| Message ID | 20221223193403.781355-3-rayyan@ansari.sh |
|---|---|
| State | Accepted |
| Commit | 79ca56c11e9004ba1b012822a68eb4d57826a721 |
| Headers | show |
| Series | ARM: dts: qcom: pm8226: style fixes and new nodes | expand |
On Freitag, 23. Dezember 2022 20:34:02 CET Rayyan Ansari wrote: > The PON (Power On) device in PM8226 supports both the power key and > resin (reset input). > The reset input is usually connected to a physical volume up/down button. > > Signed-off-by: Rayyan Ansari <rayyan@ansari.sh> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> > --- > arch/arm/boot/dts/qcom-pm8226.dtsi | 24 +++++++++++++++++++----- > 1 file changed, 19 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi > b/arch/arm/boot/dts/qcom-pm8226.dtsi index d99532ea70b2..403324a35cf5 > 100644 > --- a/arch/arm/boot/dts/qcom-pm8226.dtsi > +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi > @@ -1,5 +1,6 @@ > // SPDX-License-Identifier: BSD-3-Clause > #include <dt-bindings/iio/qcom,spmi-vadc.h> > +#include <dt-bindings/input/linux-event-codes.h> > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/spmi/spmi.h> > > @@ -10,12 +11,25 @@ pm8226_0: pm8226@0 { > #address-cells = <1>; > #size-cells = <0>; > > - pwrkey@800 { > - compatible = "qcom,pm8941-pwrkey"; > + pon@800 { > + compatible = "qcom,pm8916-pon"; > reg = <0x800>; > - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > - debounce = <15625>; > - bias-pull-up; > + > + pwrkey { > + compatible = "qcom,pm8941- pwrkey"; > + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + linux,code = <KEY_POWER>; > + }; > + > + pm8226_resin: resin { > + compatible = "qcom,pm8941-resin"; > + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + status = "disabled"; > + }; > }; > > smbb: charger@1000 {
diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi index d99532ea70b2..403324a35cf5 100644 --- a/arch/arm/boot/dts/qcom-pm8226.dtsi +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: BSD-3-Clause #include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> @@ -10,12 +11,25 @@ pm8226_0: pm8226@0 { #address-cells = <1>; #size-cells = <0>; - pwrkey@800 { - compatible = "qcom,pm8941-pwrkey"; + pon@800 { + compatible = "qcom,pm8916-pon"; reg = <0x800>; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + pm8226_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; }; smbb: charger@1000 {
The PON (Power On) device in PM8226 supports both the power key and resin (reset input). The reset input is usually connected to a physical volume up/down button. Signed-off-by: Rayyan Ansari <rayyan@ansari.sh> --- arch/arm/boot/dts/qcom-pm8226.dtsi | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-)