diff mbox series

[v5,1/2] ARM: dts: add GXP Support for fans and SPI

Message ID 20230113160651.51201-2-nick.hawkins@hpe.com
State New
Headers show
Series [v5,1/2] ARM: dts: add GXP Support for fans and SPI | expand

Commit Message

Hawkins, Nick Jan. 13, 2023, 4:06 p.m. UTC
From: Nick Hawkins <nick.hawkins@hpe.com>

Reorganize the base address of AHB to accommodate the SPI and fan driver
register requirements. Add the hpe,gxp-spifi and hpe,gxp-fan-ctrl
compatibles. Add comments to make the register range more clear.

Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>

---
v5:
 *Fix ranges
 *Remove comments
v4:
 *No change
v3:
 *No change
v2:
 *Changed fn2reg to fn2
 *Changed plreg to pl
 *Changed fanctrl to fan-controller
 *Adjusted base register range to elminate need for defines in code
---
 arch/arm/boot/dts/hpe-bmc-dl360gen10.dts | 58 +++++++++++++++++++++
 arch/arm/boot/dts/hpe-gxp.dtsi           | 64 +++++++++++++++++-------
 2 files changed, 103 insertions(+), 19 deletions(-)

Comments

Hawkins, Nick Jan. 26, 2023, 6:47 p.m. UTC | #1
> > @@ -52,76 +52,102 @@
> > cache-level = <2>;
> > };
> > 
> > - ahb@c0000000 {
> > + ahb@80000000 {
> > compatible = "simple-bus";
> address-cells = <1>;
> > #size-cells = <1>;
> > - ranges = <0x0 0xc0000000 0x30000000>;
> > + ranges = <0x0 0x80000000 0xf000000>,
> > + <0x40000000 0xc0000000 0x40000000>;


> In the changelog text for the first patch that moves the
> ranges down, it would make sense to describe why this specific
> move is done. "to accommodate the SPI and fan driver
> register requirements" does not actually tell me why it was
> first thought that the bus starts at 0xc0000000 but now starts
> at 0x80000000 and has a weird hole.


> Please explain how you determined the location of the hole and
> the 0x80000000 offset. Are these from the datasheet, from
> the hardware design or did you make them up because you thought
> this is what I want?

Greetings Arnd,

These are from a specification; I was mapping all the
registers that were not host related, but we need to
include those now.

The AHB section of registers indeed does start at
0x80000000. The layout of AHB is as follows:

0x80000000 - 0xa0000000 are host registers

Then there is a section of registers we do not currently want to
access as it is reserved which is mapped from:

0xa0000000 - 0xc0000000

Then we have more registers ranging from
0xc0000000 - 0xffff0000 that we will be accessing.

Hence, I believe the proper ranges for this would be:

ranges = <0x0 0x80000000 0x20000000
             0x40000000 0xc0000000 0x3fff0000>;

/* 0x80000000 - 0xa0000000 and 0xc0000000 - 0xffff0000 */

> > dma-ranges;

> Having a 1:1 translation for DMA addresses is actually an indication
> that the MMIO addresses on the bus might also be directly
> mapped, rather than offset: If AHB addresses 0x0-0x80000000
> refer to the local MMIO registers, there is no more room
> for addressing RAM in the same addresses.

I believe that this property should no longer be present here.

DMA is in the area before 0x80000000.

Thanks,

-Nick Hawkins
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
index 3a7382ce40ef..d49dcef95c5c 100644
--- a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
+++ b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
@@ -24,3 +24,61 @@ 
 		reg = <0x40000000 0x20000000>;
 	};
 };
+
+&spifi {
+	status = "okay";
+	flash@0 {
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot@0 {
+				label = "u-boot";
+				reg = <0x0 0x60000>;
+			};
+
+			u-boot-env@60000 {
+				label = "u-boot-env";
+				reg = <0x60000 0x20000>;
+			};
+
+			kernel@80000 {
+				label = "kernel";
+				reg = <0x80000 0x4c0000>;
+			};
+
+			rofs@540000 {
+				label = "rofs";
+				reg = <0x540000 0x1740000>;
+			};
+
+			rwfs@1c80000 {
+				label = "rwfs";
+				reg = <0x1c80000 0x250000>;
+			};
+
+			section@1ed0000{
+				label = "section";
+				reg = <0x1ed0000 0x130000>;
+			};
+		};
+	};
+	flash@1 {
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			host-prime@0 {
+				label = "host-prime";
+				reg = <0x0 0x02000000>;
+			};
+
+			host-second@2000000 {
+				label = "host-second";
+				reg = <0x02000000 0x02000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi
index cf735b3c4f35..4d195d466087 100644
--- a/arch/arm/boot/dts/hpe-gxp.dtsi
+++ b/arch/arm/boot/dts/hpe-gxp.dtsi
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree file for HPE GXP
+ * Device Tree for HPE
  */
 
 /dts-v1/;
@@ -52,76 +52,102 @@ 
 			cache-level = <2>;
 		};
 
-		ahb@c0000000 {
+		ahb@80000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x0 0xc0000000 0x30000000>;
+			ranges = <0x0 0x80000000 0xf000000>,
+				<0x40000000 0xc0000000 0x40000000>;
 			dma-ranges;
 
-			vic0: interrupt-controller@eff0000 {
+			spifi: spi@40000200 {
+				compatible = "hpe,gxp-spifi";
+				reg = <0x40000200 0x80>, <0x4000c000 0x100>, <0x78000000 0x7ff0000>;
+				interrupts = <20>;
+				interrupt-parent = <&vic0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+				flash@0 {
+					reg = <0>;
+					compatible = "jedec,spi-nor";
+				};
+
+				flash@1 {
+					reg = <1>;
+					compatible = "jedec,spi-nor";
+				};
+			};
+
+			vic0: interrupt-controller@4eff0000 {
 				compatible = "arm,pl192-vic";
-				reg = <0xeff0000 0x1000>;
+				reg = <0x4eff0000 0x1000>;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
 
-			vic1: interrupt-controller@80f00000 {
+			vic1: interrupt-controller@f00000 {
 				compatible = "arm,pl192-vic";
-				reg = <0x80f00000 0x1000>;
+				reg = <0xf00000 0x1000>;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
 
-			uarta: serial@e0 {
+			uarta: serial@400000e0 {
 				compatible = "ns16550a";
-				reg = <0xe0 0x8>;
+				reg = <0x400000e0 0x8>;
 				interrupts = <17>;
 				interrupt-parent = <&vic0>;
 				clock-frequency = <1846153>;
 				reg-shift = <0>;
 			};
 
-			uartb: serial@e8 {
+			uartb: serial@400000e8 {
 				compatible = "ns16550a";
-				reg = <0xe8 0x8>;
+				reg = <0x400000e8 0x8>;
 				interrupts = <18>;
 				interrupt-parent = <&vic0>;
 				clock-frequency = <1846153>;
 				reg-shift = <0>;
 			};
 
-			uartc: serial@f0 {
+			uartc: serial@400000f0 {
 				compatible = "ns16550a";
-				reg = <0xf0 0x8>;
+				reg = <0x400000f0 0x8>;
 				interrupts = <19>;
 				interrupt-parent = <&vic0>;
 				clock-frequency = <1846153>;
 				reg-shift = <0>;
 			};
 
-			usb0: usb@efe0000 {
+			usb0: usb@4efe0000 {
 				compatible = "hpe,gxp-ehci", "generic-ehci";
-				reg = <0xefe0000 0x100>;
+				reg = <0x4efe0000 0x100>;
 				interrupts = <7>;
 				interrupt-parent = <&vic0>;
 			};
 
-			st: timer@80 {
+			st: timer@40000080 {
 				compatible = "hpe,gxp-timer";
-				reg = <0x80 0x16>;
+				reg = <0x40000080 0x16>;
 				interrupts = <0>;
 				interrupt-parent = <&vic0>;
 				clocks = <&iopclk>;
 				clock-names = "iop";
 			};
 
-			usb1: usb@efe0100 {
+			usb1: usb@4efe0100 {
 				compatible = "hpe,gxp-ohci", "generic-ohci";
-				reg = <0xefe0100 0x110>;
+				reg = <0x4efe0100 0x110>;
 				interrupts = <6>;
 				interrupt-parent = <&vic0>;
 			};
+
+			fan-controller@40000c10 {
+				compatible = "hpe,gxp-fan-ctrl";
+				reg = <0x40000c10 0x8>, <0x51000027 0x06>, <0x200070 0x04>;
+				reg-names = "base", "pl", "fn2";
+			};
 		};
 	};
 };