diff mbox series

ASoC: qcom: Fix building APQ8016 machine driver without SOUNDWIRE

Message ID 20221231115506.82991-1-stephan@gerhold.net
State Accepted
Commit 0cbf1ecd8c4801ec7566231491f7ad9cec31098b
Headers show
Series ASoC: qcom: Fix building APQ8016 machine driver without SOUNDWIRE | expand

Commit Message

Stephan Gerhold Dec. 31, 2022, 11:55 a.m. UTC 
Older Qualcomm platforms like APQ8016 do not have hardware support for
SoundWire, so kernel configurations made specifically for those platforms
will usually not have CONFIG_SOUNDWIRE enabled.

Unfortunately commit 8d89cf6ff229 ("ASoC: qcom: cleanup and fix
dependency of QCOM_COMMON") breaks those kernel configurations, because
SOUNDWIRE is now a required dependency for SND_SOC_QCOM_COMMON (and in
turn also SND_SOC_APQ8016_SBC). Trying to migrate such a kernel config
silently disables SND_SOC_APQ8016_SBC and breaks audio functionality.

The soundwire helpers in common.c are only used by two of the Qualcomm
audio machine drivers, so building and requiring CONFIG_SOUNDWIRE for
all platforms is unnecessary.

There is no need to stuff all common code into a single module. Fix the
issue by moving the soundwire helpers to a separate SND_SOC_QCOM_SDW
module/option that is selected only by the machine drivers that make
use of them. This also allows reverting the imply/depends changes from
the previous fix because both SM8250 and SC8280XP already depend on
SOUNDWIRE, so the soundwire helpers will be only built if SOUNDWIRE
is really enabled.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 8d89cf6ff229 ("ASoC: qcom: cleanup and fix dependency of QCOM_COMMON")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 sound/soc/qcom/Kconfig    |  21 ++++---
 sound/soc/qcom/Makefile   |   2 +
 sound/soc/qcom/common.c   | 114 -----------------------------------
 sound/soc/qcom/common.h   |  10 ----
 sound/soc/qcom/sc8280xp.c |   1 +
 sound/soc/qcom/sdw.c      | 123 ++++++++++++++++++++++++++++++++++++++
 sound/soc/qcom/sdw.h      |  18 ++++++
 sound/soc/qcom/sm8250.c   |   1 +
 8 files changed, 157 insertions(+), 133 deletions(-)
 create mode 100644 sound/soc/qcom/sdw.c
 create mode 100644 sound/soc/qcom/sdw.h

Comments

Mark Brown Jan. 9, 2023, 2:51 p.m. UTC | #1 
On Sat, 31 Dec 2022 12:55:06 +0100, Stephan Gerhold wrote:
> Older Qualcomm platforms like APQ8016 do not have hardware support for
> SoundWire, so kernel configurations made specifically for those platforms
> will usually not have CONFIG_SOUNDWIRE enabled.
> 
> Unfortunately commit 8d89cf6ff229 ("ASoC: qcom: cleanup and fix
> dependency of QCOM_COMMON") breaks those kernel configurations, because
> SOUNDWIRE is now a required dependency for SND_SOC_QCOM_COMMON (and in
> turn also SND_SOC_APQ8016_SBC). Trying to migrate such a kernel config
> silently disables SND_SOC_APQ8016_SBC and breaks audio functionality.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: qcom: Fix building APQ8016 machine driver without SOUNDWIRE
      commit: 0cbf1ecd8c4801ec7566231491f7ad9cec31098b

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 96a6d4731e6f..e7b00d1d9e99 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -2,7 +2,6 @@ 
 menuconfig SND_SOC_QCOM
 	tristate "ASoC support for QCOM platforms"
 	depends on ARCH_QCOM || COMPILE_TEST
-	imply SND_SOC_QCOM_COMMON
 	help
 	  Say Y or M if you want to add support to use audio devices
 	  in Qualcomm Technologies SOC-based platforms.
@@ -60,14 +59,16 @@  config SND_SOC_STORM
 config SND_SOC_APQ8016_SBC
 	tristate "SoC Audio support for APQ8016 SBC platforms"
 	select SND_SOC_LPASS_APQ8016
-	depends on SND_SOC_QCOM_COMMON
+	select SND_SOC_QCOM_COMMON
 	help
 	  Support for Qualcomm Technologies LPASS audio block in
 	  APQ8016 SOC-based systems.
 	  Say Y if you want to use audio devices on MI2S.
 
 config SND_SOC_QCOM_COMMON
-	depends on SOUNDWIRE
+	tristate
+
+config SND_SOC_QCOM_SDW
 	tristate
 
 config SND_SOC_QDSP6_COMMON
@@ -144,7 +145,7 @@  config SND_SOC_MSM8996
 	depends on QCOM_APR
 	depends on COMMON_CLK
 	select SND_SOC_QDSP6
-	depends on SND_SOC_QCOM_COMMON
+	select SND_SOC_QCOM_COMMON
 	help
 	  Support for Qualcomm Technologies LPASS audio block in
 	  APQ8096 SoC-based systems.
@@ -155,7 +156,7 @@  config SND_SOC_SDM845
 	depends on QCOM_APR && I2C && SOUNDWIRE
 	depends on COMMON_CLK
 	select SND_SOC_QDSP6
-	depends on SND_SOC_QCOM_COMMON
+	select SND_SOC_QCOM_COMMON
 	select SND_SOC_RT5663
 	select SND_SOC_MAX98927
 	imply SND_SOC_CROS_EC_CODEC
@@ -169,7 +170,8 @@  config SND_SOC_SM8250
 	depends on QCOM_APR && SOUNDWIRE
 	depends on COMMON_CLK
 	select SND_SOC_QDSP6
-	depends on SND_SOC_QCOM_COMMON
+	select SND_SOC_QCOM_COMMON
+	select SND_SOC_QCOM_SDW
 	help
 	  To add support for audio on Qualcomm Technologies Inc.
 	  SM8250 SoC-based systems.
@@ -180,7 +182,8 @@  config SND_SOC_SC8280XP
 	depends on QCOM_APR && SOUNDWIRE
 	depends on COMMON_CLK
 	select SND_SOC_QDSP6
-	depends on SND_SOC_QCOM_COMMON
+	select SND_SOC_QCOM_COMMON
+	select SND_SOC_QCOM_SDW
 	help
 	  To add support for audio on Qualcomm Technologies Inc.
 	  SC8280XP SoC-based systems.
@@ -190,7 +193,7 @@  config SND_SOC_SC7180
 	tristate "SoC Machine driver for SC7180 boards"
 	depends on I2C && GPIOLIB
 	depends on SOUNDWIRE || SOUNDWIRE=n
-	depends on SND_SOC_QCOM_COMMON
+	select SND_SOC_QCOM_COMMON
 	select SND_SOC_LPASS_SC7180
 	select SND_SOC_MAX98357A
 	select SND_SOC_RT5682_I2C
@@ -204,7 +207,7 @@  config SND_SOC_SC7180
 config SND_SOC_SC7280
 	tristate "SoC Machine driver for SC7280 boards"
 	depends on I2C && SOUNDWIRE
-	depends on SND_SOC_QCOM_COMMON
+	select SND_SOC_QCOM_COMMON
 	select SND_SOC_LPASS_SC7280
 	select SND_SOC_MAX98357A
 	select SND_SOC_WCD938X_SDW
diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
index 8b97172cf990..254350d9dc06 100644
--- a/sound/soc/qcom/Makefile
+++ b/sound/soc/qcom/Makefile
@@ -28,6 +28,7 @@  snd-soc-sdm845-objs := sdm845.o
 snd-soc-sm8250-objs := sm8250.o
 snd-soc-sc8280xp-objs := sc8280xp.o
 snd-soc-qcom-common-objs := common.o
+snd-soc-qcom-sdw-objs := sdw.o
 
 obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
 obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
@@ -38,6 +39,7 @@  obj-$(CONFIG_SND_SOC_SC8280XP) += snd-soc-sc8280xp.o
 obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
 obj-$(CONFIG_SND_SOC_SM8250) += snd-soc-sm8250.o
 obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
+obj-$(CONFIG_SND_SOC_QCOM_SDW) += snd-soc-qcom-sdw.o
 
 #DSP lib
 obj-$(CONFIG_SND_SOC_QDSP6) += qdsp6/
diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c
index 49c74c1662a3..96fe80241fb4 100644
--- a/sound/soc/qcom/common.c
+++ b/sound/soc/qcom/common.c
@@ -180,120 +180,6 @@  int qcom_snd_parse_of(struct snd_soc_card *card)
 }
 EXPORT_SYMBOL_GPL(qcom_snd_parse_of);
 
-int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream,
-			 struct sdw_stream_runtime *sruntime,
-			 bool *stream_prepared)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
-	int ret;
-
-	if (!sruntime)
-		return 0;
-
-	switch (cpu_dai->id) {
-	case WSA_CODEC_DMA_RX_0:
-	case WSA_CODEC_DMA_RX_1:
-	case RX_CODEC_DMA_RX_0:
-	case RX_CODEC_DMA_RX_1:
-	case TX_CODEC_DMA_TX_0:
-	case TX_CODEC_DMA_TX_1:
-	case TX_CODEC_DMA_TX_2:
-	case TX_CODEC_DMA_TX_3:
-		break;
-	default:
-		return 0;
-	}
-
-	if (*stream_prepared) {
-		sdw_disable_stream(sruntime);
-		sdw_deprepare_stream(sruntime);
-		*stream_prepared = false;
-	}
-
-	ret = sdw_prepare_stream(sruntime);
-	if (ret)
-		return ret;
-
-	/**
-	 * NOTE: there is a strict hw requirement about the ordering of port
-	 * enables and actual WSA881x PA enable. PA enable should only happen
-	 * after soundwire ports are enabled if not DC on the line is
-	 * accumulated resulting in Click/Pop Noise
-	 * PA enable/mute are handled as part of codec DAPM and digital mute.
-	 */
-
-	ret = sdw_enable_stream(sruntime);
-	if (ret) {
-		sdw_deprepare_stream(sruntime);
-		return ret;
-	}
-	*stream_prepared  = true;
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(qcom_snd_sdw_prepare);
-
-int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream,
-			   struct snd_pcm_hw_params *params,
-			   struct sdw_stream_runtime **psruntime)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai;
-	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
-	struct sdw_stream_runtime *sruntime;
-	int i;
-
-	switch (cpu_dai->id) {
-	case WSA_CODEC_DMA_RX_0:
-	case RX_CODEC_DMA_RX_0:
-	case RX_CODEC_DMA_RX_1:
-	case TX_CODEC_DMA_TX_0:
-	case TX_CODEC_DMA_TX_1:
-	case TX_CODEC_DMA_TX_2:
-	case TX_CODEC_DMA_TX_3:
-		for_each_rtd_codec_dais(rtd, i, codec_dai) {
-			sruntime = snd_soc_dai_get_stream(codec_dai, substream->stream);
-			if (sruntime != ERR_PTR(-ENOTSUPP))
-				*psruntime = sruntime;
-		}
-		break;
-	}
-
-	return 0;
-
-}
-EXPORT_SYMBOL_GPL(qcom_snd_sdw_hw_params);
-
-int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream,
-			 struct sdw_stream_runtime *sruntime, bool *stream_prepared)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
-
-	switch (cpu_dai->id) {
-	case WSA_CODEC_DMA_RX_0:
-	case WSA_CODEC_DMA_RX_1:
-	case RX_CODEC_DMA_RX_0:
-	case RX_CODEC_DMA_RX_1:
-	case TX_CODEC_DMA_TX_0:
-	case TX_CODEC_DMA_TX_1:
-	case TX_CODEC_DMA_TX_2:
-	case TX_CODEC_DMA_TX_3:
-		if (sruntime && *stream_prepared) {
-			sdw_disable_stream(sruntime);
-			sdw_deprepare_stream(sruntime);
-			*stream_prepared = false;
-		}
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(qcom_snd_sdw_hw_free);
-
 int qcom_snd_wcd_jack_setup(struct snd_soc_pcm_runtime *rtd,
 			    struct snd_soc_jack *jack, bool *jack_setup)
 {
diff --git a/sound/soc/qcom/common.h b/sound/soc/qcom/common.h
index 3ef5bb6d12df..d7f80ee5ae26 100644
--- a/sound/soc/qcom/common.h
+++ b/sound/soc/qcom/common.h
@@ -5,19 +5,9 @@ 
 #define __QCOM_SND_COMMON_H__
 
 #include <sound/soc.h>
-#include <linux/soundwire/sdw.h>
 
 int qcom_snd_parse_of(struct snd_soc_card *card);
 int qcom_snd_wcd_jack_setup(struct snd_soc_pcm_runtime *rtd,
 			    struct snd_soc_jack *jack, bool *jack_setup);
 
-int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream,
-			 struct sdw_stream_runtime *runtime,
-			 bool *stream_prepared);
-int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream,
-			   struct snd_pcm_hw_params *params,
-			   struct sdw_stream_runtime **psruntime);
-int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream,
-			 struct sdw_stream_runtime *sruntime,
-			 bool *stream_prepared);
 #endif
diff --git a/sound/soc/qcom/sc8280xp.c b/sound/soc/qcom/sc8280xp.c
index ade44ad7c585..14d9fea33d16 100644
--- a/sound/soc/qcom/sc8280xp.c
+++ b/sound/soc/qcom/sc8280xp.c
@@ -12,6 +12,7 @@ 
 #include <linux/input-event-codes.h>
 #include "qdsp6/q6afe.h"
 #include "common.h"
+#include "sdw.h"
 
 #define DRIVER_NAME		"sc8280xp"
 
diff --git a/sound/soc/qcom/sdw.c b/sound/soc/qcom/sdw.c
new file mode 100644
index 000000000000..10249519a39e
--- /dev/null
+++ b/sound/soc/qcom/sdw.c
@@ -0,0 +1,123 @@ 
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited.
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include <linux/module.h>
+#include <sound/soc.h>
+#include "qdsp6/q6afe.h"
+#include "sdw.h"
+
+int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream,
+			 struct sdw_stream_runtime *sruntime,
+			 bool *stream_prepared)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	int ret;
+
+	if (!sruntime)
+		return 0;
+
+	switch (cpu_dai->id) {
+	case WSA_CODEC_DMA_RX_0:
+	case WSA_CODEC_DMA_RX_1:
+	case RX_CODEC_DMA_RX_0:
+	case RX_CODEC_DMA_RX_1:
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+		break;
+	default:
+		return 0;
+	}
+
+	if (*stream_prepared) {
+		sdw_disable_stream(sruntime);
+		sdw_deprepare_stream(sruntime);
+		*stream_prepared = false;
+	}
+
+	ret = sdw_prepare_stream(sruntime);
+	if (ret)
+		return ret;
+
+	/**
+	 * NOTE: there is a strict hw requirement about the ordering of port
+	 * enables and actual WSA881x PA enable. PA enable should only happen
+	 * after soundwire ports are enabled if not DC on the line is
+	 * accumulated resulting in Click/Pop Noise
+	 * PA enable/mute are handled as part of codec DAPM and digital mute.
+	 */
+
+	ret = sdw_enable_stream(sruntime);
+	if (ret) {
+		sdw_deprepare_stream(sruntime);
+		return ret;
+	}
+	*stream_prepared  = true;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(qcom_snd_sdw_prepare);
+
+int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream,
+			   struct snd_pcm_hw_params *params,
+			   struct sdw_stream_runtime **psruntime)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct sdw_stream_runtime *sruntime;
+	int i;
+
+	switch (cpu_dai->id) {
+	case WSA_CODEC_DMA_RX_0:
+	case RX_CODEC_DMA_RX_0:
+	case RX_CODEC_DMA_RX_1:
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+		for_each_rtd_codec_dais(rtd, i, codec_dai) {
+			sruntime = snd_soc_dai_get_stream(codec_dai, substream->stream);
+			if (sruntime != ERR_PTR(-ENOTSUPP))
+				*psruntime = sruntime;
+		}
+		break;
+	}
+
+	return 0;
+
+}
+EXPORT_SYMBOL_GPL(qcom_snd_sdw_hw_params);
+
+int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream,
+			 struct sdw_stream_runtime *sruntime, bool *stream_prepared)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+
+	switch (cpu_dai->id) {
+	case WSA_CODEC_DMA_RX_0:
+	case WSA_CODEC_DMA_RX_1:
+	case RX_CODEC_DMA_RX_0:
+	case RX_CODEC_DMA_RX_1:
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+		if (sruntime && *stream_prepared) {
+			sdw_disable_stream(sruntime);
+			sdw_deprepare_stream(sruntime);
+			*stream_prepared = false;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_snd_sdw_hw_free);
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/qcom/sdw.h b/sound/soc/qcom/sdw.h
new file mode 100644
index 000000000000..d74cbb84da13
--- /dev/null
+++ b/sound/soc/qcom/sdw.h
@@ -0,0 +1,18 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#ifndef __QCOM_SND_SDW_H__
+#define __QCOM_SND_SDW_H__
+
+#include <linux/soundwire/sdw.h>
+
+int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream,
+			 struct sdw_stream_runtime *runtime,
+			 bool *stream_prepared);
+int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream,
+			   struct snd_pcm_hw_params *params,
+			   struct sdw_stream_runtime **psruntime);
+int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream,
+			 struct sdw_stream_runtime *sruntime,
+			 bool *stream_prepared);
+#endif
diff --git a/sound/soc/qcom/sm8250.c b/sound/soc/qcom/sm8250.c
index 8dbe9ef41b1c..9626a9ef78c2 100644
--- a/sound/soc/qcom/sm8250.c
+++ b/sound/soc/qcom/sm8250.c
@@ -12,6 +12,7 @@ 
 #include <linux/input-event-codes.h>
 #include "qdsp6/q6afe.h"
 #include "common.h"
+#include "sdw.h"
 
 #define DRIVER_NAME		"sm8250"
 #define MI2S_BCLK_RATE		1536000