diff mbox series

dt-bindings: phy: qcom,qusb2: do not define properties in "if" block

Message ID 20221224154226.43417-1-krzysztof.kozlowski@linaro.org
State Accepted
Commit b1e96b50da7b921be4bc6684682b856cebfe8ad0
Headers show
Series dt-bindings: phy: qcom,qusb2: do not define properties in "if" block | expand

Commit Message

Krzysztof Kozlowski Dec. 24, 2022, 3:42 p.m. UTC 
It is more readable to define properties in top-level "properties:" and
restrict them (if needed) per compatible in the "if" block.  Defining
properties in "if" block  does not work correctly with
additionalProperties:false:

  sc7180-trogdor-pazquel-lte-ti.dtb: phy@88e3000: 'qcom,bias-ctrl-value', 'qcom,charge-ctrl-value', 'qcom,hsdisc-trim-value',
    'qcom,imp-res-offset-value', 'qcom,preemphasis-level', 'qcom,preemphasis-width' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/phy/qcom,qusb2-phy.yaml          | 160 ++++++++++--------
 1 file changed, 85 insertions(+), 75 deletions(-)

Comments

Rob Herring Jan. 8, 2023, 6:05 p.m. UTC | #1 
On Sat, 24 Dec 2022 16:42:26 +0100, Krzysztof Kozlowski wrote:
> It is more readable to define properties in top-level "properties:" and
> restrict them (if needed) per compatible in the "if" block.  Defining
> properties in "if" block  does not work correctly with
> additionalProperties:false:
> 
>   sc7180-trogdor-pazquel-lte-ti.dtb: phy@88e3000: 'qcom,bias-ctrl-value', 'qcom,charge-ctrl-value', 'qcom,hsdisc-trim-value',
>     'qcom,imp-res-offset-value', 'qcom,preemphasis-level', 'qcom,preemphasis-width' do not match any of the regexes: 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/phy/qcom,qusb2-phy.yaml          | 160 ++++++++++--------
>  1 file changed, 85 insertions(+), 75 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
Vinod Koul Jan. 13, 2023, 6:17 p.m. UTC | #2 
On 24-12-22, 16:42, Krzysztof Kozlowski wrote:
> It is more readable to define properties in top-level "properties:" and
> restrict them (if needed) per compatible in the "if" block.  Defining
> properties in "if" block  does not work correctly with
> additionalProperties:false:

Applied, thanks
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index 636ea430fbff..7f403e77f320 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -82,81 +82,74 @@  properties:
       Phandle to TCSR syscon register region.
     $ref: /schemas/types.yaml#/definitions/phandle
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: qcom,qusb2-v2-phy
-then:
-  properties:
-    qcom,imp-res-offset-value:
-      description:
-        It is a 6 bit value that specifies offset to be
-        added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY
-        tuning parameter that may vary for different boards of same SOC.
-      $ref: /schemas/types.yaml#/definitions/uint32
-      minimum: 0
-      maximum: 63
-      default: 0
-
-    qcom,bias-ctrl-value:
-      description:
-        It is a 6 bit value that specifies bias-ctrl-value. It is a PHY
-        tuning parameter that may vary for different boards of same SOC.
-      $ref: /schemas/types.yaml#/definitions/uint32
-      minimum: 0
-      maximum: 63
-      default: 32
-
-    qcom,charge-ctrl-value:
-      description:
-        It is a 2 bit value that specifies charge-ctrl-value. It is a PHY
-        tuning parameter that may vary for different boards of same SOC.
-      $ref: /schemas/types.yaml#/definitions/uint32
-      minimum: 0
-      maximum: 3
-      default: 0
-
-    qcom,hstx-trim-value:
-      description:
-        It is a 4 bit value that specifies tuning for HSTX
-        output current.
-        Possible range is - 15mA to 24mA (stepsize of 600 uA).
-        See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
-      $ref: /schemas/types.yaml#/definitions/uint32
-      minimum: 0
-      maximum: 15
-      default: 3
-
-    qcom,preemphasis-level:
-      description:
-        It is a 2 bit value that specifies pre-emphasis level.
-        Possible range is 0 to 15% (stepsize of 5%).
-        See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
-      $ref: /schemas/types.yaml#/definitions/uint32
-      minimum: 0
-      maximum: 3
-      default: 2
-
-    qcom,preemphasis-width:
-      description:
-        It is a 1 bit value that specifies how long the HSTX
-        pre-emphasis (specified using qcom,preemphasis-level) must be in
-        effect. Duration could be half-bit of full-bit.
-        See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
-      $ref: /schemas/types.yaml#/definitions/uint32
-      minimum: 0
-      maximum: 1
-      default: 0
-
-    qcom,hsdisc-trim-value:
-      description:
-        It is a 2 bit value tuning parameter that control disconnect
-        threshold and may vary for different boards of same SOC.
-      $ref: /schemas/types.yaml#/definitions/uint32
-      minimum: 0
-      maximum: 3
-      default: 0
+  qcom,imp-res-offset-value:
+    description:
+      It is a 6 bit value that specifies offset to be
+      added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY
+      tuning parameter that may vary for different boards of same SOC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 63
+    default: 0
+
+  qcom,bias-ctrl-value:
+    description:
+      It is a 6 bit value that specifies bias-ctrl-value. It is a PHY
+      tuning parameter that may vary for different boards of same SOC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 63
+    default: 32
+
+  qcom,charge-ctrl-value:
+    description:
+      It is a 2 bit value that specifies charge-ctrl-value. It is a PHY
+      tuning parameter that may vary for different boards of same SOC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 0
+
+  qcom,hstx-trim-value:
+    description:
+      It is a 4 bit value that specifies tuning for HSTX
+      output current.
+      Possible range is - 15mA to 24mA (stepsize of 600 uA).
+      See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 3
+
+  qcom,preemphasis-level:
+    description:
+      It is a 2 bit value that specifies pre-emphasis level.
+      Possible range is 0 to 15% (stepsize of 5%).
+      See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 2
+
+  qcom,preemphasis-width:
+    description:
+      It is a 1 bit value that specifies how long the HSTX
+      pre-emphasis (specified using qcom,preemphasis-level) must be in
+      effect. Duration could be half-bit of full-bit.
+      See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+    default: 0
+
+  qcom,hsdisc-trim-value:
+    description:
+      It is a 2 bit value tuning parameter that control disconnect
+      threshold and may vary for different boards of same SOC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 0
 
 required:
   - compatible
@@ -169,6 +162,23 @@  required:
   - vdda-phy-dpdm-supply
   - resets
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: qcom,qusb2-v2-phy
+    then:
+      properties:
+        qcom,imp-res-offset-value: false
+        qcom,bias-ctrl-value: false
+        qcom,charge-ctrl-value: false
+        qcom,hstx-trim-value: false
+        qcom,preemphasis-level: false
+        qcom,preemphasis-width: false
+        qcom,hsdisc-trim-value: false
+
 additionalProperties: false
 
 examples: