diff mbox series

[v2,3/3] riscv: dts: starfive: Add mmc node

Message ID 20221227115856.460790-4-william.qiu@starfivetech.com
State Superseded
Headers show
Series StarFive's SDIO/eMMC driver support | expand

Commit Message

William Qiu Dec. 27, 2022, 11:58 a.m. UTC 
This adds the mmc node for the StarFive JH7110 SoC.
Set sdioo node to emmc and set sdio1 node to sd.

Signed-off-by: William Qiu <william.qiu@starfivetech.com>
---
 .../jh7110-starfive-visionfive-v2.dts         | 25 ++++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 38 +++++++++++++++++++
 2 files changed, 63 insertions(+)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
index c8946cf3a268..d8244fd1f5a0 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
@@ -47,6 +47,31 @@  &clk_rtc {
 	clock-frequency = <32768>;
 };
 
+&mmc0 {
+	max-frequency = <100000000>;
+	card-detect-delay = <300>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	cap-mmc-hw-reset;
+	post-power-on-delay-ms = <200>;
+	status = "okay";
+};
+
+&mmc1 {
+	max-frequency = <100000000>;
+	card-detect-delay = <300>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	broken-cd;
+	cap-sd-highspeed;
+	post-power-on-delay-ms = <200>;
+	status = "okay";
+};
+
 &gmac0_rmii_refin {
 	clock-frequency = <50000000>;
 };
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index c22e8f1d2640..08a780d2c0f4 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -331,6 +331,11 @@  aoncrg: clock-controller@17000000 {
 			#reset-cells = <1>;
 		};
 
+		syscon: syscon@13030000 {
+			compatible = "starfive,syscon", "syscon";
+			reg = <0x0 0x13030000 0x0 0x1000>;
+		};
+
 		gpio: gpio@13040000 {
 			compatible = "starfive,jh7110-sys-pinctrl";
 			reg = <0x0 0x13040000 0x0 0x10000>;
@@ -433,5 +438,38 @@  uart5: serial@12020000 {
 			reg-shift = <2>;
 			status = "disabled";
 		};
+
+		/* unremovable emmc as mmcblk0 */
+		mmc0: mmc@16010000 {
+			compatible = "starfive,jh7110-mmc";
+			reg = <0x0 0x16010000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SDIO0_AHB>,
+				 <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
+			clock-names = "biu","ciu";
+			resets = <&syscrg JH7110_SYSRST_SDIO0_AHB>;
+			reset-names = "reset";
+			interrupts = <74>;
+			fifo-depth = <32>;
+			fifo-watermark-aligned;
+			data-addr = <0>;
+			starfive,syscon = <&syscon 0x14 0x1a 0x7c000000>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@16020000 {
+			compatible = "starfive,jh7110-mmc";
+			reg = <0x0 0x16020000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SDIO1_AHB>,
+				 <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
+			clock-names = "biu","ciu";
+			resets = <&syscrg JH7110_SYSRST_SDIO1_AHB>;
+			reset-names = "reset";
+			interrupts = <75>;
+			fifo-depth = <32>;
+			fifo-watermark-aligned;
+			data-addr = <0>;
+			starfive,syscon = <&syscon 0x9c 0x1 0x3e>;
+			status = "disabled";
+		};
 	};
 };