@@ -13,6 +13,16 @@
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/usb.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/kfifo.h>
+#include <linux/tty_flip.h>
+#include <linux/minmax.h>
+#include <asm-generic/unaligned.h>
+
+#define UART_COUNT_MAX 4 /* Number of UARTs this driver can handle */
+#define FIFO_SIZE 256
+#define TTY_WAKEUP_WATERMARK (FIFO_SIZE / 2)
#ifdef DEBUG
static int ft260_debug = 1;
@@ -30,6 +40,7 @@ MODULE_PARM_DESC(debug, "Toggle FT260 debugging messages");
#define FT260_REPORT_MAX_LENGTH (64)
#define FT260_I2C_DATA_REPORT_ID(len) (FT260_I2C_REPORT_MIN + (len - 1) / 4)
+#define FT260_UART_DATA_REPORT_ID(len) (FT260_UART_REPORT_MIN + (len - 1) / 4)
#define FT260_WAKEUP_NEEDED_AFTER_MS (4800) /* 5s minus 200ms margin */
@@ -81,7 +92,8 @@ enum {
FT260_UART_INTERRUPT_STATUS = 0xB1,
FT260_UART_STATUS = 0xE0,
FT260_UART_RI_DCD_STATUS = 0xE1,
- FT260_UART_REPORT = 0xF0,
+ FT260_UART_REPORT_MIN = 0xF0,
+ FT260_UART_REPORT_MAX = 0xFE,
};
/* Feature Out */
@@ -132,6 +144,13 @@ enum {
FT260_FLAG_START_STOP_REPEATED = 0x07,
};
+/* Return values for ft260_get_interface_type func */
+enum {
+ FT260_IFACE_NONE,
+ FT260_IFACE_I2C,
+ FT260_IFACE_UART
+};
+
#define FT260_SET_REQUEST_VALUE(report_id) ((FT260_FEATURE << 8) | report_id)
/* Feature In reports */
@@ -220,12 +239,59 @@ struct ft260_i2c_read_request_report {
__le16 length; /* data payload length */
} __packed;
-struct ft260_i2c_input_report {
- u8 report; /* FT260_I2C_REPORT */
+struct ft260_input_report {
+ u8 report; /* FT260_I2C_REPORT or FT260_UART_REPORT */
u8 length; /* data payload length */
u8 data[2]; /* data payload */
} __packed;
+/* UART reports */
+struct ft260_uart_write_request_report {
+ u8 report; /* FT260_UART_REPORT */
+ u8 length; /* data payload length */
+ u8 data[]; /* data payload */
+} __packed;
+
+struct ft260_configure_uart_request {
+ u8 report; /* FT260_SYSTEM_SETTINGS */
+ u8 request; /* FT260_SET_UART_CONFIG */
+ u8 flow_ctrl; /* 0: OFF, 1: RTS_CTS, 2: DTR_DSR */
+ /* 3: XON_XOFF, 4: No flow ctrl */
+ /* The baudrate field is unaligned: */
+ __le32 baudrate; /* little endian, 9600 = 0x2580, 19200 = 0x4B00 */
+ u8 data_bit; /* 7 or 8 */
+ u8 parity; /* 0: no parity, 1: odd, 2: even, 3: high, 4: low */
+ u8 stop_bit; /* 0: one stop bit, 2: 2 stop bits */
+ u8 breaking; /* 0: no break */
+} __packed;
+
+/* UART interface configuration */
+enum {
+ FT260_CFG_FLOW_CTRL_OFF = 0x00,
+ FT260_CFG_FLOW_CTRL_RTS_CTS = 0x01,
+ FT260_CFG_FLOW_CTRL_DTR_DSR = 0x02,
+ FT260_CFG_FLOW_CTRL_XON_XOFF = 0x03,
+ FT260_CFG_FLOW_CTRL_NONE = 0x04,
+
+ FT260_CFG_DATA_BITS_7 = 0x07,
+ FT260_CFG_DATA_BITS_8 = 0x08,
+
+ FT260_CFG_PAR_NO = 0x00,
+ FT260_CFG_PAR_ODD = 0x01,
+ FT260_CFG_PAR_EVEN = 0x02,
+ FT260_CFG_PAR_HIGH = 0x03,
+ FT260_CFG_PAR_LOW = 0x04,
+
+ FT260_CFG_STOP_ONE_BIT = 0x00,
+ FT260_CFG_STOP_TWO_BIT = 0x02,
+
+ FT260_CFG_BREAKING_NO = 0x00,
+ FT260_CFG_BEAKING_YES = 0x01,
+
+ FT260_CFG_BAUD_MIN = 1200,
+ FT260_CFG_BAUD_MAX = 12000000,
+};
+
static const struct hid_device_id ft260_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_FUTURE_TECHNOLOGY,
USB_DEVICE_ID_FT260) },
@@ -236,6 +302,18 @@ MODULE_DEVICE_TABLE(hid, ft260_devices);
struct ft260_device {
struct i2c_adapter adap;
struct hid_device *hdev;
+
+ int ft260_is_serial;
+ struct tty_port port;
+ unsigned int index;
+ struct kfifo xmit_fifo;
+ /* write_lock: lock to serialize access to xmit fifo */
+ spinlock_t write_lock;
+ struct uart_icount icount;
+
+ struct timer_list wakeup_timer;
+ struct work_struct wakeup_work;
+
struct completion wait;
struct mutex lock;
u8 write_buf[FT260_REPORT_MAX_LENGTH];
@@ -782,7 +860,7 @@ static int ft260_get_system_config(struct hid_device *hdev,
return 0;
}
-static int ft260_is_interface_enabled(struct hid_device *hdev)
+static int ft260_get_interface_type(struct hid_device *hdev, struct ft260_device *dev)
{
struct ft260_get_system_status_report cfg;
struct usb_interface *usbif = to_usb_interface(hdev->dev.parent);
@@ -802,18 +880,22 @@ static int ft260_is_interface_enabled(struct hid_device *hdev)
switch (cfg.chip_mode) {
case FT260_MODE_ALL:
case FT260_MODE_BOTH:
- if (interface == 1)
- hid_info(hdev, "uart interface is not supported\n");
- else
- ret = 1;
+ if (interface == 1) {
+ ret = FT260_IFACE_UART;
+ dev->ft260_is_serial = 1;
+ } else {
+ ret = FT260_IFACE_I2C;
+ }
break;
case FT260_MODE_UART:
- hid_info(hdev, "uart interface is not supported\n");
+ ret = FT260_IFACE_UART;
+ dev->ft260_is_serial = 1;
break;
case FT260_MODE_I2C:
- ret = 1;
+ ret = FT260_IFACE_I2C;
break;
}
+
return ret;
}
@@ -957,51 +1039,401 @@ static const struct attribute_group ft260_attr_group = {
}
};
-static int ft260_probe(struct hid_device *hdev, const struct hid_device_id *id)
+/***
+ * START Serial dev part
+ */
+static struct ft260_device *ft260_uart_table[UART_COUNT_MAX];
+static DEFINE_SPINLOCK(ft260_uart_table_lock);
+
+static int ft260_uart_add_port(struct ft260_device *port)
{
- struct ft260_device *dev;
- struct ft260_get_chip_version_report version;
- int ret;
+ int index, ret = -EBUSY;
- if (!hid_is_usb(hdev))
- return -EINVAL;
-
- dev = devm_kzalloc(&hdev->dev, sizeof(*dev), GFP_KERNEL);
- if (!dev)
+ spin_lock_init(&port->write_lock);
+ if (kfifo_alloc(&port->xmit_fifo, FIFO_SIZE, GFP_KERNEL))
return -ENOMEM;
- ret = hid_parse(hdev);
- if (ret) {
- hid_err(hdev, "failed to parse HID\n");
- return ret;
+ spin_lock(&ft260_uart_table_lock);
+ for (index = 0; index < UART_COUNT_MAX; index++) {
+ if (!ft260_uart_table[index]) {
+ port->index = index;
+ ft260_uart_table[index] = port;
+ ret = 0;
+ break;
+ }
}
+ spin_unlock(&ft260_uart_table_lock);
- ret = hid_hw_start(hdev, 0);
- if (ret) {
- hid_err(hdev, "failed to start HID HW\n");
- return ret;
+ return ret;
+}
+
+static void ft260_uart_port_put(struct ft260_device *port)
+{
+ tty_port_put(&port->port);
+}
+
+static void ft260_uart_port_remove(struct ft260_device *port)
+{
+ spin_lock(&ft260_uart_table_lock);
+ ft260_uart_table[port->index] = NULL;
+ spin_unlock(&ft260_uart_table_lock);
+
+ mutex_lock(&port->port.mutex);
+ /* tty_hangup is async so is this safe as is ?? */
+ tty_port_tty_hangup(&port->port, false);
+ mutex_unlock(&port->port.mutex);
+
+ ft260_uart_port_put(port);
+}
+
+static struct ft260_device *ft260_uart_port_get(unsigned int index)
+{
+ struct ft260_device *port;
+
+ if (index >= UART_COUNT_MAX)
+ return NULL;
+
+ spin_lock(&ft260_uart_table_lock);
+ port = ft260_uart_table[index];
+ if (port)
+ tty_port_get(&port->port);
+ spin_unlock(&ft260_uart_table_lock);
+
+ return port;
+}
+
+static int ft260_uart_open(struct tty_struct *tty, struct file *filp)
+{
+ int ret;
+ struct ft260_device *port = tty->driver_data;
+
+ ret = tty_port_open(&port->port, tty, filp);
+
+ return ret;
+}
+
+static void ft260_uart_close(struct tty_struct *tty, struct file *filp)
+{
+ struct ft260_device *port = tty->driver_data;
+
+ tty_port_close(&port->port, tty, filp);
+}
+
+static void ft260_uart_hangup(struct tty_struct *tty)
+{
+ struct ft260_device *port = tty->driver_data;
+
+ tty_port_hangup(&port->port);
+}
+
+static int ft260_uart_transmit_chars(struct ft260_device *port)
+{
+ struct hid_device *hdev = port->hdev;
+ struct kfifo *xmit = &port->xmit_fifo;
+ struct tty_struct *tty;
+ struct ft260_uart_write_request_report *rep;
+ int len, data_len, ret = 0;
+
+ tty = tty_port_tty_get(&port->port);
+
+ data_len = kfifo_len(xmit);
+ if (!tty || !data_len) {
+ ret = -EINVAL;
+ goto tty_out;
}
- ret = hid_hw_open(hdev);
- if (ret) {
- hid_err(hdev, "failed to open HID HW\n");
- goto err_hid_stop;
+ rep = (struct ft260_uart_write_request_report *)port->write_buf;
+
+ do {
+ len = min(data_len, FT260_WR_DATA_MAX);
+
+ rep->report = FT260_UART_DATA_REPORT_ID(len);
+ rep->length = len;
+
+ len = kfifo_out_locked(xmit, rep->data, len, &port->write_lock);
+
+ ret = ft260_hid_output_report(hdev, (u8 *)rep, len + sizeof(*rep));
+ if (ret < 0) {
+ hid_err(hdev, "Failed to start transfer, ret %d\n", ret);
+ goto tty_out;
+ }
+
+ data_len -= len;
+ port->icount.tx += len;
+ } while (data_len > 0);
+
+ len = kfifo_len(xmit);
+ if ((FIFO_SIZE - len) > TTY_WAKEUP_WATERMARK)
+ tty_wakeup(tty);
+
+ ret = 0;
+
+tty_out:
+ tty_kref_put(tty);
+ return ret;
+}
+
+static int ft260_uart_receive_chars(struct ft260_device *port,
+ u8 *data, u8 length)
+{
+ struct hid_device *hdev = port->hdev;
+ int ret = 0;
+
+ if (length > FT260_RD_DATA_MAX) {
+ hid_err(hdev, "Received too much data (%d)\n", length);
+ return -EBADR;
}
- ret = ft260_hid_feature_report_get(hdev, FT260_CHIP_VERSION,
- (u8 *)&version, sizeof(version));
+ ret = tty_insert_flip_string(&port->port, data, length);
+ if (ret != length)
+ hid_err(hdev, "%d char not inserted to flip buffer\n", length - ret);
+ port->icount.rx += ret;
+
+ if (ret)
+ tty_flip_buffer_push(&port->port);
+
+ return ret;
+}
+
+static int ft260_uart_write(struct tty_struct *tty, const unsigned char *buf,
+ int count)
+{
+ struct ft260_device *port = tty->driver_data;
+ struct hid_device *hdev = port->hdev;
+ int ret;
+
+ ret = kfifo_in_locked(&port->xmit_fifo, buf, count, &port->write_lock);
+ if (ft260_uart_transmit_chars(port) != kfifo_len(&port->xmit_fifo))
+ hid_err(hdev, "Failed sending all kfifo data bytes\n");
+
+ return ret;
+}
+
+static unsigned int ft260_uart_write_room(struct tty_struct *tty)
+{
+ struct ft260_device *port = tty->driver_data;
+
+ return FIFO_SIZE - kfifo_len(&port->xmit_fifo);
+}
+
+static unsigned int ft260_uart_chars_in_buffer(struct tty_struct *tty)
+{
+ struct ft260_device *port = tty->driver_data;
+
+ return kfifo_len(&port->xmit_fifo);
+}
+
+static int ft260_uart_change_speed(struct ft260_device *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct hid_device *hdev = port->hdev;
+ unsigned int baud;
+ struct ft260_configure_uart_request req;
+ int ret;
+
+ memset(&req, 0, sizeof(req));
+
+ req.report = FT260_SYSTEM_SETTINGS;
+ req.request = FT260_SET_UART_CONFIG;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS7:
+ req.data_bit = FT260_CFG_DATA_BITS_7;
+ break;
+ case CS5:
+ case CS6:
+ hid_err(hdev, "Invalid data bit size, setting to default (8 bit)\n");
+ req.data_bit = FT260_CFG_DATA_BITS_8;
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS8;
+ break;
+ default:
+ case CS8:
+ req.data_bit = FT260_CFG_DATA_BITS_8;
+ break;
+ }
+
+ req.stop_bit = (termios->c_cflag & CSTOPB) ?
+ FT260_CFG_STOP_TWO_BIT : FT260_CFG_STOP_ONE_BIT;
+
+ if (termios->c_cflag & PARENB) {
+ req.parity = (termios->c_cflag & PARODD) ?
+ FT260_CFG_PAR_ODD : FT260_CFG_PAR_EVEN;
+ } else {
+ req.parity = FT260_CFG_PAR_NO;
+ }
+
+ baud = tty_termios_baud_rate(termios);
+ if (baud == 0 || baud < FT260_CFG_BAUD_MIN || baud > FT260_CFG_BAUD_MAX) {
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ hid_err(hdev, "Invalid baud rate %d\n", baud);
+ baud = 9600;
+ tty_encode_baud_rate(tty, baud, baud);
+ tty_kref_put(tty);
+ }
+ put_unaligned_le32(cpu_to_le32(baud), &req.baudrate);
+
+ if (termios->c_cflag & CRTSCTS)
+ req.flow_ctrl = FT260_CFG_FLOW_CTRL_RTS_CTS;
+ else
+ req.flow_ctrl = FT260_CFG_FLOW_CTRL_OFF;
+
+ ft260_dbg("Configured termios: flow control: %d, baudrate: %d, ",
+ req.flow_ctrl, baud);
+ ft260_dbg("data_bit: %d, parity: %d, stop_bit: %d, breaking: %d\n",
+ req.data_bit, req.parity,
+ req.stop_bit, req.breaking);
+
+ req.flow_ctrl = FT260_CFG_FLOW_CTRL_NONE;
+ req.breaking = FT260_CFG_BREAKING_NO;
+
+ ret = ft260_hid_feature_report_set(hdev, (u8 *)&req, sizeof(req));
if (ret < 0) {
- hid_err(hdev, "failed to retrieve chip version\n");
- goto err_hid_close;
+ hid_err(hdev, "ft260_hid_feature_report_set failed: %d\n", ret);
}
- hid_info(hdev, "chip code: %02x%02x %02x%02x\n",
- version.chip_code[0], version.chip_code[1],
- version.chip_code[2], version.chip_code[3]);
+ return ret;
+}
- ret = ft260_is_interface_enabled(hdev);
- if (ret <= 0)
- goto err_hid_close;
+static void ft260_uart_set_termios(struct tty_struct *tty,
+ const struct ktermios *old_termios)
+{
+ struct ft260_device *port = tty->driver_data;
+
+ ft260_uart_change_speed(port, &tty->termios, NULL);
+}
+
+static int ft260_uart_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ int idx = tty->index;
+ struct ft260_device *port = ft260_uart_port_get(idx);
+ int ret = tty_standard_install(driver, tty);
+
+ if (ret == 0)
+ /* This is the ref ft260_uart_port get provided */
+ tty->driver_data = port;
+ else
+ ft260_uart_port_put(port);
+
+ return ret;
+}
+
+static void ft260_uart_cleanup(struct tty_struct *tty)
+{
+ struct ft260_device *port = tty->driver_data;
+
+ tty->driver_data = NULL; /* Bug trap */
+ ft260_uart_port_put(port);
+}
+
+static int ft260_uart_proc_show(struct seq_file *m, void *v)
+{
+ return -EINVAL;
+}
+
+static const struct tty_operations ft260_uart_ops = {
+ .open = ft260_uart_open,
+ .close = ft260_uart_close,
+ .write = ft260_uart_write,
+ .write_room = ft260_uart_write_room,
+ .chars_in_buffer = ft260_uart_chars_in_buffer,
+ .set_termios = ft260_uart_set_termios,
+ .hangup = ft260_uart_hangup,
+ .install = ft260_uart_install,
+ .cleanup = ft260_uart_cleanup,
+ .proc_show = ft260_uart_proc_show,
+};
+
+static void uart_dtr_rts(struct tty_port *tport, int onoff)
+{
+}
+
+static int uart_carrier_raised(struct tty_port *tport)
+{
+ return -EINVAL;
+}
+
+/* The FT260 has a "power saving mode" that causes the device to switch
+ * to a 30 kHz oscillator if there's no activity for 5 seconds.
+ * Unfortunately this mode can only be disabled by reprogramming
+ * internal fuses, which requires an additional programming voltage.
+ *
+ * One effect of this mode is to cause data loss on a fast UART that
+ * transmits after being idle for longer than 5 seconds. We work around
+ * this by sending a dummy report at least once per 4 seconds if the
+ * UART is in use.
+ */
+static void ft260_uart_start_wakeup(struct timer_list *t)
+{
+ struct ft260_device *dev =
+ container_of(t, struct ft260_device, wakeup_timer);
+
+ schedule_work(&dev->wakeup_work);
+ mod_timer(&dev->wakeup_timer, jiffies +
+ msecs_to_jiffies(FT260_WAKEUP_NEEDED_AFTER_MS));
+}
+
+static void ft260_uart_do_wakeup(struct work_struct *work)
+{
+ struct ft260_device *dev =
+ container_of(work, struct ft260_device, wakeup_work);
+ struct ft260_get_chip_version_report version;
+ int ret;
+
+ ret = ft260_hid_feature_report_get(dev->hdev, FT260_CHIP_VERSION,
+ (u8 *)&version, sizeof(version));
+ if (ret < 0)
+ hid_err(dev->hdev,
+ "%s: failed to start transfer, ret %d\n",
+ __func__, ret);
+}
+
+static void ft260_uart_shutdown(struct tty_port *tport)
+{
+ struct ft260_device *port =
+ container_of(tport, struct ft260_device, port);
+
+ del_timer_sync(&port->wakeup_timer);
+}
+
+static int ft260_uart_activate(struct tty_port *tport, struct tty_struct *tty)
+{
+ struct ft260_device *port =
+ container_of(tport, struct ft260_device, port);
+
+ /*
+ * Set the TTY IO error marker - we will only clear this
+ * once we have successfully opened the port.
+ */
+ set_bit(TTY_IO_ERROR, &tty->flags);
+ kfifo_reset(&port->xmit_fifo);
+ ft260_uart_change_speed(port, &tty->termios, NULL);
+ clear_bit(TTY_IO_ERROR, &tty->flags);
+
+ mod_timer(&port->wakeup_timer, jiffies +
+ msecs_to_jiffies(FT260_WAKEUP_NEEDED_AFTER_MS));
+
+ return 0;
+}
+
+static void ft260_uart_port_destroy(struct tty_port *tport)
+{
+}
+
+static const struct tty_port_operations ft260_uart_port_ops = {
+ .dtr_rts = uart_dtr_rts,
+ .carrier_raised = uart_carrier_raised,
+ .shutdown = ft260_uart_shutdown,
+ .activate = ft260_uart_activate,
+ .destruct = ft260_uart_port_destroy,
+};
+
+static struct tty_driver *ft260_tty_driver;
+
+static int ft260_i2c_probe(struct hid_device *hdev, struct ft260_device *dev)
+{
+ int ret;
hid_info(hdev, "USB HID v%x.%02x Device [%s] on %s\n",
hdev->version >> 8, hdev->version & 0xff, hdev->name,
@@ -1028,7 +1460,7 @@ static int ft260_probe(struct hid_device *hdev, const struct hid_device_id *id)
ret = i2c_add_adapter(&dev->adap);
if (ret) {
hid_err(hdev, "failed to add i2c adapter\n");
- goto err_hid_close;
+ return ret;
}
ret = sysfs_create_group(&hdev->dev.kobj, &ft260_attr_group);
@@ -1036,11 +1468,132 @@ static int ft260_probe(struct hid_device *hdev, const struct hid_device_id *id)
hid_err(hdev, "failed to create sysfs attrs\n");
goto err_i2c_free;
}
-
return 0;
err_i2c_free:
i2c_del_adapter(&dev->adap);
+ return ret;
+}
+
+static int ft260_uart_probe(struct hid_device *hdev, struct ft260_device *dev)
+{
+ struct ft260_configure_uart_request req;
+ int ret;
+ struct device *devt;
+
+ INIT_WORK(&dev->wakeup_work, ft260_uart_do_wakeup);
+ timer_setup(&dev->wakeup_timer, ft260_uart_start_wakeup, 0);
+
+ tty_port_init(&dev->port);
+ dev->port.ops = &ft260_uart_port_ops;
+
+ ret = ft260_uart_add_port(dev);
+ if (ret) {
+ hid_err(hdev, "failed to add port\n");
+ return ret;
+ }
+ devt = tty_port_register_device_attr(&dev->port,
+ ft260_tty_driver,
+ dev->index, &hdev->dev,
+ dev, NULL);
+ if (IS_ERR(devt)) {
+ hid_err(hdev, "failed to register tty port\n");
+ ret = PTR_ERR(devt);
+ goto err_register_tty;
+ }
+ hid_info(hdev, "Registering device /dev/%s%d\n",
+ ft260_tty_driver->name, dev->index);
+
+ /* Send Feature Report to Configure FT260 as UART 9600-8-N-1 */
+ req.report = FT260_SYSTEM_SETTINGS;
+ req.request = FT260_SET_UART_CONFIG;
+ req.flow_ctrl = FT260_CFG_FLOW_CTRL_NONE;
+ put_unaligned_le32(cpu_to_le32(9600), &req.baudrate);
+ req.data_bit = FT260_CFG_DATA_BITS_8;
+ req.parity = FT260_CFG_PAR_NO;
+ req.stop_bit = FT260_CFG_STOP_ONE_BIT;
+ req.breaking = FT260_CFG_BREAKING_NO;
+
+ ret = ft260_hid_feature_report_set(hdev, (u8 *)&req, sizeof(req));
+ if (ret < 0) {
+ hid_err(hdev, "ft260_hid_feature_report_set failed: %d\n",
+ ret);
+ goto err_hid_report;
+ }
+
+ return 0;
+
+err_hid_report:
+ tty_port_unregister_device(&dev->port, ft260_tty_driver, dev->index);
+err_register_tty:
+ ft260_uart_port_remove(dev);
+ return ret;
+}
+
+static int ft260_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ struct ft260_device *dev;
+ struct ft260_get_chip_version_report version;
+ int ret;
+
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
+ dev = devm_kzalloc(&hdev->dev, sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "failed to parse HID\n");
+ return ret;
+ }
+
+ ret = hid_hw_start(hdev, 0);
+ if (ret) {
+ hid_err(hdev, "failed to start HID HW\n");
+ return ret;
+ }
+
+ ret = hid_hw_open(hdev);
+ if (ret) {
+ hid_err(hdev, "failed to open HID HW\n");
+ goto err_hid_stop;
+ }
+
+ ret = ft260_hid_feature_report_get(hdev, FT260_CHIP_VERSION,
+ (u8 *)&version, sizeof(version));
+ if (ret < 0) {
+ hid_err(hdev, "failed to retrieve chip version\n");
+ goto err_hid_close;
+ }
+
+ hid_info(hdev, "chip code: %02x%02x %02x%02x\n",
+ version.chip_code[0], version.chip_code[1],
+ version.chip_code[2], version.chip_code[3]);
+
+ ret = ft260_get_interface_type(hdev, dev);
+ if (ret <= FT260_IFACE_NONE)
+ goto err_hid_close;
+
+ hid_set_drvdata(hdev, dev);
+ dev->hdev = hdev;
+
+ mutex_init(&dev->lock);
+ init_completion(&dev->wait);
+
+ if (!dev->ft260_is_serial) {
+ ret = ft260_i2c_probe(hdev, dev);
+ if (ret)
+ goto err_hid_close;
+ } else {
+ ret = ft260_uart_probe(hdev, dev);
+ if (ret)
+ goto err_hid_close;
+ }
+
+ return 0;
+
err_hid_close:
hid_hw_close(hdev);
err_hid_stop:
@@ -1055,8 +1608,15 @@ static void ft260_remove(struct hid_device *hdev)
if (!dev)
return;
- sysfs_remove_group(&hdev->dev.kobj, &ft260_attr_group);
- i2c_del_adapter(&dev->adap);
+ if (dev->ft260_is_serial) {
+ tty_port_unregister_device(&dev->port, ft260_tty_driver,
+ dev->index);
+ ft260_uart_port_remove(dev);
+ cancel_work_sync(&dev->wakeup_work);
+ } else {
+ sysfs_remove_group(&hdev->dev.kobj, &ft260_attr_group);
+ i2c_del_adapter(&dev->adap);
+ }
hid_hw_close(hdev);
hid_hw_stop(hdev);
@@ -1066,7 +1626,7 @@ static int ft260_raw_event(struct hid_device *hdev, struct hid_report *report,
u8 *data, int size)
{
struct ft260_device *dev = hid_get_drvdata(hdev);
- struct ft260_i2c_input_report *xfer = (void *)data;
+ struct ft260_input_report *xfer = (void *)data;
if (xfer->report >= FT260_I2C_REPORT_MIN &&
xfer->report <= FT260_I2C_REPORT_MAX) {
@@ -1087,9 +1647,16 @@ static int ft260_raw_event(struct hid_device *hdev, struct hid_report *report,
if (dev->read_idx == dev->read_len)
complete(&dev->wait);
+ } else if (xfer->length > FT260_RD_DATA_MAX) {
+ hid_err(hdev, "Received data too long (%d)\n", xfer->length);
+ return -EBADR;
+ } else if (xfer->report >= FT260_UART_REPORT_MIN &&
+ xfer->report <= FT260_UART_REPORT_MAX) {
+ return ft260_uart_receive_chars(dev, xfer->data, xfer->length);
} else {
hid_err(hdev, "unhandled report %#02x\n", xfer->report);
}
+
return 0;
}
@@ -1101,7 +1668,62 @@ static struct hid_driver ft260_driver = {
.raw_event = ft260_raw_event,
};
-module_hid_driver(ft260_driver);
-MODULE_DESCRIPTION("FTDI FT260 USB HID to I2C host bridge");
+static int __init ft260_driver_init(void)
+{
+ int ret;
+
+ ft260_tty_driver = tty_alloc_driver(UART_COUNT_MAX,
+ TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV);
+ if (IS_ERR(ft260_tty_driver)) {
+ pr_err("tty_alloc_driver failed: %d\n",
+ (int)PTR_ERR(ft260_tty_driver));
+ return PTR_ERR(ft260_tty_driver);
+ }
+
+ ft260_tty_driver->driver_name = "ft260_ser";
+ ft260_tty_driver->name = "ttyFT";
+ ft260_tty_driver->major = 0;
+ ft260_tty_driver->minor_start = 0;
+ ft260_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ ft260_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+ ft260_tty_driver->init_termios = tty_std_termios;
+ ft260_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ ft260_tty_driver->init_termios.c_ispeed = 9600;
+ ft260_tty_driver->init_termios.c_ospeed = 9600;
+ tty_set_operations(ft260_tty_driver, &ft260_uart_ops);
+
+ ret = tty_register_driver(ft260_tty_driver);
+ if (ret) {
+ pr_err("tty_register_driver failed: %d\n", ret);
+ goto err_reg_driver;
+ }
+
+ ret = hid_register_driver(&(ft260_driver));
+ if (ret) {
+ pr_err("hid_register_driver failed: %d\n", ret);
+ goto err_reg_hid;
+ }
+
+ return 0;
+
+err_reg_hid:
+ tty_unregister_driver(ft260_tty_driver);
+err_reg_driver:
+ tty_driver_kref_put(ft260_tty_driver);
+
+ return ret;
+}
+
+static void __exit ft260_driver_exit(void)
+{
+ hid_unregister_driver(&(ft260_driver));
+ tty_unregister_driver(ft260_tty_driver);
+ tty_driver_kref_put(ft260_tty_driver);
+}
+
+module_init(ft260_driver_init);
+module_exit(ft260_driver_exit);
+
+MODULE_DESCRIPTION("FTDI FT260 USB HID to I2C host bridge and TTY driver");
MODULE_AUTHOR("Michael Zaidman <michael.zaidman@gmail.com>");
MODULE_LICENSE("GPL v2");