@@ -217,6 +217,13 @@ clk_ext4: clock-ext4 {
clock-output-names = "clk_ext4";
};
+ clk_dummy: clock-dummy {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "dummy";
+ };
+
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7
@@ -614,9 +621,9 @@ clk: clock-controller@30380000 {
reg = <0x30380000 0x10000>;
#clock-cells = <1>;
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
- <&clk_ext3>, <&clk_ext4>;
+ <&clk_ext3>, <&clk_ext4>, <&clk_dummy>;
clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
- "clk_ext3", "clk_ext4";
+ "clk_ext3", "clk_ext4", "dummy";
assigned-clocks = <&clk IMX8MN_CLK_A53_SRC>,
<&clk IMX8MN_CLK_A53_CORE>,
<&clk IMX8MN_CLK_NOC>,
@@ -331,7 +331,7 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
clk_hw_data->num = IMX8MN_CLK_END;
hws = clk_hw_data->hws;
- hws[IMX8MN_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0);
+ hws[IMX8MN_CLK_DUMMY] = imx_get_clk_hw_by_name(np, "dummy");
hws[IMX8MN_CLK_24M] = imx_get_clk_hw_by_name(np, "osc_24m");
hws[IMX8MN_CLK_32K] = imx_get_clk_hw_by_name(np, "osc_32k");
hws[IMX8MN_CLK_EXT1] = imx_get_clk_hw_by_name(np, "clk_ext1");
The dummy clock was the only fixed rate clock not initialized from the device tree. So let's add it to the device tree like we did for the others fixed rate clocks. This is a preparation patch for the upcoming support to setup all the clocks directly from the device tree. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- (no changes since v1) arch/arm64/boot/dts/freescale/imx8mn.dtsi | 11 +++++++++-- drivers/clk/imx/clk-imx8mn.c | 2 +- 2 files changed, 10 insertions(+), 3 deletions(-)