| Message ID | 20230105152230.2814812-1-michael@walle.cc |
|---|---|
| State | Accepted |
| Commit | b203e6f1e8336659878b6b604abd2a5fda0d8767 |
| Headers | show |
| Series | arm64: dts: ls1028a: sl28: get MAC addresses from VPD | expand |
On Thu, Jan 05, 2023 at 04:22:30PM +0100, Michael Walle wrote: > Now that it is finally possible to get the MAC addresses from the OTP > memory, use it to set the addresses of the network devices. > > There are 8 reserved MAC addresses in total per board. Distribute them > as follows: > > +----------+------+------+------+------+------+ > | | var1 | var2 | var3 | var4 | kbox | > +----------+------+------+------+------+------+ > | enetc #0 | +0 | | | +0 | +0 | > | enetc #1 | | | +0 | +1 | +1 | > | enetc #2 | | +2 | | | +2 | > | enetc #3 | | +3 | | | +3 | > | felix p0 | | +0 | | | +4 | > | felix p1 | | +1 | | | +5 | > | felix p2 | | | | | +6 | > | felix p3 | | | | | +7 | > | felix p4 | | | | | | > | felix p5 | | | | | | > +----------+------+------+------+------+------+ > > An empty cell means, the port is not available and thus doesn't need an > ethernet address. > > Signed-off-by: Michael Walle <michael@walle.cc> Applied, thanks!
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts index 73eb6061c73e..af9194eca556 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts @@ -56,10 +56,14 @@ qsgmii_phy3: ethernet-phy@10 { }; &enetc_port2 { + nvmem-cells = <&base_mac_address 2>; + nvmem-cell-names = "mac-address"; status = "okay"; }; &enetc_port3 { + nvmem-cells = <&base_mac_address 3>; + nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -80,6 +84,8 @@ &mscc_felix_port0 { managed = "in-band-status"; phy-handle = <&qsgmii_phy0>; phy-mode = "qsgmii"; + nvmem-cells = <&base_mac_address 4>; + nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -88,6 +94,8 @@ &mscc_felix_port1 { managed = "in-band-status"; phy-handle = <&qsgmii_phy1>; phy-mode = "qsgmii"; + nvmem-cells = <&base_mac_address 5>; + nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -96,6 +104,8 @@ &mscc_felix_port2 { managed = "in-band-status"; phy-handle = <&qsgmii_phy2>; phy-mode = "qsgmii"; + nvmem-cells = <&base_mac_address 6>; + nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -104,6 +114,8 @@ &mscc_felix_port3 { managed = "in-band-status"; phy-handle = <&qsgmii_phy3>; phy-mode = "qsgmii"; + nvmem-cells = <&base_mac_address 7>; + nvmem-cell-names = "mac-address"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts index 7cd29ab970d9..1f34c7553459 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts @@ -55,5 +55,7 @@ &enetc_port0 { &enetc_port1 { phy-handle = <&phy0>; phy-mode = "rgmii-id"; + nvmem-cells = <&base_mac_address 0>; + nvmem-cell-names = "mac-address"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts index 113b1df74bf8..aac41192caa1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts @@ -36,10 +36,14 @@ &enetc_port0 { }; &enetc_port2 { + nvmem-cells = <&base_mac_address 2>; + nvmem-cell-names = "mac-address"; status = "okay"; }; &enetc_port3 { + nvmem-cells = <&base_mac_address 3>; + nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -52,6 +56,8 @@ &mscc_felix_port0 { managed = "in-band-status"; phy-handle = <&phy0>; phy-mode = "sgmii"; + nvmem-cells = <&base_mac_address 0>; + nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -60,6 +66,8 @@ &mscc_felix_port1 { managed = "in-band-status"; phy-handle = <&phy1>; phy-mode = "sgmii"; + nvmem-cells = <&base_mac_address 1>; + nvmem-cell-names = "mac-address"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts index 9b5e92fb753e..a4421db3784e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts @@ -43,5 +43,7 @@ vddh: vddh-regulator { &enetc_port1 { phy-handle = <&phy1>; phy-mode = "rgmii-id"; + nvmem-cells = <&base_mac_address 1>; + nvmem-cell-names = "mac-address"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 4ab17b984b03..8b65af4a7147 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -92,6 +92,8 @@ &enetc_port0 { phy-handle = <&phy0>; phy-mode = "sgmii"; managed = "in-band-status"; + nvmem-cells = <&base_mac_address 0>; + nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -154,6 +156,21 @@ partition@3e0000 { label = "bootloader environment"; }; }; + + otp-1 { + compatible = "user-otp"; + + nvmem-layout { + compatible = "kontron,sl28-vpd"; + + serial_number: serial-number { + }; + + base_mac_address: base-mac-address { + #nvmem-cell-cells = <1>; + }; + }; + }; }; };
Now that it is finally possible to get the MAC addresses from the OTP memory, use it to set the addresses of the network devices. There are 8 reserved MAC addresses in total per board. Distribute them as follows: +----------+------+------+------+------+------+ | | var1 | var2 | var3 | var4 | kbox | +----------+------+------+------+------+------+ | enetc #0 | +0 | | | +0 | +0 | | enetc #1 | | | +0 | +1 | +1 | | enetc #2 | | +2 | | | +2 | | enetc #3 | | +3 | | | +3 | | felix p0 | | +0 | | | +4 | | felix p1 | | +1 | | | +5 | | felix p2 | | | | | +6 | | felix p3 | | | | | +7 | | felix p4 | | | | | | | felix p5 | | | | | | +----------+------+------+------+------+------+ An empty cell means, the port is not available and thus doesn't need an ethernet address. Signed-off-by: Michael Walle <michael@walle.cc> --- .../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 12 ++++++++++++ .../freescale/fsl-ls1028a-kontron-sl28-var1.dts | 2 ++ .../freescale/fsl-ls1028a-kontron-sl28-var2.dts | 8 ++++++++ .../freescale/fsl-ls1028a-kontron-sl28-var4.dts | 2 ++ .../dts/freescale/fsl-ls1028a-kontron-sl28.dts | 17 +++++++++++++++++ 5 files changed, 41 insertions(+)