| Message ID | 2fca168d-9f31-1c50-ebde-3e4023d84423@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | i2c: i801: Series with minor improvements | expand |
Hi Heiner, On Mon, 19 Dec 2022 19:20:55 +0100, Heiner Kallweit wrote: > Currently configuring command register settings is disributed over multiple > functions. At first cetralize this for non-block commands in Typo: cetralize -> centralize. > i801_simple_transaction(). > > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> > --- > drivers/i2c/busses/i2c-i801.c | 31 ++++++++++++++----------------- > 1 file changed, 14 insertions(+), 17 deletions(-) I'm happy with the idea (well I kind of suggested it in the first place, so...), and pleased to see that the diffstats confirm it was a good idea. > diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c > index d7182f7c8..0d49e9587 100644 > --- a/drivers/i2c/busses/i2c-i801.c > +++ b/drivers/i2c/busses/i2c-i801.c > @@ -738,35 +738,47 @@ static void i801_set_hstadd(struct i801_priv *priv, u8 addr, char read_write) > > /* Single value transaction function */ > static int i801_simple_transaction(struct i801_priv *priv, union i2c_smbus_data *data, > - char read_write, int command) > + u8 addr, u8 hstcmd, char read_write, int command) See my review of patch 5 about how I don't like some of the parameter names. But I realize now that this problem predates your patches, functions i801_block_transaction_by_block() and i801_block_transaction_byte_by_byte() already carry the confusion. So I'm fine leaving it as is for now, maybe we can clean it up later driver-wide. > { > int xact, ret; > > switch (command) { > case I2C_SMBUS_QUICK: > + i801_set_hstadd(priv, addr, read_write); > xact = I801_QUICK; > break; > case I2C_SMBUS_BYTE: > + i801_set_hstadd(priv, addr, read_write); > + if (read_write == I2C_SMBUS_WRITE) > + outb_p(hstcmd, SMBHSTCMD(priv)); > xact = I801_BYTE; > break; > case I2C_SMBUS_BYTE_DATA: > + i801_set_hstadd(priv, addr, read_write); > if (read_write == I2C_SMBUS_WRITE) > outb_p(data->byte, SMBHSTDAT0(priv)); > + outb_p(hstcmd, SMBHSTCMD(priv)); > xact = I801_BYTE_DATA; > break; > case I2C_SMBUS_WORD_DATA: > + i801_set_hstadd(priv, addr, read_write); > if (read_write == I2C_SMBUS_WRITE) { > outb_p(data->word & 0xff, SMBHSTDAT0(priv)); > outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); > } > + outb_p(hstcmd, SMBHSTCMD(priv)); > xact = I801_WORD_DATA; > break; > case I2C_SMBUS_PROC_CALL: > + i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE); > outb_p(data->word & 0xff, SMBHSTDAT0(priv)); > outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); > + outb_p(hstcmd, SMBHSTCMD(priv)); > + read_write = I2C_SMBUS_READ; > xact = I801_PROC_CALL; > break; > default: > + pci_err(priv->pci_dev, "Unsupported transaction %d\n", command); > return -EOPNOTSUPP; > } The split between patches 7 and 8 isn't really clean, as you have dead code here at this step, which will only become active with the next patch. I'm willing to let it go though. > > @@ -857,25 +869,10 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, > > switch (size) { > case I2C_SMBUS_QUICK: > - i801_set_hstadd(priv, addr, read_write); > - break; > case I2C_SMBUS_BYTE: > - i801_set_hstadd(priv, addr, read_write); > - if (read_write == I2C_SMBUS_WRITE) > - outb_p(command, SMBHSTCMD(priv)); > - break; > case I2C_SMBUS_BYTE_DATA: > - i801_set_hstadd(priv, addr, read_write); > - outb_p(command, SMBHSTCMD(priv)); > - break; > case I2C_SMBUS_WORD_DATA: > - i801_set_hstadd(priv, addr, read_write); > - outb_p(command, SMBHSTCMD(priv)); > - break; > case I2C_SMBUS_PROC_CALL: > - i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE); > - outb_p(command, SMBHSTCMD(priv)); > - read_write = I2C_SMBUS_READ; > break; > case I2C_SMBUS_BLOCK_DATA: > i801_set_hstadd(priv, addr, read_write); > @@ -922,7 +919,7 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, > if (block) > ret = i801_block_transaction(priv, data, read_write, size); > else > - ret = i801_simple_transaction(priv, data, read_write, size); > + ret = i801_simple_transaction(priv, data, addr, command, read_write, size); > > /* Some BIOSes don't like it when PEC is enabled at reboot or resume > * time, so we forcibly disable it after every transaction. Reviewed-by: Jean Delvare <jdelvare@suse.de>
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index d7182f7c8..0d49e9587 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -738,35 +738,47 @@ static void i801_set_hstadd(struct i801_priv *priv, u8 addr, char read_write) /* Single value transaction function */ static int i801_simple_transaction(struct i801_priv *priv, union i2c_smbus_data *data, - char read_write, int command) + u8 addr, u8 hstcmd, char read_write, int command) { int xact, ret; switch (command) { case I2C_SMBUS_QUICK: + i801_set_hstadd(priv, addr, read_write); xact = I801_QUICK; break; case I2C_SMBUS_BYTE: + i801_set_hstadd(priv, addr, read_write); + if (read_write == I2C_SMBUS_WRITE) + outb_p(hstcmd, SMBHSTCMD(priv)); xact = I801_BYTE; break; case I2C_SMBUS_BYTE_DATA: + i801_set_hstadd(priv, addr, read_write); if (read_write == I2C_SMBUS_WRITE) outb_p(data->byte, SMBHSTDAT0(priv)); + outb_p(hstcmd, SMBHSTCMD(priv)); xact = I801_BYTE_DATA; break; case I2C_SMBUS_WORD_DATA: + i801_set_hstadd(priv, addr, read_write); if (read_write == I2C_SMBUS_WRITE) { outb_p(data->word & 0xff, SMBHSTDAT0(priv)); outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); } + outb_p(hstcmd, SMBHSTCMD(priv)); xact = I801_WORD_DATA; break; case I2C_SMBUS_PROC_CALL: + i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE); outb_p(data->word & 0xff, SMBHSTDAT0(priv)); outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); + outb_p(hstcmd, SMBHSTCMD(priv)); + read_write = I2C_SMBUS_READ; xact = I801_PROC_CALL; break; default: + pci_err(priv->pci_dev, "Unsupported transaction %d\n", command); return -EOPNOTSUPP; } @@ -857,25 +869,10 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, switch (size) { case I2C_SMBUS_QUICK: - i801_set_hstadd(priv, addr, read_write); - break; case I2C_SMBUS_BYTE: - i801_set_hstadd(priv, addr, read_write); - if (read_write == I2C_SMBUS_WRITE) - outb_p(command, SMBHSTCMD(priv)); - break; case I2C_SMBUS_BYTE_DATA: - i801_set_hstadd(priv, addr, read_write); - outb_p(command, SMBHSTCMD(priv)); - break; case I2C_SMBUS_WORD_DATA: - i801_set_hstadd(priv, addr, read_write); - outb_p(command, SMBHSTCMD(priv)); - break; case I2C_SMBUS_PROC_CALL: - i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE); - outb_p(command, SMBHSTCMD(priv)); - read_write = I2C_SMBUS_READ; break; case I2C_SMBUS_BLOCK_DATA: i801_set_hstadd(priv, addr, read_write); @@ -922,7 +919,7 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, if (block) ret = i801_block_transaction(priv, data, read_write, size); else - ret = i801_simple_transaction(priv, data, read_write, size); + ret = i801_simple_transaction(priv, data, addr, command, read_write, size); /* Some BIOSes don't like it when PEC is enabled at reboot or resume * time, so we forcibly disable it after every transaction.
Currently configuring command register settings is disributed over multiple functions. At first cetralize this for non-block commands in i801_simple_transaction(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/i2c/busses/i2c-i801.c | 31 ++++++++++++++----------------- 1 file changed, 14 insertions(+), 17 deletions(-)