@@ -6,9 +6,10 @@
*/
#include <linux/kernel.h>
-#include <linux/gpio/driver.h>
#include <linux/pinctrl/pinctrl.h>
+
#include <linux/mfd/abx500/ab8500.h>
+
#include "pinctrl-abx500.h"
/* All the pins that can be used for GPIO and some other functions */
@@ -6,9 +6,10 @@
*/
#include <linux/kernel.h>
-#include <linux/gpio/driver.h>
#include <linux/pinctrl/pinctrl.h>
+
#include <linux/mfd/abx500/ab8500.h>
+
#include "pinctrl-abx500.h"
/* All the pins that can be used for GPIO and some other functions */
@@ -6,33 +6,37 @@
*
* Driver allows to use AxB5xx unused pins to be used as GPIO
*/
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/init.h>
+#include <linux/bitops.h>
#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
-#include <linux/pinctrl/pinctrl.h>
+
#include <linux/pinctrl/consumer.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
-#include "pinctrl-abx500.h"
#include "../core.h"
#include "../pinconf.h"
#include "../pinctrl-utils.h"
+#include "pinctrl-abx500.h"
+
/*
* GPIO registers offset
* Bank: 0x10
@@ -2,6 +2,10 @@
#ifndef PINCTRL_PINCTRL_ABx500_H
#define PINCTRL_PINCTRL_ABx500_H
+#include <linux/types.h>
+
+struct pinctrl_pin_desc;
+
/* Package definitions */
#define PINCTRL_AB8500 0
#define PINCTRL_AB8505 1
@@ -1,6 +1,9 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/kernel.h>
+#include <linux/types.h>
+
#include <linux/pinctrl/pinctrl.h>
+
#include "pinctrl-nomadik.h"
/* All the pins that can be used for GPIO and some other functions */
@@ -1,6 +1,9 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/kernel.h>
+#include <linux/types.h>
+
#include <linux/pinctrl/pinctrl.h>
+
#include "pinctrl-nomadik.h"
/* All the pins that can be used for GPIO and some other functions */
@@ -7,30 +7,34 @@
* Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
* Copyright (C) 2011-2013 Linus Walleij <linus.walleij@linaro.org>
*/
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
+#include <linux/bitops.h>
#include <linux/clk.h>
+#include <linux/device.h>
#include <linux/err.h>
#include <linux/gpio/driver.h>
-#include <linux/spinlock.h>
+#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/of_device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
#include <linux/of_address.h>
-#include <linux/bitops.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+/* Since we request GPIOs from ourself */
+#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-/* Since we request GPIOs from ourself */
-#include <linux/pinctrl/consumer.h>
-#include "pinctrl-nomadik.h"
+
#include "../core.h"
#include "../pinctrl-utils.h"
+#include "pinctrl-nomadik.h"
+
/*
* The GPIO module in the Nomadik family of Systems-on-Chip is an
* AMBA device, managing 32 pins and alternate functions. The logic block
@@ -2,6 +2,11 @@
#ifndef PINCTRL_PINCTRL_NOMADIK_H
#define PINCTRL_PINCTRL_NOMADIK_H
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <linux/pinctrl/pinctrl.h>
+
/* Package definitions */
#define PINCTRL_NMK_STN8815 0
#define PINCTRL_NMK_DB8500 1
Do not imply that some of the generic headers may be always included. Instead, include explicitly what we are direct user of. While at it, sort headers alphabetically. Fixes: e5530adc17a7 ("pinctrl: Clean up headers") Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/pinctrl/nomadik/pinctrl-ab8500.c | 3 +- drivers/pinctrl/nomadik/pinctrl-ab8505.c | 3 +- drivers/pinctrl/nomadik/pinctrl-abx500.c | 32 +++++++++++-------- drivers/pinctrl/nomadik/pinctrl-abx500.h | 4 +++ .../pinctrl/nomadik/pinctrl-nomadik-db8500.c | 3 ++ .../pinctrl/nomadik/pinctrl-nomadik-stn8815.c | 3 ++ drivers/pinctrl/nomadik/pinctrl-nomadik.c | 30 +++++++++-------- drivers/pinctrl/nomadik/pinctrl-nomadik.h | 5 +++ 8 files changed, 54 insertions(+), 29 deletions(-)