diff mbox series

[v2,1/6] arm64: dts: qcom: sc8280xp: disable sound nodes

Message ID 20230103103141.15807-2-johan+linaro@kernel.org
State New
Headers show
Series [v2,1/6] arm64: dts: qcom: sc8280xp: disable sound nodes | expand

Commit Message

Johan Hovold Jan. 3, 2023, 10:31 a.m. UTC 
The sound nodes in the SoC dtsi should be disabled by default.

Note that the lpass-tlmm and macro blocks depend on having the board dts
enable the adsp and specifying an appropriate firmware to enable the
q6prm clock controller.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 20 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        | 16 +++++++++++++++
 2 files changed, 36 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 0201c6776746..f30ede5839b2 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -628,6 +628,10 @@  &remoteproc_nsp0 {
 	status = "okay";
 };
 
+&rxmacro {
+	status = "okay";
+};
+
 &soc {
 	wcd938x: codec {
 		compatible = "qcom,wcd9380-codec";
@@ -731,6 +735,8 @@  codec {
 };
 
 &swr0 {
+	status = "okay";
+
 	left_spkr: wsa8830-left@0,1 {
 		compatible = "sdw10217020200";
 		reg = <0 1>;
@@ -776,11 +782,17 @@  wcd_tx: wcd9380-tx@0,3 {
 	};
 };
 
+&txmacro {
+	status = "okay";
+};
+
 &vamacro {
 	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
 	pinctrl-names = "default";
 	vdd-micb-supply = <&vreg_s10b>;
 	qcom,dmic-sample-rate = <600000>;
+
+	status = "okay";
 };
 
 &usb_0 {
@@ -831,12 +843,20 @@  &usb_1_qmpphy {
 	status = "okay";
 };
 
+&wsamacro {
+	status = "okay";
+};
+
 &xo_board_clk {
 	clock-frequency = <38400000>;
 };
 
 /* PINCTRL */
 
+&lpass_tlmm {
+	status = "okay";
+};
+
 &pmc8280_1_gpios {
 	edp_bl_en: edp-bl-en-state {
 		pins = "gpio8";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index ed1e2bee86ee..c1ce2d7b3675 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1733,6 +1733,8 @@  rxmacro: rxmacro@3200000 {
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&rx_swr_default>;
+
+			status = "disabled";
 		};
 
 		/* RX */
@@ -1760,6 +1762,8 @@  swr1: soundwire-controller@3210000 {
 			#sound-dai-cells = <1>;
 			#address-cells = <2>;
 			#size-cells = <0>;
+
+			status = "disabled";
 		};
 
 		txmacro: txmacro@3220000 {
@@ -1783,6 +1787,8 @@  txmacro: txmacro@3220000 {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			#sound-dai-cells = <1>;
+
+			status = "disabled";
 		};
 
 		wsamacro: codec@3240000 {
@@ -1804,6 +1810,8 @@  wsamacro: codec@3240000 {
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&wsa_swr_default>;
+
+			status = "disabled";
 		};
 
 		/* WSA */
@@ -1830,6 +1838,8 @@  swr0: soundwire-controller@3250000 {
 			#sound-dai-cells = <1>;
 			#address-cells = <2>;
 			#size-cells = <0>;
+
+			status = "disabled";
 		};
 
 		/* TX */
@@ -1858,6 +1868,8 @@  swr2: soundwire-controller@3330000 {
 			qcom,ports-word-length =	/bits/ 8 <0xff 0x00 0xff 0xff>;
 			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x00>;
+
+			status = "disabled";
 		};
 
 		vamacro: codec@3370000 {
@@ -1874,6 +1886,8 @@  vamacro: codec@3370000 {
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
 			#sound-dai-cells = <1>;
+
+			status = "disabled";
 		};
 
 		lpass_tlmm: pinctrl@33c0000 {
@@ -1888,6 +1902,8 @@  lpass_tlmm: pinctrl@33c0000 {
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "core", "audio";
 
+			status = "disabled";
+
 			tx_swr_default: tx-swr-default-state {
 				clk-pins {
 					pins = "gpio0";