi-cpha; + }; }; - | # BRCMSTB SoC: MSPI master for any SPI device spi@f0416000 { - clocks = <&upg_fixed>; - compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi"; - reg = <0xf0416000 0x180>; - reg-names = "mspi"; - interrupts = <0x14>; - interrupt-parent = <&irq0_aon_intc>; - interrupt-names = "mspi_done"; - #address-cells = <1>; - #size-cells = <0>; + clocks = <&upg_fixed>; + compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi"; + reg = <0xf0416000 0x180>; + reg-names = "mspi"; + interrupts = <0x14>; + interrupt-parent = <&irq0_aon_intc>; + interrupt-names = "mspi_done"; + #address-cells = <1>; + #size-cells = <0>; }; - | # iProc SoC #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> spi@18027200 { - compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; - reg = <0x18027200 0x184>, - <0x18027000 0x124>, - <0x1811c408 0x004>, - <0x180273a0 0x01c>; - reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mspi_done", - "mspi_halted", - "spi_lr_fullness_reached", - "spi_lr_session_aborted", - "spi_lr_impatient", - "spi_lr_session_done"; - clocks = <&iprocmed>; - num-cs = <2>; - #address-cells = <1>; - #size-cells = <0>; + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; + reg = <0x18027200 0x184>, + <0x18027000 0x124>, + <0x1811c408 0x004>, + <0x180273a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mspi_done", + "mspi_halted", + "spi_lr_fullness_reached", + "spi_lr_session_aborted", + "spi_lr_impatient", + "spi_lr_session_done"; + clocks = <&iprocmed>; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; }; - | # NS2 SoC #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> spi@66470200 { - compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi"; - reg = <0x66470200 0x184>, - <0x66470000 0x124>, - <0x67017408 0x004>, - <0x664703a0 0x01c>; - reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; - interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "spi_l1_intr"; - clocks = <&iprocmed>; - num-cs = <2>; + compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi"; + reg = <0x66470200 0x184>, + <0x66470000 0x124>, + <0x67017408 0x004>, + <0x664703a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; + interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "spi_l1_intr"; + clocks = <&iprocmed>; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { #address-cells = <1>; - #size-cells = <0>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p80"; - reg = <0x0>; - spi-max-frequency = <12500000>; - spi-cpol; - spi-cpha; - }; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + spi-cpol; + spi-cpha; + }; }; diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml index 9be4e2c5d1ee..7606b5a252b6 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml @@ -117,7 +117,7 @@ examples: reset-names = "qspi", "qspi-ocp"; flash@0 { - compatible = "jedec,spi-nor"; - reg = <0x0>; + compatible = "jedec,spi-nor"; + reg = <0x0>; }; }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml index 9f78b2c06494..9ae1611175f2 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml @@ -74,25 +74,25 @@ examples: #include <dt-bindings/reset/tegra210-car.h> #include <dt-bindings/interrupt-controller/arm-gic.h> spi@70410000 { - compatible = "nvidia,tegra210-qspi"; - reg = <0x70410000 0x1000>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car TEGRA210_CLK_QSPI>, - <&tegra_car TEGRA210_CLK_QSPI_PM>; - clock-names = "qspi", "qspi_out"; - resets = <&tegra_car 211>; - dmas = <&apbdma 5>, <&apbdma 5>; - dma-names = "rx", "tx"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - spi-tx-bus-width = <2>; - spi-rx-bus-width = <2>; - nvidia,tx-clk-tap-delay = <0>; - nvidia,rx-clk-tap-delay = <0>; - }; + compatible = "nvidia,tegra210-qspi"; + reg = <0x70410000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_QSPI>, + <&tegra_car TEGRA210_CLK_QSPI_PM>; + clock-names = "qspi", "qspi_out"; + resets = <&tegra_car 211>; + dmas = <&apbdma 5>, <&apbdma 5>; + dma-names = "rx", "tx"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + nvidia,tx-clk-tap-delay = <0>; + nvidia,rx-clk-tap-delay = <0>; + }; }; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index 85e7770703bd..e94d915e28c8 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -87,7 +87,6 @@ examples: spi-tx-bus-width = <2>; spi-rx-bus-width = <2>; }; - }; }; ... diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml index f45d3b75d6de..4d8ec69214c9 100644 --- a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml @@ -141,15 +141,15 @@ examples: #include <dt-bindings/power/r8a7791-sysc.h> qspi: spi@e6b10000 { - compatible = "renesas,qspi-r8a7791", "renesas,qspi"; - reg = <0xe6b10000 0x2c>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 917>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 917>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; + compatible = "renesas,qspi-r8a7791", "renesas,qspi"; + reg = <0xe6b10000 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 917>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml index 69a463305274..edb5ba71af3a 100644 --- a/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml +++ b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml @@ -59,9 +59,9 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - spi@9C002D80 { + spi@9c002d80 { compatible = "sunplus,sp7021-spi"; - reg = <0x9C002D80 0x80>, <0x9C002E00 0x80>; + reg = <0x9c002d80 0x80>, <0x9c002e00 0x80>; reg-names = "master", "slave"; interrupt-parent = <&intc>; interrupt-names = "dma_w", diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index d35c6f7e2dd5..18afdaab946d 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -95,7 +95,6 @@ examples: <&dmamux1 1 40 0x400 0x05>; dma-names = "rx", "tx"; cs-gpios = <&gpioa 11 0>; - }; ...
Cleanup examples: - use 4-space indentation (for cases when it is neither 4 not 2 space), - drop redundant blank lines, - use lowercase hex. No functional impact except adjusting to preferred coding style. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../bindings/spi/amlogic,meson-gx-spicc.yaml | 26 +-- .../bindings/spi/amlogic,meson6-spifc.yaml | 22 +-- .../bindings/spi/aspeed,ast2600-fmc.yaml | 24 +-- .../bindings/spi/brcm,spi-bcm-qspi.yaml | 156 +++++++++--------- .../bindings/spi/cdns,qspi-nor.yaml | 4 +- .../bindings/spi/nvidia,tegra210-quad.yaml | 42 ++--- .../bindings/spi/qcom,spi-qcom-qspi.yaml | 1 - .../devicetree/bindings/spi/renesas,rspi.yaml | 22 +-- .../bindings/spi/spi-sunplus-sp7021.yaml | 4 +- .../devicetree/bindings/spi/st,stm32-spi.yaml | 1 - 10 files changed, 150 insertions(+), 152 deletions(-)