@@ -602,7 +602,7 @@
#define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22 0x234 0x49C 0x000 0x5 0x0
#define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24 0x234 0x49C 0x000 0x7 0x0
#define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x238 0x4A0 0x000 0x0 0x0
-#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x1
#define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x238 0x4A0 0x000 0x1 0x0
#define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23 0x238 0x4A0 0x000 0x5 0x0
#define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25 0x238 0x4A0 0x000 0x7 0x0
According section 8.2.5.313 Select Input Register (IOMUXC_UART1_RXD_SELECT_INPUT) of i.MX 8M Mini Applications Processor Reference Manual, Rev. 3, 11/2020 the required setting for this specific pin configuration is "1" Signed-off-by: Pierluigi Passaro <pierluigi.p@variscite.com> --- arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)