new file mode 100644
@@ -0,0 +1,17 @@
+What: /sys/devices/platform/.../wiegand-gpio-attributes/format
+Date: January 2023
+Contact: Martin Zaťovič <m.zatovic1@gmail.com>
+Description:
+ Read/set Wiegand communication format.
+ 0 - custom format, payload length is specified by
+ payload_len file
+ 26 - 26-bit format (24 bit payload, 2 bits checksum)
+ 36 - 36-bit format (34 bit payload, 2 bits checksum)
+ 37 - 37-bit format (35 bit payload, 2 bits checksum)
+
+What: /sys/devices/platform/.../wiegand-gpio-attributes/payload_len
+Date: January 2023
+Contact: Martin Zaťovič <m.zatovic1@gmail.com>
+Description:
+ Read/set Wiegand communication payload length. File is only
+ writable if custom format is set.
@@ -22431,8 +22431,10 @@ F: drivers/hid/hid-wiimote*
WIEGAND BUS DRIVER
M: Martin Zaťovič <m.zatovic1@gmail.com>
S: Maintained
+F: Documentation/ABI/testing/sysfs-driver-wiegand-gpio
F: Documentation/devicetree/bindings/wiegand/wiegand-controller.yaml
F: drivers/bus/wiegand.c
+F: drivers/wiegand/wiegand-gpio.c
F: include/linux/wiegand.h
WILOCITY WIL6210 WIRELESS DRIVER
@@ -67,6 +67,8 @@ source "drivers/spi/Kconfig"
source "drivers/spmi/Kconfig"
+source "drivers/wiegand/Kconfig"
+
source "drivers/hsi/Kconfig"
source "drivers/pps/Kconfig"
new file mode 100644
@@ -0,0 +1,8 @@
+if WIEGAND
+
+config WIEGAND_GPIO
+ tristate "GPIO-based wiegand master (write only)"
+ help
+ This driver uses GPIO pins to send wiegand data.
+
+endif # WIEGAND
new file mode 100644
@@ -0,0 +1 @@
+obj-$(CONFIG_WIEGAND_GPIO) += wiegand-gpio.o
new file mode 100644
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/miscdevice.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/wiegand.h>
+
+#define WIEGAND_MAX_PAYLEN_BYTES 256
+
+struct wiegand_gpio {
+ struct device *dev;
+ struct wiegand_controller *ctlr;
+ struct miscdevice misc_dev;
+ struct mutex mutex;
+ struct gpio_desc *gpio_data_hi;
+ struct gpio_desc *gpio_data_lo;
+ struct file_operations fops;
+ u8 data[WIEGAND_MAX_PAYLEN_BYTES];
+};
+
+struct wiegand_gpio_instance {
+ struct wiegand_gpio *dev;
+ unsigned long flags;
+};
+
+static ssize_t store_ulong(u32 *val, const char *buf,
+ size_t size, unsigned long max)
+{
+ int rc;
+ u32 new;
+
+ rc = kstrtou32(buf, 0, &new);
+ if (rc)
+ return rc;
+
+ if (max != 0 && new > max)
+ return -EINVAL;
+
+ *val = new;
+ return size;
+}
+
+ssize_t format_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct wiegand_gpio *wiegand_gpio = (struct wiegand_gpio *)
+ dev->driver_data;
+ struct wiegand_controller *ctlr = wiegand_gpio->ctlr;
+
+ return sysfs_emit(buf, "%u\n", ctlr->format);
+}
+
+/*
+ * To set a particular format, the number of bits the driver is supposed to
+ * transmit is written to the format sysfs file. For standard formats, the
+ * allowed inputs are 26, 36 and 37. To set a custom format, 0 is passed.
+ */
+ssize_t format_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rc;
+ unsigned long new;
+ struct wiegand_gpio *wiegand_gpio = (struct wiegand_gpio *)
+ dev->driver_data;
+ struct wiegand_controller *ctlr = wiegand_gpio->ctlr;
+
+ rc = kstrtoul(buf, 0, &new);
+ if (rc)
+ return rc;
+
+ switch (new) {
+ case 0:
+ ctlr->format = WIEGAND_CUSTOM;
+ break;
+ case 26:
+ ctlr->format = WIEGAND_V26;
+ ctlr->payload_len = WIEGAND_V26_PAYLEN;
+ break;
+ case 36:
+ ctlr->format = WIEGAND_V36;
+ ctlr->payload_len = WIEGAND_V36_PAYLEN;
+ break;
+ case 37:
+ ctlr->format = WIEGAND_V37;
+ ctlr->payload_len = WIEGAND_V37_PAYLEN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+/*
+ * Using a custom format, the payload_len sysfs file configures the size of
+ * messages payload in bits. When one of the standard formats is used, this
+ * file is read-only and contains the size of the message in bits without the
+ * parity bits.
+ */
+ssize_t payload_len_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wiegand_gpio *wiegand_gpio = (struct wiegand_gpio *)
+ dev->driver_data;
+ struct wiegand_controller *ctlr = wiegand_gpio->ctlr;
+
+ return sysfs_emit(buf, "%u\n", ctlr->payload_len);
+}
+
+ssize_t payload_len_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct wiegand_gpio *wiegand_gpio = (struct wiegand_gpio *)
+ dev->driver_data;
+ struct wiegand_controller *ctlr = wiegand_gpio->ctlr;
+
+ /* standard formats use fixed payload size */
+ if (ctlr->format != WIEGAND_CUSTOM)
+ return -EPERM;
+
+ return store_ulong(&(ctlr->payload_len), buf, count,
+ WIEGAND_MAX_PAYLEN_BYTES * 8);
+}
+
+DEVICE_ATTR_RW(format);
+DEVICE_ATTR_RW(payload_len);
+
+static struct attribute *wiegand_attrs[] = {
+ &dev_attr_format.attr,
+ &dev_attr_payload_len.attr,
+ NULL,
+};
+
+static struct attribute_group wiegand_group = {
+ .name = "wiegand-gpio-attributes",
+ .attrs = wiegand_attrs,
+};
+
+/*
+ * To send a bit of value 1 following the wiegand protocol, one must set
+ * the wiegand_data_hi to low for the duration of pulse. Similarly to send
+ * a bit of value 0, the wiegand_data_lo is set to low for pulse duration.
+ * This way the two lines are never low at the same time.
+ */
+void wiegand_gpio_send_bit(struct wiegand_gpio *wiegand_gpio,
+ bool value, bool last)
+{
+ u32 pulse_len = wiegand_gpio->ctlr->pulse_len;
+ u32 interval_len = wiegand_gpio->ctlr->interval_len;
+ u32 frame_gap = wiegand_gpio->ctlr->frame_gap;
+ struct gpio_desc *gpio = value ? wiegand_gpio->gpio_data_hi
+ : wiegand_gpio->gpio_data_lo;
+
+ gpiod_set_value_cansleep(gpio, 0);
+ udelay(pulse_len);
+ gpiod_set_value_cansleep(gpio, 1);
+
+ if (last)
+ udelay(frame_gap - pulse_len);
+ else
+ udelay(interval_len - pulse_len);
+}
+
+/* This function is used for writing from file in dev directory */
+static int wiegand_gpio_write_by_bits(struct wiegand_gpio *wiegand_gpio)
+{
+ size_t i, bitlen;
+ bool bit_value, is_last_bit;
+ enum wiegand_format format = wiegand_gpio->ctlr->format;
+ u32 payload_len = wiegand_gpio->ctlr->payload_len;
+
+ bitlen = format ? payload_len + 2 : payload_len;
+
+ for (i = 0; i < bitlen; i++) {
+ bit_value = ((wiegand_gpio->data[i / 8] >> (7 - (i % 8)))
+ & 0x01);
+ is_last_bit = (i + 1) == bitlen;
+
+ wiegand_gpio_send_bit(wiegand_gpio, bit_value,
+ is_last_bit);
+ }
+
+ return 0;
+}
+
+static unsigned int wiegand_gpio_calc_bytes(unsigned int bits)
+{
+ if (bits % 8 != 0)
+ return (bits / 8) + 1;
+ else
+ return bits / 8;
+}
+
+static unsigned int wiegand_gpio_get_payload_size(
+ unsigned long payload_len_bits,
+ enum wiegand_format fmt)
+{
+ unsigned int rc;
+
+ if (fmt == WIEGAND_CUSTOM)
+ rc = wiegand_gpio_calc_bytes(payload_len_bits);
+ else
+ /* add 2 for parity bits */
+ rc = wiegand_gpio_calc_bytes(payload_len_bits + 2);
+
+ return rc;
+}
+
+static ssize_t wiegand_gpio_get_user_data(
+ struct wiegand_gpio *wiegand_gpio,
+ char __user const *buf, size_t len)
+{
+ size_t rc;
+ size_t num_copy;
+ unsigned char tmp[WIEGAND_MAX_PAYLEN_BYTES];
+ enum wiegand_format format = wiegand_gpio->ctlr->format;
+ u32 payload_len = wiegand_gpio->ctlr->payload_len;
+
+ if (len > WIEGAND_MAX_PAYLEN_BYTES)
+ return -EBADMSG;
+
+ num_copy = wiegand_gpio_get_payload_size(payload_len, format);
+
+ if (format == WIEGAND_CUSTOM) {
+ rc = copy_from_user(&wiegand_gpio->data[0], buf, num_copy);
+ if (rc < 0)
+ return rc;
+ } else {
+ rc = copy_from_user(tmp, buf, num_copy);
+ if (rc < 0)
+ return rc;
+ wiegand_add_parity_to_data(tmp, wiegand_gpio->data, format);
+ }
+ return num_copy;
+}
+
+static int wiegand_gpio_frelease(struct inode *ino, struct file *filp)
+{
+ struct wiegand_gpio_instance *info = filp->private_data;
+ struct wiegand_gpio *wiegand_gpio = info->dev;
+
+ mutex_lock(&wiegand_gpio->mutex);
+ info->flags = 0;
+ mutex_unlock(&wiegand_gpio->mutex);
+
+ kfree(info);
+
+ return 0;
+}
+
+static ssize_t wiegand_gpio_fwrite(struct file *filp,
+ char __user const *buf, size_t len, loff_t *offset)
+{
+ struct wiegand_gpio_instance *info = filp->private_data;
+ struct wiegand_gpio *wiegand_gpio = info->dev;
+ u32 payload_len = wiegand_gpio->ctlr->payload_len;
+ int rc;
+
+ if (len * 8 < payload_len)
+ return -EBADMSG;
+ if (buf == NULL || len == 0)
+ return -EINVAL;
+
+ rc = wiegand_gpio_get_user_data(wiegand_gpio, buf, len);
+ if (rc < 0)
+ return rc;
+
+ wiegand_gpio_write_by_bits(wiegand_gpio);
+
+ return len;
+}
+
+static int wiegand_gpio_fopen(struct inode *ino, struct file *filp)
+{
+ int rc;
+ struct wiegand_gpio_instance *info;
+ struct wiegand_gpio *wiegand_gpio = container_of(filp->f_op,
+ struct wiegand_gpio,
+ fops);
+ mutex_lock(&wiegand_gpio->mutex);
+ if ((filp->f_flags & O_ACCMODE) == O_RDONLY ||
+ (filp->f_flags & O_ACCMODE) == O_RDWR) {
+ dev_err(wiegand_gpio->dev, "Device is write only\n");
+ rc = -EIO;
+ goto err;
+ }
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ info->dev = wiegand_gpio;
+ info->flags = filp->f_flags;
+ mutex_unlock(&wiegand_gpio->mutex);
+
+ filp->private_data = info;
+
+ return 0;
+err:
+ mutex_unlock(&wiegand_gpio->mutex);
+ return rc;
+}
+
+size_t get_bytelength(u8 bitlength)
+{
+ size_t bytelength = bitlength / 8;
+
+ if (bitlength % 8)
+ bytelength++;
+ return bytelength;
+}
+
+/* This function is used by device drivers */
+int wiegand_gpio_transfer_message(struct wiegand_device *dev, u8 *message)
+{
+ struct wiegand_controller *ctlr = dev->controller;
+ struct wiegand_gpio *wiegand_gpio =
+ wiegand_master_get_devdata(ctlr);
+ u8 message_bytelength;
+
+ if (ctlr->format) { /* if format is not set to custom */
+ if (ctlr->format == WIEGAND_V26)
+ message_bytelength = 4; /* 4 bytes for 26-bit format */
+ else
+ message_bytelength = 5; /* 5 bytes for 36 and 37-bit */
+ } else {
+ message_bytelength = get_bytelength(ctlr->payload_len);
+ }
+
+ if (ctlr->format == WIEGAND_CUSTOM)
+ memcpy(wiegand_gpio->data, message, message_bytelength);
+ else
+ wiegand_add_parity_to_data(message, wiegand_gpio->data,
+ dev->controller->format);
+
+ wiegand_gpio_write_by_bits(wiegand_gpio);
+
+ return 0;
+}
+
+static int wiegand_gpio_request(struct device *dev,
+ struct wiegand_gpio *wiegand_gpio)
+{
+ /* Get GPIO lines using device tree bindings. */
+ wiegand_gpio->gpio_data_lo = devm_gpiod_get(dev, "data-lo",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(wiegand_gpio->gpio_data_lo))
+ return PTR_ERR(wiegand_gpio->gpio_data_lo);
+
+ wiegand_gpio->gpio_data_hi = devm_gpiod_get(dev, "data-hi",
+ GPIOD_OUT_HIGH);
+ return PTR_ERR_OR_ZERO(wiegand_gpio->gpio_data_hi);
+}
+
+static int wiegand_gpio_probe(struct platform_device *device)
+{
+ int status;
+ struct wiegand_controller *master;
+ struct wiegand_gpio *wiegand_gpio;
+ struct device *dev = &device->dev;
+
+ master = devm_wiegand_alloc_master(dev, sizeof(*wiegand_gpio));
+ if (!master)
+ return -ENOMEM;
+
+ if (dev->of_node)
+ master->dev.of_node = device->dev.of_node;
+
+ if (status)
+ return status;
+
+ master->transfer_message = &wiegand_gpio_transfer_message;
+
+ wiegand_gpio = wiegand_master_get_devdata(master);
+ wiegand_gpio->ctlr = master;
+ wiegand_gpio->fops.owner = THIS_MODULE;
+ wiegand_gpio->fops.open = wiegand_gpio_fopen;
+ wiegand_gpio->fops.release = wiegand_gpio_frelease;
+ wiegand_gpio->fops.write = wiegand_gpio_fwrite;
+
+ platform_set_drvdata(device, wiegand_gpio);
+
+ master->bus_num = device->id;
+ wiegand_gpio->dev = dev;
+
+ mutex_init(&wiegand_gpio->mutex);
+
+ status = wiegand_gpio_request(dev, wiegand_gpio);
+ if (status) {
+ dev_err(wiegand_gpio->dev, "failed at requesting GPIOs\n");
+ return status;
+ }
+
+ status = gpiod_direction_output(wiegand_gpio->gpio_data_hi, 1);
+ status |= gpiod_direction_output(wiegand_gpio->gpio_data_lo, 1);
+ if (status) {
+ dev_err(wiegand_gpio->dev, "failed to set GPIOs direction\n");
+ return status;
+ }
+
+ status = sysfs_create_group(&wiegand_gpio->dev->kobj, &wiegand_group);
+ if (status < 0) {
+ dev_err(wiegand_gpio->dev, "couldn't register sysfs group\n");
+ return status;
+ }
+
+ status = devm_wiegand_register_master(dev, master);
+ if (status) {
+ dev_err(wiegand_gpio->dev, "failed to register master\n");
+ goto free_misc_group;
+ }
+
+ // set 26-bit format as default
+ wiegand_ctlr_set_format_and_paylen(master, WIEGAND_V26,
+ WIEGAND_V26_PAYLEN);
+
+ wiegand_gpio->misc_dev.name = kasprintf(GFP_KERNEL, "wiegand-gpio%u",
+ master->bus_num);
+ wiegand_gpio->misc_dev.minor = MISC_DYNAMIC_MINOR;
+ wiegand_gpio->misc_dev.fops = &wiegand_gpio->fops;
+
+ status = misc_register(&wiegand_gpio->misc_dev);
+ if (status) {
+ dev_err(wiegand_gpio->dev, "couldn't register misc device\n");
+ goto free_misc_group;
+ }
+ wiegand_gpio->misc_dev.parent = wiegand_gpio->dev;
+
+ return status;
+
+free_misc_group:
+ sysfs_remove_group(&wiegand_gpio->dev->kobj, &wiegand_group);
+ return status;
+}
+
+static int wiegand_gpio_remove(struct platform_device *device)
+{
+ struct wiegand_gpio *wiegand_gpio = platform_get_drvdata(device);
+
+ sysfs_remove_group(&wiegand_gpio->dev->kobj, &wiegand_group);
+ misc_deregister(&wiegand_gpio->misc_dev);
+
+ return 0;
+}
+
+static const struct of_device_id wiegand_gpio_dt_idtable[] = {
+ { .compatible = "wiegand-gpio", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, wiegand_gpio_dt_idtable);
+
+static struct platform_driver wiegand_gpio_driver = {
+ .driver = {
+ .name = "wiegand-gpio",
+ .of_match_table = wiegand_gpio_dt_idtable,
+ },
+ .probe = wiegand_gpio_probe,
+ .remove = wiegand_gpio_remove,
+};
+
+module_platform_driver(wiegand_gpio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Wiegand write-only driver realized by GPIOs");
+MODULE_AUTHOR("Martin Zaťovič <m.zatovic1@gmail.com>");
This controller formats the data to a Wiegand format - appends checksum if one of the defined formats is used - and bit-bangs the message on devicetree defined GPIO lines. Several attributes need to be defined in the devicetree in order for this driver to work, namely the data-hi-gpios, data-lo-gpios, pulse-len, frame-gap and interval-len. These attributes are documented in the devicetree binding documentation file. The driver creates a dev file for writing messages on the bus. It also creates two sysfs files to control the format and payload length of messages. Defined formats are 26, 36 and 37-bit, meaning the payloads for these formats are 24, 34 and 35 bit respectively, as two bits are allocated for checksum. A custom format is also supported and it is set by writing 0 to the format sysfs file. Custom format does not calculate and append checksum to messages - they are bit-banged as inputted. Signed-off-by: Martin Zaťovič <m.zatovic1@gmail.com> --- .../ABI/testing/sysfs-driver-wiegand-gpio | 17 + MAINTAINERS | 2 + drivers/Kconfig | 2 + drivers/wiegand/Kconfig | 8 + drivers/wiegand/Makefile | 1 + drivers/wiegand/wiegand-gpio.c | 471 ++++++++++++++++++ 6 files changed, 501 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-driver-wiegand-gpio create mode 100644 drivers/wiegand/Kconfig create mode 100644 drivers/wiegand/Makefile create mode 100644 drivers/wiegand/wiegand-gpio.c