@@ -803,7 +803,7 @@ static int i801_simple_transaction(struct i801_priv *priv, union i2c_smbus_data
/* Block transaction function */
static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
- char read_write, int command)
+ u8 addr, u8 hstcmd, char read_write, int command)
{
int result = 0;
unsigned char hostc;
@@ -813,7 +813,29 @@ static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *
else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
return -EPROTO;
- if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ switch (command) {
+ case I2C_SMBUS_BLOCK_DATA:
+ i801_set_hstadd(priv, addr, read_write);
+ outb_p(hstcmd, SMBHSTCMD(priv));
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ /*
+ * NB: page 240 of ICH5 datasheet shows that the R/#W
+ * bit should be cleared here, even when reading.
+ * However if SPD Write Disable is set (Lynx Point and later),
+ * the read will fail if we don't set the R/#W bit.
+ */
+ i801_set_hstadd(priv, addr,
+ priv->original_hstcfg & SMBHSTCFG_SPD_WD ?
+ read_write : I2C_SMBUS_WRITE);
+ if (read_write == I2C_SMBUS_READ) {
+ /* NB: page 240 of ICH5 datasheet also shows
+ * that DATA1 is the cmd field when reading
+ */
+ outb_p(hstcmd, SMBHSTDAT1(priv));
+ } else
+ outb_p(hstcmd, SMBHSTCMD(priv));
+
if (read_write == I2C_SMBUS_WRITE) {
/* set I2C_EN bit in configuration register */
pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
@@ -824,6 +846,13 @@ static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *
"I2C block read is unsupported!\n");
return -EOPNOTSUPP;
}
+
+ break;
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ /* Needs to be flagged as write transaction */
+ i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE);
+ outb_p(hstcmd, SMBHSTCMD(priv));
+ break;
}
/* Experience has shown that the block buffer can only be used for
@@ -852,7 +881,7 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data *data)
{
- int hwpec, ret, block = 0;
+ int hwpec, ret;
struct i801_priv *priv = i2c_get_adapdata(adap);
mutex_lock(&priv->acpi_lock);
@@ -867,57 +896,16 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
&& size != I2C_SMBUS_QUICK
&& size != I2C_SMBUS_I2C_BLOCK_DATA;
- switch (size) {
- case I2C_SMBUS_QUICK:
- case I2C_SMBUS_BYTE:
- case I2C_SMBUS_BYTE_DATA:
- case I2C_SMBUS_WORD_DATA:
- case I2C_SMBUS_PROC_CALL:
- break;
- case I2C_SMBUS_BLOCK_DATA:
- i801_set_hstadd(priv, addr, read_write);
- outb_p(command, SMBHSTCMD(priv));
- block = 1;
- break;
- case I2C_SMBUS_I2C_BLOCK_DATA:
- /*
- * NB: page 240 of ICH5 datasheet shows that the R/#W
- * bit should be cleared here, even when reading.
- * However if SPD Write Disable is set (Lynx Point and later),
- * the read will fail if we don't set the R/#W bit.
- */
- i801_set_hstadd(priv, addr,
- priv->original_hstcfg & SMBHSTCFG_SPD_WD ?
- read_write : I2C_SMBUS_WRITE);
- if (read_write == I2C_SMBUS_READ) {
- /* NB: page 240 of ICH5 datasheet also shows
- * that DATA1 is the cmd field when reading */
- outb_p(command, SMBHSTDAT1(priv));
- } else
- outb_p(command, SMBHSTCMD(priv));
- block = 1;
- break;
- case I2C_SMBUS_BLOCK_PROC_CALL:
- /* Needs to be flagged as write transaction */
- i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE);
- outb_p(command, SMBHSTCMD(priv));
- block = 1;
- break;
- default:
- dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
- size);
- ret = -EOPNOTSUPP;
- goto out;
- }
-
if (hwpec) /* enable/disable hardware PEC */
outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
else
outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
SMBAUXCTL(priv));
- if (block)
- ret = i801_block_transaction(priv, data, read_write, size);
+ if (size == I2C_SMBUS_BLOCK_DATA ||
+ size == I2C_SMBUS_I2C_BLOCK_DATA ||
+ size == I2C_SMBUS_BLOCK_PROC_CALL)
+ ret = i801_block_transaction(priv, data, addr, command, read_write, size);
else
ret = i801_simple_transaction(priv, data, addr, command, read_write, size);
@@ -926,7 +914,6 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
*/
if (hwpec)
outb_p(inb_p(SMBAUXCTL(priv)) & ~SMBAUXCTL_CRC, SMBAUXCTL(priv));
-out:
/*
* Unlock the SMBus device for use by BIOS/ACPI,
* and clear status flags if not done already.
Similar to the patch for non-block commands, centralize block command register settings in i801_block_transaction(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/i2c/busses/i2c-i801.c | 85 +++++++++++++++-------------------- 1 file changed, 36 insertions(+), 49 deletions(-)