| Message ID | 1671702170-24781-4-git-send-email-quic_srivasam@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/7] arm64: dts: qcom: sc7280: Extract audio nodes from common idp dtsi file | expand |
On 22/12/2022 10:42, Srinivasa Rao Mandadapu wrote: > Add lpass pil node for sc7280 based audioreach platforms. > > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com> > --- > This patch depends on: > -- https://lore.kernel.org/linux-remoteproc/6e0590af-0bd1-cbef-c573-fa62b5bc9e63@quicinc.com/ > > .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 99 ++++++++++++++++++++++ > 1 file changed, 99 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi > index 1eac94e1..0ce8755 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi > @@ -110,3 +110,102 @@ > }; > }; > }; > + > +&soc { > + qcom,lpass@3000000 { Not correct name. Node names should be generic. https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation Additionally, why this is not part of SoC DTSI? Defining SoC nodes in other DTSI files is not readable and not maintainable. > + compatible = "qcom,sc7280-adsp-pil"; > + reg = <0 0x03000000 0 0x5000>, > + <0 0x0355b000 0 0x10>; Misaligned. > + > + reg-names = "qdsp6ss_base", > + "lpass_efuse"; Misaligned. > + > + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, > + <&adsp_smp2p_in 0 0>, > + <&adsp_smp2p_in 1 0>, > + <&adsp_smp2p_in 2 0>, > + <&adsp_smp2p_in 3 0>, > + <&adsp_smp2p_in 7 0>; Misaligned. What are the trailing '0'? > + > + interrupt-names = "wdog", "fatal", "ready", > + "handover", "stop-ack", "shutdown-ack"; > + qcom,qmp = <&aoss_qmp>; > + > + clocks = <&rpmhcc RPMH_CXO_CLK>, > + <&gcc GCC_CFG_NOC_LPASS_CLK>, > + <&lpasscc LPASS_QDSP6SS_XO_CLK>, > + <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>, > + <&lpasscc LPASS_QDSP6SS_CORE_CLK>; > + > + clock-names = "xo", "gcc_cfg_noc_lpass", > + "lpass_qdsp6ss_xo", > + "lpass_qdsp6ss_sleep", > + "lpass_qdsp6ss_core"; > + > + iommus = <&apps_smmu 0x1800 0x0>; > + > + power-domains = <&rpmhpd SC7280_LCX>; > + power-domain-names = "lcx"; > + required-opps = <&rpmhpd_opp_nom>; > + > + resets = <&aoss_reset AOSS_CC_LPASS_RESTART>, > + <&pdc_reset PDC_AUDIO_SYNC_RESET>; > + > + reset-names = "cc_lpass", "pdc_sync"; > + > + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>; > + > + memory-region = <&adsp_mem>; > + > + status = "okay"; Why do you need this? > + > + qcom,smem-states = <&adsp_smp2p_out 0>; > + qcom,smem-state-names = "stop"; > + > + glink-edge { > + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS > + IPCC_MPROC_SIGNAL_GLINK_QMP > + IRQ_TYPE_EDGE_RISING>; > + mboxes = <&ipcc IPCC_CLIENT_LPASS > + IPCC_MPROC_SIGNAL_GLINK_QMP>; > + > + label = "lpass"; > + qcom,remote-pid = <2>; > + > + gpr { > + compatible = "qcom,gpr"; > + qcom,glink-channels = "adsp_apps"; > + qcom,domain = <GPR_DOMAIN_ID_ADSP>; > + #address-cells = <1>; > + #size-cells = <0>; > + qcom,intents = <512 20>; > + > + q6apm: q6apm { Does not look like you tested the DTS against bindings. Please run `make dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). It's not even passing regular test - build with W=1... > + reg = <GPR_APM_MODULE_IID>; Where did you include file that define? > + compatible = "qcom,q6apm"; > + #sound-dai-cells = <0>; > + q6apmdai: dais { > + compatible = "qcom,q6apm-dais"; > + #sound-dai-cells = <1>; > + iommus = <&apps_smmu 0x1801 0x0>; > + }; > + Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi index 1eac94e1..0ce8755 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi @@ -110,3 +110,102 @@ }; }; }; + +&soc { + qcom,lpass@3000000 { + compatible = "qcom,sc7280-adsp-pil"; + reg = <0 0x03000000 0 0x5000>, + <0 0x0355b000 0 0x10>; + + reg-names = "qdsp6ss_base", + "lpass_efuse"; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&adsp_smp2p_in 0 0>, + <&adsp_smp2p_in 1 0>, + <&adsp_smp2p_in 2 0>, + <&adsp_smp2p_in 3 0>, + <&adsp_smp2p_in 7 0>; + + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", "shutdown-ack"; + qcom,qmp = <&aoss_qmp>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_CFG_NOC_LPASS_CLK>, + <&lpasscc LPASS_QDSP6SS_XO_CLK>, + <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>, + <&lpasscc LPASS_QDSP6SS_CORE_CLK>; + + clock-names = "xo", "gcc_cfg_noc_lpass", + "lpass_qdsp6ss_xo", + "lpass_qdsp6ss_sleep", + "lpass_qdsp6ss_core"; + + iommus = <&apps_smmu 0x1800 0x0>; + + power-domains = <&rpmhpd SC7280_LCX>; + power-domain-names = "lcx"; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&aoss_reset AOSS_CC_LPASS_RESTART>, + <&pdc_reset PDC_AUDIO_SYNC_RESET>; + + reset-names = "cc_lpass", "pdc_sync"; + + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>; + + memory-region = <&adsp_mem>; + + status = "okay"; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + qcom,intents = <512 20>; + + q6apm: q6apm { + reg = <GPR_APM_MODULE_IID>; + compatible = "qcom,q6apm"; + #sound-dai-cells = <0>; + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1801 0x0>; + }; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + }; + + q6prm: q6prm { + reg = <GPR_PRM_MODULE_IID>; + compatible = "qcom,q6prm"; + #clock-cells = <2>; + q6prmcc: cc { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; +};