@@ -31,13 +31,80 @@
#include "exec-memory.h"
#define SMP_BOOT_ADDR 0xe0000000
-#define SMP_BOOTREG_ADDR 0x10000030
#define VEXPRESS_BOARD_ID 0x8e0
static struct arm_boot_info vexpress_binfo = {
.smp_loader_start = SMP_BOOT_ADDR,
- .smp_bootreg_addr = SMP_BOOTREG_ADDR,
+};
+
+/* Address maps for peripherals:
+ * the Versatile Express motherboard has two possible maps,
+ * the "legacy" one (used for A9) and the "Cortex-A Series"
+ * map (used for newer cores).
+ * Individual daughterboards can also have different maps for
+ * their peripherals.
+ */
+
+enum {
+ VE_SYSREGS,
+ VE_SP810,
+ VE_SERIALPCI,
+ VE_PL041,
+ VE_MMCI,
+ VE_KMI0,
+ VE_KMI1,
+ VE_UART0,
+ VE_UART1,
+ VE_UART2,
+ VE_UART3,
+ VE_WDT,
+ VE_TIMER01,
+ VE_TIMER23,
+ VE_SERIALDVI,
+ VE_RTC,
+ VE_COMPACTFLASH,
+ VE_CLCD,
+ VE_NORFLASH0,
+ VE_NORFLASH0ALIAS,
+ VE_NORFLASH1,
+ VE_SRAM,
+ VE_VIDEORAM,
+ VE_ETHERNET,
+ VE_USB,
+ VE_DAPROM,
+};
+
+static target_phys_addr_t motherboard_legacy_map[] = {
+ /* CS7: 0x10000000 .. 0x10020000 */
+ [VE_SYSREGS] = 0x10000000,
+ [VE_SP810] = 0x10001000,
+ [VE_SERIALPCI] = 0x10002000,
+ [VE_PL041] = 0x10004000,
+ [VE_MMCI] = 0x10005000,
+ [VE_KMI0] = 0x10006000,
+ [VE_KMI1] = 0x10007000,
+ [VE_UART0] = 0x10009000,
+ [VE_UART1] = 0x1000a000,
+ [VE_UART2] = 0x1000b000,
+ [VE_UART3] = 0x1000c000,
+ [VE_WDT] = 0x1000f000,
+ [VE_TIMER01] = 0x10011000,
+ [VE_TIMER23] = 0x10012000,
+ [VE_SERIALDVI] = 0x10016000,
+ [VE_RTC] = 0x10017000,
+ [VE_COMPACTFLASH] = 0x1001a000,
+ [VE_CLCD] = 0x1001f000,
+ /* CS0: 0x40000000 .. 0x44000000 */
+ [VE_NORFLASH0] = 0x40000000,
+ /* CS1: 0x44000000 .. 0x48000000 */
+ [VE_NORFLASH1] = 0x44000000,
+ /* CS2: 0x48000000 .. 0x4a000000 */
+ [VE_SRAM] = 0x48000000,
+ /* CS3: 0x4c000000 .. 0x50000000 */
+ [VE_VIDEORAM] = 0x4c000000,
+ [VE_ETHERNET] = 0x4e000000,
+ [VE_USB] = 0x4f000000,
};
static void vexpress_a9_init(ram_addr_t ram_size,
@@ -61,6 +128,7 @@ static void vexpress_a9_init(ram_addr_t ram_size,
uint32_t proc_id;
uint32_t sys_id;
ram_addr_t low_ram_size, vram_size, sram_size;
+ target_phys_addr_t *map = motherboard_legacy_map;
if (!cpu_model) {
cpu_model = "cortex-a9";
@@ -116,53 +184,53 @@ static void vexpress_a9_init(ram_addr_t ram_size,
pic[n] = qdev_get_gpio_in(dev, n);
}
- /* Motherboard peripherals CS7 : 0x10000000 .. 0x10020000 */
+ /* Motherboard peripherals: the wiring is the same but the
+ * addresses vary between the legacy and A-Series memory maps.
+ */
+
sys_id = 0x1190f500;
proc_id = 0x0c000191;
- /* 0x10000000 System registers */
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
qdev_init_nofail(sysctl);
qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
- sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, 0x10000000);
+ sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, map[VE_SYSREGS]);
+
+ /* VE_SP810: not modelled */
+ /* VE_SERIALPCI: not modelled */
- /* 0x10001000 SP810 system control */
- /* 0x10002000 serial bus PCI */
- /* 0x10004000 PL041 audio */
pl041 = qdev_create(NULL, "pl041");
qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
qdev_init_nofail(pl041);
- sysbus_mmio_map(sysbus_from_qdev(pl041), 0, 0x10004000);
+ sysbus_mmio_map(sysbus_from_qdev(pl041), 0, map[VE_PL041]);
sysbus_connect_irq(sysbus_from_qdev(pl041), 0, pic[11]);
- dev = sysbus_create_varargs("pl181", 0x10005000, pic[9], pic[10], NULL);
+ dev = sysbus_create_varargs("pl181", map[VE_MMCI], pic[9], pic[10], NULL);
/* Wire up MMC card detect and read-only signals */
qdev_connect_gpio_out(dev, 0,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT));
qdev_connect_gpio_out(dev, 1,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN));
- sysbus_create_simple("pl050_keyboard", 0x10006000, pic[12]);
- sysbus_create_simple("pl050_mouse", 0x10007000, pic[13]);
-
- sysbus_create_simple("pl011", 0x10009000, pic[5]);
- sysbus_create_simple("pl011", 0x1000a000, pic[6]);
- sysbus_create_simple("pl011", 0x1000b000, pic[7]);
- sysbus_create_simple("pl011", 0x1000c000, pic[8]);
+ sysbus_create_simple("pl050_keyboard", map[VE_KMI0], pic[12]);
+ sysbus_create_simple("pl050_mouse", map[VE_KMI1], pic[13]);
- /* 0x1000f000 SP805 WDT */
+ sysbus_create_simple("pl011", map[VE_UART0], pic[5]);
+ sysbus_create_simple("pl011", map[VE_UART1], pic[6]);
+ sysbus_create_simple("pl011", map[VE_UART2], pic[7]);
+ sysbus_create_simple("pl011", map[VE_UART3], pic[8]);
- sysbus_create_simple("sp804", 0x10011000, pic[2]);
- sysbus_create_simple("sp804", 0x10012000, pic[3]);
+ sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]);
+ sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]);
- /* 0x10016000 Serial Bus DVI */
+ /* VE_SERIALDVI: not modelled */
- sysbus_create_simple("pl031", 0x10017000, pic[4]); /* RTC */
+ sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */
- /* 0x1001a000 Compact Flash */
+ /* VE_COMPACTFLASH: not modelled */
- /* 0x1001f000 PL111 CLCD (motherboard) */
+ /* VE_CLCD: not modelled (we use the daughterboard CLCD only) */
/* Daughterboard peripherals : 0x10020000 .. 0x20000000 */
@@ -184,28 +252,28 @@ static void vexpress_a9_init(ram_addr_t ram_size,
/* 0x1e00a000 PL310 L2 Cache Controller */
sysbus_create_varargs("l2x0", 0x1e00a000, NULL);
- /* CS0: NOR0 flash : 0x40000000 .. 0x44000000 */
- /* CS4: NOR1 flash : 0x44000000 .. 0x48000000 */
- /* CS2: SRAM : 0x48000000 .. 0x4a000000 */
+ /* VE_NORFLASH0: not modelled */
+ /* VE_NORFLASH0ALIAS: not modelled */
+ /* VE_NORFLASH1: not modelled */
+
sram_size = 0x2000000;
memory_region_init_ram(sram, "vexpress.sram", sram_size);
vmstate_register_ram_global(sram);
- memory_region_add_subregion(sysmem, 0x48000000, sram);
-
- /* CS3: USB, ethernet, VRAM : 0x4c000000 .. 0x50000000 */
+ memory_region_add_subregion(sysmem, map[VE_SRAM], sram);
- /* 0x4c000000 Video RAM */
vram_size = 0x800000;
memory_region_init_ram(vram, "vexpress.vram", vram_size);
vmstate_register_ram_global(vram);
- memory_region_add_subregion(sysmem, 0x4c000000, vram);
+ memory_region_add_subregion(sysmem, map[VE_VIDEORAM], vram);
/* 0x4e000000 LAN9118 Ethernet */
if (nd_table[0].vlan) {
- lan9118_init(&nd_table[0], 0x4e000000, pic[15]);
+ lan9118_init(&nd_table[0], map[VE_ETHERNET], pic[15]);
}
- /* 0x4f000000 ISP1761 USB */
+ /* VE_USB: not modelled */
+
+ /* VE_DAPROM: not modelled */
/* ??? Hack to map an additional page of ram for the secondary CPU
startup code. I guess this works on real hardware because the
@@ -222,6 +290,7 @@ static void vexpress_a9_init(ram_addr_t ram_size,
vexpress_binfo.nb_cpus = smp_cpus;
vexpress_binfo.board_id = VEXPRESS_BOARD_ID;
vexpress_binfo.loader_start = 0x60000000;
+ vexpress_binfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30;
arm_load_kernel(first_cpu, &vexpress_binfo);
}
Pull the addresses used for mapping motherboard peripherals into memory out into a table. This will allow us to simply provide a second table to implement the "Cortex-A Series" memory map used by the A15 variant of Versatile Express, as well as the current "Legacy" map used by A9. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/vexpress.c | 137 +++++++++++++++++++++++++++++++++++++++++++-------------- 1 files changed, 103 insertions(+), 34 deletions(-)